Liên hệ
I D3, Kdc Mieu Noi, Dinh Tien Hoang St., W.3, Binh Thanh Dist., Hcmc, Vietnam
liên hệ : 0902937088 l Ms Lien l
Email : lien.ans@ansvietnam.com
BEKOMAT 3, 6, 8, 9
BEKO TECHNOLOGIES transforms its international experience of more than 25 years into a new BEKOMAT generation. With innovations which offer unprecedented advantages to the users.
BEKOMAT 31/32/33 combines new solutions and significant advances in technology. Even more reliability, fast and smooth installation, maintenance with minimum time requirements BEKO TECHNOLOGIES achieves these targets through an innovative construction which consists of only two or three units with quick release connectors. This means the new BEKOMAT can be serviced in seconds, without decoupling from the pipework system.
The devices of this new generation are made up of only two modules: a service unit com- prising the corrosion-resistant aluminium housing together with all maintenance-relevant components, and an electronic control and sensor unit which is installed only once. Both modules are coupled via a practical snap connection.
This design makes it possible to replace all parts subject to wear or requiring maintenance in one go: the old service unit is simply and quickly removed and a new, works-tested unit is fitted instead. The separation and connection of the two modules requires no tools - it''s all done in next to no time.
BEKO TECHNOLOGIES transforms its international experience of more than 25 years into a new BEKOMAT generation. With innovations which offer unprecedented advantages to the users.
BEKOMAT 31/32/33 combines new solutions and significant advances in technology. Even more reliability, fast and smooth installation, maintenance with minimum time requirements BEKO TECHNOLOGIES achieves these targets through an innovative construction which consists of only two or three units with quick release connectors. This means the new BEKOMAT can be serviced in seconds, without decoupling from the pipework system.
The devices of this new generation are made up of only two modules: a service unit com- prising the corrosion-resistant aluminium housing together with all maintenance-relevant components, and an electronic control and sensor unit which is installed only once. Both modules are coupled via a practical snap connection.
This design makes it possible to replace all parts subject to wear or requiring maintenance in one go: the old service unit is simply and quickly removed and a new, works-tested unit is fitted instead. The separation and connection of the two modules requires no tools - it''s all done in next to no time.
If the condensate from the intercoolers is not reliably drained in multistage compressors, it will reach the next compressor stage. BEKOMAT LA/LP prevents damage through “drop attacks”, condensate buildup and water hammers.
Especially employable for condensate drainage in vacuum or pressureless systems at operating pressures from 0.1 to 1.8 bar (abs.).
Special units are also available for the application in hazardous areas (II 2G EEX ib IIB T4 / explosion class II B, temperature class T4) where ignition sources need to be prevented. Permissible fluids are ethane, methane, town gas, diesel fuel, ethylene, propane, fuel oil and compressor oil.
For the drainage of particularly aggressive condensates.
Replacement filters
Activated-carbon adsorber
Activated-carbon filter with cartridge
The CLEARPOINT filter technology guarantees low operating costs, long service lives, outstanding process reliability and the safe filtration of aerosols, oil and dust. The comprehensive range of products covers a performance spectrum between 35 and 34,680 m³/h (at 7 bar) and includes threaded and flanged filters, as well as high-pressure filters up to 500 bar.
Through the innovative 3E filter elements (3E = Energy Efficient Element) and a flow-optimised, corrosion-protected housing construction, CLEARPOINT offers safe and reliable filtration and qualitatively better compressed air at significantly reduced operating costs.
With a unique fibre structure and a new manufacturing technology, the filter elements of the CLEARPOINT series set new standards in compressed-air filtration.
Material and method optimised
For the 3E filter elements, binding agents are not used at all. For the new medium, micro-fine borosilicate fibres and polyester fibres are thermally fused. In this respect, a high number of fibres with a smaller diameter ensure a finer fibre structure. The material thus boasts a separation surface which is four times larger than conventional filter media, and a larger cavity volume.
Filtering with 3E: extra efficient
The long-term-stable composite of the fibres guarantees a high separation rate over the entire depth of the filter bed and sustainably supports the dirt absorption capacity. In addition, this structure ensures perfect fluid mechanics and thus additionally reduces the pressure difference. The results are significant energy savings of up to 40% at maximum filtration performance.
The comprehensive refrigeration dryer range of products. The suitable solution for every task. With extremely low flow resistances.
Customer-orientated, made-to-measure plant construction
Overrunning of compressed air treatment systems can create serious problems
Compressed air which is contaminated by oil is a danger for production plants, the environment or even for health. "Oil-free" compressors are no guarantor for "oil-free" compressed air because of the ambient air/induction air. In most cases, a certain residual oil content cannot be entirely avoided in standard applications. Precise monitoring of the oil vapour content which is possible at all times is therefore all the more important.
HẾT HẠN
Mã số : | 7566108 |
Địa điểm : | Hồ Chí Minh |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 27/05/2019 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận