Đồng Hồ Đo Áp Suất Màng Wise P710-P720-P730

Liên hệ

D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh


PITESCO Việt Nam - Công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu hướng công nghiệp hóa, hiện đại hóa.

Liên hệ cho chúng tôi theo số: 0914. 738.179 để được tư vấn 

Email :  linh.pitesco@gmail.com 

 Văn phòng Đồng Nai

261 tổ 19,QL 51, Kp 1, P Long Bình Tân, Tp Biên Hòa, Đồng Nai

Pitesco Vietnam JSC.,

Add: D5 Mieu Noi Resident, Dinh Tien Hoang St, W.3, Binh Thanh, TP HCM

Diaphragm seal type pressure gauge 
Model : P710-P720-P730
Catalogue Download : 

Service intended

Suitable for the situation Where the process medium would corrode the instrument connection and pressure sensing element. Where the process medium contains suspended solids,or is sufficiently viscous to clog the instrument connection and pressure sensing element. Where the process medium might freeze or solidify in the instrument connection and pressure sensing element due to ambient or process temperature change. Where the process medium requires flushing from the system to prevent contamination.

Design

Internal diaphragm

Accuracy

Refer to gauge model

Suitable Pressure range (MPa, kPa, bar)

●-0.1 ~ 0 to -0.1 ~2.5kPa 
●0 ~ 0.1 to 0 ~ 35MPa

Filling liquid

Silicon oil KF96(-20~200°C)

Working temperature

Temperature rating of the diaphragm seals depend on the fill fluid the diaphragm material and the lower housing material. standard fill fluids are available for temperature ranges from -20°C to 200°C

Diaphragm material

Diaphragms are available in many corrosion resistant materials. Compatibility of selected material and process fluid is the responsibility of user.


Upper flange (gauge side)

Stainless steel (304SS, 316SS)

Diaphragm

●Stainless steel(316LSS)
●Monel, Hastelloy-C 
●Tianium, Tantalum, Nickel, Alloy20

Under flange (Process side)

●Stainless steel (304SS, 304LSS, 316SS, 316LSS) 
●Monel, Hastelloy-C, Titanium, Nickel

Process connection

●Model P710 : PT, NPT & PF Feasible 
●Model P720- P730 : Flanges to ANSI- JIS or other Standard

Optional extras

●Diaphragm and lower flange are available in PTFE coating or PTFE lining (see note) 
●Lower body (process side) are available in purging plug or heater jacket.

Note

●PTFE lining is available up to 10MPa (coating) for P720 and P730 series.



Bình luận

HẾT HẠN

0914 738 179
Mã số : 8252956
Địa điểm : Hồ Chí Minh
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 21/08/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn