| ![](http://hynux.net/eng/mall/mark/pictogram/panel/sampling.jpg) Model | MP3-A | MP3-B | MP6-A | MP6-B | Appearance |
|
|
|
| 96(W) x 48(H) x 100(D) | 72(W) x 36(H) x 100(D) | Power Supply | 100 ~ 240 V AC 50 - 60Hz allowable operating voltage range : 85 ~ 110 % | Power Consumption | 7 VA | Display | 7 segment LED Display | Insulation Resistance | 100 MΩ min. (at 500 V DC) between external terminal and case | Dielectric Strength | 2000 V AC min. for 1 minute between external terminal and case | Noise Immunity | By noise simulator, square-shaped wave noise, pulse width 1 µs , ± 1000 V | Vibration Resistance | Malfunction : 10 ~ 55 Hz Single amplitude 0.5 mm X•Y•Z each direction for 1 hour | Durability : 10 ~ 55 Hz Single amplitude 0.75 mm X•Y•Z each direction for 2 hours | Shock Resistance | Malfunction : 100 m/s2 for 3 times each in X•Y•Z direction | Durability : 300 m/s2 for 3 times each in X•Y•Z direction | Operating Ambient temperature | -10 ~ +55 °C (with no freezing) | Operating Ambient Humidity | Relative Humidity 35 ~ 85 % RH | Operating Circumstance | With no corrosive gas | Storage Ambient Temperature | -20 ~ 65 °C (with no freezing) | Relay Life Expectancy |
Mechanical: 20,000,000 ps Min. | Electrical: 100,000 ps Min. |
| Net Weight | Approx. 180 g |
Model | Suffix Code | Description | MP | ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | | Aspect Dimension | 3 | | | | | Aspect 96 x 48 mm | 6 | | | | | Aspect 72 x 36 mm | Displayable Digits | 4 | | | | 4 digits (9999) | 5 | 25 | | | 5 digits (99999) | Measurement Input Specification | DV | | | d.c VOLT | DA | | | d.c AMPERE | AV | | | a.c VOLT | AA | | | a.c AMPERE | AVR | | | a.c VOLT(RMS) | AAR | | | a.c AMPERE(RMS) | Output Specification (Option) | N | | Display only | 0 | | Relay Output(HI,GO,LO) + Current Output(4~20 mA) | 1 | | Relay Output (HI, GO, LO) | 2 | | NPN Open Collector Output(HI,GO,LO), BCD Output(Static) | 3 | | PNP Open Collector Output(HI,GO,LO), BCD Output(Static) | 4 | | NPN Open Collector Output(HI,GO,LO), Current Output(4~20 mA) | 5 | | PNP Open Collector Output(HI,GO,LO), Current Output(4~20 mA) | 6 | | NPN Open Collector Output(HI,GO,LO), Serial Output(low speed) | 7 | | PNP Open Collector Output(HI,GO,LO), Serial Output(low speed) | 8 | | NPN Open Collector Output(HI,GO,LO), RS485 Output | 9 | | PNP Open Collector Output(HI,GO,LO), RS485 Output | Type | A | Acrylic type | B | Table type |
* | Current Output about PV (present value) | * | Output Specification, 0 ~ 9, is “OPTION.” | * | The specification of this manual may be changed without a prior notification due to its improvement | * | When measuring a current higher than DC 5 A, an exclusive shunt will be necessary so please choose | | “Type of DC Volt” when you are ordering. |
|
Bình luận