Bộ Dung Dịch Chuẩn Horiba Nhật Bản

NIST pH Buffer Solution Kit 

Model No: 501-S

pH 4.01 ±0.02 Buffer Solution at 25°C 250ml

pH 6.86 ±0.02  Buffer Solution at 25°C 250ml

pH 9.18 ±0.02  Buffer Solution at 25°C 250ml

3.33M KCl Internal Reference Solution 250ml

USA pH Buffer Solution Kit 

Model No: 502-S

pH 4.01 ±0.02 Buffer Solution at 25°C 250ml

pH 7.00 ±0.02  Buffer Solution at 25°C 250ml

pH 10.01 ±0.02  Buffer Solution at 25°C 250ml

3.33M KCl Internal Reference Solution 250ml

Conductivity Standard Solution Kit 

Model No: 503-S

84 uS/cm Conductivity Solution at 25°C 250ml

1413 uS/cm Conductivity Solution at 25°C 250ml

12.88 mS/cm Conductivity Solution at 25°C 250ml

111.8 mS/cm Conductivity Solution at 25°C 250ml

pH 1.68 Buffer Solution 

Model No: 500-2

pH 1.68 ±0.02 at 25°C 500ml

pH 4.01 Buffer Solution 

Model No: 500-4

pH 4.01 ±0.02 at 25°C 500ml

pH 6.86 Buffer Solution 

Model No: 500-686

pH 6.86 ±0.02 at 25°C 500ml

pH 7.00 Buffer Solution 

Model No: 500-7

pH 7.00 ±0.02 at 25°C 500ml

pH 9.18 Buffer Solution 

Model No: 500-9

pH 9.18 ±0.02 at 25°C 500ml

pH 10.01 Buffer Solution 

Model No: 500-10

pH 10.01 ±0.02 at 25°C 500ml

pH 12.46 Buffer Solution 

Model No: 500-12

pH 12.46 ±0.02 at 25°C 500ml

84 uS/cm Conductivity Standard Solution 

Model No: 500-21

84 uS/cm at 25°C 500ml

1413 uS/cm Conductivity Standard Solution 

Model No: 500-22

1413 uS/cm at 25°C 500ml

12.88 mS/cm Conductivity Standard Solution 

Model No: 500-23

12.88 mS/cm at 25°C 500ml

111.8 mS/cm Conductivity Standard Solution 

Model No: 500-24

111.8 mS/cm at 25°C 500ml

3.33M KCl Internal Reference Solution 

Model No: 525-3

3.33M KCl 250ml

Internal Solution for Reference Electrode Type 300 

The original solution should be used as it is. Powder for internal solution (350) is also available for a large amount of internal solution. (The powder is used by dissolving it in pure water.)

Internal Solution for Reference Electrode 310 

The original solution should be used as it is. Powder for internal solution (350) is also available for a large amount of internal solution. (The powder is used by dissolving it in pure water.)

Powder for Internal Solution for Reference Electrode 350 

500g. Dissolve in 2L of pure water.

Powder for ORP Standard Solution 160-51 

The ORP values shown are those obtained when one packet is dissolved in 250 mL of pure water. This standard solution should be used immediately after conditioning and can-not be used for 2 hours or more.(10 packets per set)

Powder for ORP Standard Solution 160-22 

The ORP values shown are those obtained when one packet is dissolved in 250 mL of pure water. This standard solution should be used immediately after conditioning and can-not be used for 2 hours or more.(10 packets per set)