Bộ Chia Tín Hiệu Dn21000

3 triệu

85/15A Nguyễn Hữu Dật, Phường Tây Thạnh, Q. Tân Phú, Tp.hcm

CTY ÂU MỸ LÀ ĐẠI DIỆN DRAGO TẠI VIỆN NAM

CHUYÊN CUNG CẤP BỘ CHIA TÍN HIỆU DRAGO

BỘ CHIA TÍN HIỆU DN21000, BỘ CHIA TÍN HIỆU DN22000, BỘ CHIA TÍN HIỆU 4....20mA

BỘ CHUYỂN ĐỔI TÍN HIỆU DRAGO

TÍN NĂNG KỸ THUẬT BỘ CHIA TÍN HIỆU DN 21000

Technical Data

Input

Input signal	0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V calibrated switchable
Input resistance	Current input Voltage input	≤ 35 Ohm ≥ 100 kOhm
Overload	Current input Voltage input	≤ 50 mA ≤ 30 V
Transmitter supply voltage	16 V (open circuit voltage < 22 V)
Max. supply current	< 35 mA

Output I + II

Output signal	0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V calibrated switchable
Load	Current output: ≤ 6 V (300 Ohm at 20 mA)	Voltage output: ≤ 5 mA (2 kOhm at 10 V)
Offset	Current output: < 20 µA	Voltage output: < 10 mV
Linear transmission range	-1 to +110 %
Ripple	< 10 mVeff

General Data

Transmission error	< 0.1 % full scale
Temperature coefficient 1)	< 100 ppm/K
Cut-off frequency	5 kHz
Response time (T10-90)	100 µs
Test voltage	3 kV, 50 Hz, 1 min, Input against Output I against Output II against power supply
Working voltage 2) (Basic Insulation)	Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
Protection against electrical shock	Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
Ambient temperature	Operation Transport and storage	–25 °C to +70 °C (-13 to +158 °F) –40 °C to +85 °C (-40 to +185 °F)
Power supply	24 V DC 16.8 V to 31.2 V DC, approx. 1.3 W
EMC 3)	EN 61326-1
Construction	6.2 mm housing, protection class: IP 20
Weight	Approx. 70 g

Average TC based on the final value in specified operating temperature range
As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
Minor deviations possible during interference

Block diagram

Dimensions

Terminal assignments

1	+	Input -I +U +Loop
2	-	Input +I -U -Loop

3	+	Output II
4	-	Output II

5	+	Output I
6	-	Output I

7	+	Power supply (connected to In-Rail-Bus)
8	-	Power supply (connected to In-Rail-Bus)

Connection
Captive plus-minus clamp screws
Wire cross-section max. 2.5 mm² / AWG 14
Stripped length 6 to 8 mm / 0.28 in
Screw terminal torque 0.8 Nm / 7 lbf in
Optional power connection via In-Rail-Bus (see accessories)

Liên hệ để được tư vấn:

Thanks and best regards

Long Tran

Mob.: +84 909 006 435+84 909 006 435

Email.: long.tran@aumyco.com

AU MY technology Service Trading Company limited

Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam

Tel.: +84 3 816 2902 Fax: +84 3 816 2902

Web.: www.aumyco.com Email.: info@aumyco.com

www.tbcongnghiep.com

www.chuyendoitinhieu.com

www.doluongcongnghiep.com

Từ khóa gợi ý: Bộ Chia Tín Hiệu Bộ Chia Tín Hiệu Chia Tín Hiệu Chia Tín Hiệu Bộ Chia Tín Hiệu Hdmi Bộ Chia Tín Hiệu Ra Bộ Chia Tín Hiệu Tivi Bộ Chia Tín Hiệu Loại Bộ Chia Tín Hiệu Vga Bộ Chia Tín Hiệu Cáp Bộ Chia Tín Hiệu Cổng Bộ Chia Tách Tín Hiệu Bộ Chia Tín Hiệu Rf Bộ Chia Tín Hiệu Mạng Bộ Chia Tín Hiệu Eight Bộ Chia Tín Hiệu Way Bộ Chia Tín Hiệu Av Bộ Chia Tín Hiệu Tv Bộ Chia Tín Hiệu Pacific Bộ Chia 2 Tín Hiệu

Bình luận

Tran Minh Long

HẾT HẠN

Mã số :	11122335
Địa điểm :	Hồ Chí Minh
Hình thức :	Cần bán
Tình trạng :	Hàng mới
Hết hạn :	17/12/2020
Loại tin :	Thường