Liên hệ
66 Đường 36 Khu Đô Thị Vạn Phúc Thủ Đức
Raytek Vietnam,Cảm biến nhiệt độ hồng ngoại Raytek CI- Raytek RAYCI2A
Cảm biến nhiệt độ hồng ngoại Raytek CI- Raytek RAYCI2A Infrared Temperature Sensor
Tên thiết bị: Cảm biến nhiệt độ hồng ngoại Raytek
Mã đặt hàng: RAYCI2A, RAYCI2B; RAYCI1A; RAYCI1B; RAYCI3A; RAYCI3B; RAYCI1AW; RAYCI2BM; RAYCI2AM; RAYCI2AW; RAYCI3BM
Nhà sản xuất: (Raytek) Fluke – USA/ China origin
Nhà cung cấp: (Raytek) Fluke Việt Nam, (Raytek) Fluke Vietnam
Data sheet: https://www.raytek-direct.com/product/raytek-rayci2a-fixed-ir-sensor-type-k-output-0-to-115c
Cảm biến nhiệt độ hồng ngoại Raytek RAYCI2A, Type K Output, 0 to 115°C (32 to 240°F) - Raytek RAYCI2A Infrared Temperature Sensor
Cảm biến nhiệt độ hồng ngoại Raytek CI được thiếu kế để đo nhiệt độ hồng ngoại trong một cảm biến nhỏ gọn, chi phí thấp và dễ dàng thay thế các đầu dò tiếp xúc truyền thống bằng đầu ra cặp nhiệt J hoặc K, hoặc đầu ra 0-5V, khi được tích hợp vào hệ thống 4 dây tiêu chuẩn
Dải đo nhiệt độ mục tiêu trong khoảng từ 0 đến 115 ° C (32 đến 240 ° F), các thiết bị điện tử trên bo mạch của cảm biến Raytek CI được bảo vệ bằng vỏ thép không gỉ IP 65 (NEMA-4) chắc chắn, cho phép cảm biến hoạt động ở nhiệt độ môi trường xung quanh 70 ° C (160 ° F) mà không cần làm mát. Cảm biến CI có thể chịu được nhiệt độ môi trường xung quanh trong môi trường làm mát đến 260 ° C (500 ° F)
Có thể được sử dụng trong các ứng dụng: đúc thổi, sơn phủ, gia công nhiệt, làm khô, dập nổi, đùn, tạo hình, gia nhiệt, cán, đúc, tách lớp, lát đường, in và tạo hình bằng nhiệt.
Temperature Range | 0 to 115°C (32 to 240°F) |
Temperature Resolution | <0.5°C or 1°F |
Accuracy | ±2% or ±3ºC (6°F), whichever is greater |
System Repeatability | ±1% of measured value or ±1°C (2°F), whichever is greater |
Response Time (95%) | 350 mSec |
Emissivity | Fixed at 0.95 |
Spectral Response | 7 to 18 µm |
Optical Resolution | 4:1 (Distance : Spot Size) |
Manual: https://www.raytek-direct.com/pdfs/cache/www.raytek-direct.com/rayci2a/manual/rayci2a-manual.pdf
Cảm biến nhiệt độ hồng ngoại Raytek CM- Raytek RAYCMLTV3M Infrared Temperature Sensor
Tên thiết bị: Cảm biến nhiệt độ hồng ngoại Raytek
Mã đặt hàng: RAYCMLTV3M; RAYCMLTK; RAYCMLTJ3M; RAYCMLTVM; RAYCMLTK3M; RAYCMLTKM
Nhà sản xuất: (Raytek) Fluke – USA/ China origin
Nhà cung cấp: (Raytek) Fluke Việt Nam, (Raytek) Fluke Vietnam
Cảm biến nhiệt độ hồng ngoại Raytek CM là cảm biến hồng ngoại tích hợp, nhỏ gọn, mạnh mẽ được thiết kế để theo dõi nhiệt độ liên tục, dễ dàng thay thế các đầu dò tiếp xúc truyền thống bằng đầu ra cặp nhiệt điện J hoặc K hoặc đầu ra 0-5V có thể mở rộng, nếu ứng dụng của cần hoạt động trong môi trường yên tĩnh
Mặc dù có kích thước nhỏ nhưng cảm biến CM được trang bị các tính năng tiên tiến. Giao diện kỹ thuật số RS232 hai chiều cho phép người dùng xác định cấu hình các biến cảm biến với Phần mềm DataTemp Multidrop đi kèm với mỗi cảm biến. Chúng bao gồm đầu ra cảnh báo 24VDC được kích hoạt bởi nhiệt độ mục tiêu hoặc nhiệt độ môi trường xung quanh, đèn LED báo tình trạng cảm biến tích hợp cung cấp một chỉ báo trực tuyến về trạng thái hoạt động của cảm biến và hỗ trợ khắc phục sự cố khi thiết lập cảm biến ban đầu
Output | Scaleable 0-5VDC |
Temperature Range | -20 to 500ºC (-4 to 932ºF) |
Temperature Resolution | 0.1°C |
Accuracy | ±1.5% of reading ±2ºC or ±4ºC, whichever is greater |
Repeatability | ±0.5% of reading ±1ºC or ±2ºC, whichever is greater |
Response Time (95%) | 150 mSec |
Spectral Response | 8 to 14 µm |
Optical Resolution | 13: 1 @ 90% energy |
Emissivity | 0.10 to 1.10 (adjustable) |
Transmissivity | 0.10 to 1.00 (adjustable) |
Thread | 18M x 1 metric |
Power Supply | 24 VDC ±20% @ 20mA |
THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |||
RAYTXXTJ3 |
| ThermoJacket housing for TX sensors | |
THERMOJACKET ACCESSORIES | |||
XXXTXXMF |
| Mounting Flange for ThermoJacket | |
XXXTXXMB |
| Adjustable mounting base for ThermoJacket | |
XXXTXXGTQ |
| Blast Gate Assembly with Quartz Window (HT model) | |
XXXTXXGTA |
| Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) | |
XXXTXXAPA |
| Adjustable Pipe Adapter assembly | |
XXXTXXMST |
| Mounting flange for use with sighting tubes | |
XXXTSTC12 |
| 30 cm (12") sighting tube, ceramic (up to 1500°C) | |
XXXTST12 |
| 30 cm (12") sighting tube, stainless steel (up to 800°C) | |
BEESIGHTT |
| 30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base | |
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |||
XXXTXXWR |
| Water flow regulator (water cooling) | |
XXXTXXAR |
| Air purging flow regulator assembly with air filter | |
XXXTXXCAFR |
| Cooling air flow regulator (high capacity) | |
THERMOJACKET & ACCESSORIES | |||
THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |||
RAYTXXTJ3 |
| ThermoJacket housing for TX sensors | |
RAYTXXTJ4 |
| ThermoJacket housing for Marathon MM Sensors | |
RAYTXXTJ5 |
| ThermoJacket housing for XR sensors | |
THERMOJACKET ACCESSORIES | |||
XXXTXXMF |
| Mounting Flange for ThermoJacket | |
XXXTXXMB |
| Adjustable mounting base for ThermoJacket | |
XXXTXXGTQ |
| Blast Gate Assembly with Quartz Window (HT model) | |
XXXTXXGTA |
| Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) | |
XXXTXXAPA |
| Adjustable Pipe Adapter assembly | |
XXXTXXMST |
| Mounting flange for use with sighting tubes | |
XXXTSTC12 |
| 30 cm (12") sighting tube, ceramic (up to 1500°C) | |
XXXTST12 |
| 30 cm (12") sighting tube, stainless steel (up to 800°C) | |
BEESIGHTT |
| 30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base | |
XXX2CFT |
| Focus Adjustment Tool, for use when MR1S sensors are installed in a Thermojacket. | |
BF2TJEXTENDER |
| ThermoJacket Extension flange for CCD camera accessories mounted on MR Sensor in ThermoJacket | |
BD3TJBACK |
| ThermoJacket Rear cover with Peep-sight used for sighting Marathon models without removal | |
XXXGTQHTW |
| Replacement Quartz Window for Blast Gate Assembly | |
JNTHDKIT |
| Conversion Kit to install TX into existing Thermo-Jacket | |
JNTORINGKIT |
| 5 complete O-ring sets for service of ThermoJackets | |
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |||
XXXTXXWR |
| Water flow regulator (water cooling) | |
XXXTXXAR |
| Air purging flow regulator assembly with air filter | |
XXXTXXCAFR |
| Cooling air flow regulator (high capacity) | |
Raynger® 3i Plus | |||
RAYR3IPLUS1ML |
| 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) | |
RAYR3IPLUS1MSCL |
| 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope | |
RAYR3IPLUS2ML |
| 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) | |
RAYR3IPLUS2MSCL |
| 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope, | |
RAYR3IPLUSNBT1ML |
| 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) | |
RAYR3IPLUSNBT1MSCL |
| 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope | |
RAYR3IPLUSNBT2ML |
| 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) | |
RAYR3IPLUSNBT2MSCL |
| 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope, | |
3IPLUS Accessories | |||
XXXR3IPLUSCC |
| Carrying case | |
XXXR3IPLUSSTRAP |
| Neck strap | |
XXXR3IPLUSACCU |
|
| |
XXXR3IPLUSPS |
| Mini USB port adaptor with multi-country power plug | |
|
| (100 – 240 VAC, 50/60 Hz), including SAA, EU, UK, US and CCC | |
XXXR3IPLUSPSCON |
| Mini USB-to-DC jack converter for charging battery separately | |
XXXR3IPLUSUSBCB |
| Computer cable with USB-to-Mini USB, 1.5 m (4.9 ft) | |
Raytek® MP150 Linescanner | |||
RAYTMP150-LT |
| 20 to 350°C (68 to 662°F), 3 to 5 µm | |
RAYTMP150-MT |
| 100 to 800°C (212 to 1472°F), 3.9 microns | |
RAYTMP150-G5 |
| 100 to 950°C (212 to 1742°F), 5 microns | |
RAYTMP150-P30 |
| 30 to 250°C (86 to 482°F), 3.43 microns | |
RAYTMP150-P31 |
| 100 to 350°C (212 to 662°F), 3.43 microns | |
RAYTMP150-1M |
| 600 to 1200°C (1112 to 2192°F), 1 micron | |
RAYTMP150-2M |
| 400 to 950°C (752 to 1742°F), 1.6 micron | |
RAYTMP150-HR |
| 100 to 650°C (212 to 1202°F), 3.5 to 4 micron | |
Comunication Option R |
| RJ-45: Scanner data link is configured to plug into any standard RJ45 Ethernet network socket | |
Data Point Option (0) |
| Standard configuration: 512 data points per scan line (up to 80Hz), 256 data points (80 to 150Hz) | |
Data Point Option (1) |
| Enhanced configuration: 1024 data points per scan line (up to 40Hz), 512 data points per scan line (40 to 80Hz), 256 data points (80 to 150Hz) | |
XXXTMP150CERT |
| Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | |
MP150 INFRARED LINESCANNER ACCESSORIES | |||
XXXHSFIC1 |
| High Speed Fiber-Optic/RJ45 Converter (1 Channel) | |
XXXHSFIC4 |
| High Speed Fiber-Optic/RJ45 Converter (4 Channel) | |
XXXHSFICBOX |
| BOX FOR FIBER OPTIC/RJ45 CONVERTER + PS | |
SVCOSSAPKG |
| On-site Start-up and Commissioning Service (North America Only) | |
XXXTMP50ACMP |
| Mounting Plate for setting on a Trip | |
XXXTMP50ACRMB |
| Adjustable Rugged Mounting Base, includes scanner mounting plate | |
XXXTXXWR |
| Water Flow Regulator | |
XXXTMP50THERM |
| Thermostatic Control System | |
XXXTXXCAFR |
| Air Flow Regulator, high capacity, for purging window | |
XXXTMP50ACFG |
| Laser Enhancing Filter Eyeglasses for laser sighting | |
XXXTMP50SPSCB |
| Spare MP50 power cable, 180°C max. 7.5 meters (25 ft.) long | |
XXXTMP50SPSCB10 |
| Spare MP50 power cable, 180°C max. 10 meters (33 ft.) long | |
XXXTMP150SPETHCB |
| Spare MP150 Ethernet cable, 180°C max. 7.5 meters (25 ft.) long | |
XXXTMP150SPETHCB10 |
| Spare MP150 Ethernet cable, 180°C max. 10 meters (33 ft.) long | |
XXXTMP50S485CB |
| Spare MP50 RS485 Cable with RS232 converter,180°C max. 7.5 meters (25 ft.) long | |
XXXTMP50S485CB10 |
| Spare MP50 RS485 Cable with RS232 converter,180°C max. 10 meters (33 ft.) long. | |
XXXTMP50S4PCN |
| Spare MP50 4-pin connector | |
XXXTMP50S6PCN |
| Spare MP50 6-pin connector | |
XXXTMP50AC485CV |
| Spare RS485 converter for MP50 (no cable) | |
XXXSYS485CV |
| RS232/RS485 Converter (required for Output Modules). | |
XXXSYSPS |
| 24VDC power supply (100/240),1.3 amps | |
XXXUSB485 |
| USB to RS232/422/485 converter | |
XXXTMP150ACSWK1M |
| SPARE WINDOW FOR MP1501M | |
XXXTMP150ACSWK2M |
| SPARE WINDOW FOR MP1502M | |
XXXTMP150ACSWKG5 |
| SPARE WINDOW FOR MP150G5 | |
XXXTMP150ACSWKHR |
| SPARE WINDOW FOR MP150HR | |
XXXTMP150ACSWKLT |
| SPARE WINDOW FOR MP150LT | |
XXXTMP150ACSWKMT |
| SPARE WINDOW FOR MP150MT | |
XXXTMP150ACSWKP3 |
| SPARE WINDOW FOR MP150P3 | |
XXXTMP150FSNPT |
| NPT Fitting Set | |
XXXTMP150FSISO |
| ISO Fitting Set | |
XXXTMP150ACCC |
| Carrying case | |
High Temp Enclosure | |||
XXXSYSENC |
| Enclosure & Base | |
XXXSYSENCICP |
| Internal Cold-Plates | |
SYSENCVT |
| High Performance Vortex Cooler | |
XXXSYSENCWCS |
| Water Cooled Shield | |
XXXSYSENCIS |
| Insulating Shield | |
TF150 Process Imaging System for Thermoforming | |||
RAYTTF150-LT |
| TF150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns | |
RAYTTF150-MT |
| TF150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns | |
RAYTTF150-P30 |
| TF150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | |
RAYTTF150-31 |
| TF150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | |
OPTION FOR TF150 | |||
XXXTMP150CERT |
| Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | |
XXXTMP50ACRMB |
| Adjustable Rugged Mounting Base (includes scanner mounting plate) | |
XXXHSFIC1 |
| High Speed Fiber-Optic/RJ45 Converter (1 Channel) | |
XXXHSFIC2 |
| High Speed Fiber-Optic/RJ45 Converter (4 Channel) | |
XXXHSFICBOX |
| Housing, Fiber optic/RJ-45 converter and power supply | |
SVCOSSAPKG |
| On-site Start-up and Commissioning Service (North America Only) | |
| |||
GS150/GS150LE Process Imaging System for Glass Processing | |||
RAYTGS150G5R1 |
| specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line. | |
RAYTGS150G5R0 |
| specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line. | |
UPGRADES |
|
| |
RAYTGS150LEUPGRADE |
| The GS150LE system was developed specifically to monitor glass which has been coated on one side with a low-emissivity coating. Includes specialized MI3 sensor and GS150LE software, air-purge jacket, PC connection Kit | |
OPTIONS |
|
| |
XXXTMP150CERT |
| Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | |
XXXTMP50ACRMB |
| Adjustable Rugged Mounting Base (includes scanner mounting plate) | |
|
|
| |
|
|
| |
XXXHSFIC1 |
| High Speed Fiber-Optic/RJ45 Converter (1 Channel) | |
XXXHSFIC2 |
| High Speed Fiber-Optic/RJ45 Converter (4 Channel) | |
XXXHSFICBOX |
| Housing, Fiber optic/RJ-45 converter and power supply | |
SVCOSSAPKG |
| On-site Start-up and Commissioning Service (North America Only) | |
ES150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes | |||
RAYTES150-LT |
| ES150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns | |
RAYTES150-MT |
| ES150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns | |
RAYTES150-G5 |
| ES150 System with MP150G5, 100 to 950°C (212 to 1742°F), 5 microns | |
RAYTES150-P30 |
| ES150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | |
RAYTES150-P31 |
| ES150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | |
RAYTES150-1M |
| ES150 System with MP1501M, 600 to 1200°C (1112 to 2192°F), 1 micron | |
RAYTES150-2M |
| ES150 System with MP1502M, 400 to 950°C (752 to 1742°F), 1.6 micron | |
OPTIONS |
|
| |
XXXTMP150CERT |
| Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | |
XXXTMP50ACRMB |
| Adjustable Rugged Mounting Base (includes scanner mounting plate) | |
XXXHSFIC1 |
| High Speed Fiber-Optic/RJ45 Converter (1 Channel) | |
XXXHSFIC2 |
| High Speed Fiber-Optic/RJ45 Converter (4 Channel) | |
XXXHSFICBOX |
| Housing, Fiber optic/RJ-45 converter and power supply | |
SVCOSSAPKG |
| On-site Start-up and Commissioning Service (North America Only) | |
EC150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes | |||
RAYTEC150-P30-R |
| EC150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | |
RAYTEC150-P31-R |
| EC150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | |
OPTIONS |
|
| |
XXXTMP150CERT |
| Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | |
XXXTMP50ACRMB |
| Adjustable Rugged Mounting Base (includes scanner mounting plate) | |
XXXHSFIC1 |
| High Speed Fiber-Optic/RJ45 Converter (1 Channel) | |
XXXHSFIC2 |
| High Speed Fiber-Optic/RJ45 Converter (4 Channel) | |
XXXHSFICBOX |
|
HẾT HẠN
Mã số : | 16792558 |
Địa điểm : | Hồ Chí Minh |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 25/09/2022 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận