Bánh Nỉ Vải Đánh Bóng Inox - Kim Loại - Đồ Trang Sức - Nhập Từ Chlb Đức

	1. UNTREATED MUSLIN BUFF For all purpose cut / color and color operations on all metals and non metals.
	2. WHITE BLEACHED MUSLIN BUFF For color operation on all metals and non metals.
	3. HARD WHITE BUFF For cut / color and color operations on all metals.
	4. MILL TREATED MUSLIN BUFF Better compound retention and last longer than untreated muslin buffs with faster ability to cut / color and color on all metals.
	5. SISAL & CLOTH BUFF For cut and cut / color operation on all metals.
	6. FULL DISC SISAL BUFF For cut operation on all metals. Dip treatment is recommended for more firmness and longer buff life.
	7. HARD COLORED COTTON BUFF For all purpose cut / color operation on all metals.
	8. SOFT COLORED COTTON BUFF For general cut / color operation on precious metals.
	9. UNTREATED COTTON SET–UP WHEEL Use as polishing wheel for cut / color and set-up wheel with medium - fine emery grain for cut operation on all metals.
	10. LEATHER SET–UP WHEEL Use as set-up wheel with fine emery grain for cut operation on all metals.
	11. JEAN & COLORED COTTON SET–UP WHEEL Use as polishing wheel for cut / color and set-up wheel with coarse – medium emery grain for cut operation on all metals.
	12. HARD COLORED COTTON SET–UP WHEEL Use as set-up wheel with coarse emery grain for cut operation on all metals

 

	1. UNTREATED MUSLIN BUFF Use for all polishing job on all metals, precious metals, and non-metals. Materials available are general purpose muslin, heavy thread muslin or fine muslin.
	2. WHITE BLEACHED MUSLIN BUFF Use for fine coloring operation on all metals, precious metals and non-metals. Materials available are general purpose muslin or fine muslin.
	3. YELLOW TREATED MUSLIN BUFF Good compound retention with ability to cut faster and last longer than untreated muslin buffs on all metals and precious metals. Materials available are general purpose muslin or heavy thread muslin.
	4. GREEN TREATED MUSLIN BUFF Good compound retention with more cutting power and last longer than YELLOW TREATED MUSLIN BUFFS on all metals and precious metals. Materials available are general purpose muslin or heavy thread muslin.
	5. BLUE TREATED MUSLIN BUFF Good compound retention with most aggressive cutting power and last longer than YELLOW and GREEN TREATED MUSLIN BUFFS on all metals and precious metals. Materials available are general purpose muslin or heavy thread muslin.
	6. PURPLE TREATED MUSLIN BUFF Good compound retention. This buff is an ideal buff for fine final coloring with ability in fine cutting operation on all metals and precious metals especially platinum. Materials available is fine muslin.
	7. MIDGET BUFF These small size buffs are to be mounted on small mandrel use with spindle hand tool or flexible shaft. Materials available are untreated muslin, white bleached muslin, yellow, green, blue, and purple treated muslin.
	8. RAZOR EDGE ( KNIFE EDGE ) BUFF This buff is designed as a knife edge with 1/4” spacing concentric sewn to perform cutting operation on recessed area on all metals and precious metals. Materials available are yellow, green, blue, and purple treated muslin.
	9. SOFT COLORED COTTON BUFF This economic mix color buff has been existed among Thai jewelers for many generations. It is low cost and work well on conventional polishing on all metals and precious metals.
	10. SISAL BUFF Offer aggressive cutting operation on all metals. Each buff is spirally sewn with or without reinforced leather center.

 

 

	1. UNTREATED AIRWAY CLOTH BUFF For color operation on all metals and non matals when good flexibility is required.
	2. MILL TREATED AIRWAY CLOTH BUFF For cut / color and color operation on all metals. Offer better compound retention, longer buff life, and more firmness than untreated airway cloth buff.
	3. DIP TREATED AIRWAY CLOTH BUFF For cut and cut / color operation on all metals. Offer better compound retention, longer buff life, and more firm than mill treated airway cloth buff.
	4. SEWN AIRWAY CLOTH BUFF For cut and cut / color operation in narrow area on all metal.
	5. PLEATED AIRWAY CLOTH BUFFS For all metal with hard to reach contours. - ACCORDION ( narrow folds ) : More flexibility for cut / color and color operation. - DOUBLE FLUTED ( wider folds ) : Less flexibility for cut / color and color operation.
	6. FINGER BUFFS For all metals surface with deep reset area and contours. - CLOTH AND SISAL FINGER : More aggressive for cut operation. - OUR CLOTH FINGER : More flexibility in cut / color operation.
	7. MINI AIRWAY CLOTH BUFFS Good for small internal and external cut / color and color operation on all metals applications such as tableware and cutlery.
	8. NON – WOVEN AIRWAY BUFF Good for satin finishing with no compound needed on all metals with irregular contours.
	9. CLOSED FACE BIAS SISAL BUFF Excellent for aggressive cut operation on all metals. Dip treatment is recommended for extra hardness and buff life.
	10. OPEN DOUBLE CLOTH BIAS SISAL BUFF ( ODCBS ) Offer flexibility with cool running for cut and cut / color operation on all metals with irregular contours. Dip treatment is recommended for extra hardness and buff life.
	11. PLEATED DOUBLE CLOTH BIAS SISAL BUFF Offers aggressiveness for cut and cut / color operations on all metals with irregular contours. Dip treatment is recommended for extra hardness and buff life.
	12. SISAL CORD BUFF Each independent sisal cord works extremely flexible for cut / color on all metals with complicated surfaces. Dip treatment is recommended for extra hardness and buff life.

    Để lựa chọn đúng thông số, nhu cầu, giải pháp xin vui lòng liên hệ:

         Lê Duy                                               Công ty Kỹ Thuật Công Nghiệp Hưng Phát

         HP: 0938.50.2233                              404 Trường Chinh, P13, Q. Tân Bình, HCM

         Web: http://www.thietbicokhivn.c...               Email:  duytrinhgtvt@gmail.com