Fcb430.Y0.Y0.025R0.D4.A1.A.1.D1.G0.A Lưu Lượng Kế Abb Stc Việt Nam

General Purpose
ATEX / IECEx (Zone 2 / 22)
ATEX / IECEx (Zone 1 / 21)
cFMus version Class 1 Div. 2 (Zone 2 / 21)
cFMus version Class 1 Div. 1 (Zone 1 / 21)

Integral, defined by Transmitter housing
Remote / Aluminium / 1 x M20 x 1.5
Remote / Aluminium / 1 x NPT 1/2 in.
Remote / Stainless Steel / 1 x M20 x 1.5
Remote / Stainless Steel / 1 x NPT 1/2 in.

Flanges DIN PN 40
Flanges DIN PN 63
Flanges DIN PN 100
Flanges EN 1092-1 PN 40, NAMUR length (DN 15: 510 mm, DN 25: 600 mm, DN 50: 715 mm)
Flanges ANSI / ASME B16.5 Class 150
Flanges ANSI / ASME B16.5 Class 300
Flanges ANSI / ASME B16.5 Class 600
Flanges ANSI / ASME B16.5 Class 900 (p-t rating Cl 600)
Flanges ANSI / ASME B16.5 Class 1500 (p-t rating Cl 600)
Flanges JIS 10K
Tri-Clamp acc. DIN 32676
Tri-Clamp acc. ASME BPE
Food industry fittings acc. DIN 11851

Flow forward +/- 0.40 % of flow rate, Gas 1 % of flow rate
Flow forward +/- 0.25 % of flow rate, Gas 1 % of flow rate
Flow forward +/- 0,20 % of flow rate, Gas 1 % of flow rate
Flow forward / reverse +/- 0,40 % of flow rate, Gas 1 % of flow rate
Flow forward / reverse +/- 0,25 % of flow rate, Gas 1 % of flow rate
Flow forward / reverse +/- 0,20 % of flow rate, Gas 1 % of flow rate
Others

Density 10 g/l
Others

Integral / Dual compartment / Aluminium / 3 x M20 x 1.5
Integral / Dual compartment / Aluminium / 3 x NPT 1/2 in.
Integral / Dual compartment / Aluminium / 3 x NPT 1/2 in. (Exd, XP)
Integral / Dual compartment / Aluminium / 3 x M20 x 1.5 (Exd, XP)
Remote / Not specified
Others

Current output 1 (active or passive), digitial output 1 & 2 (passive), HART
Current output 1 (active or passive), digitial output 1 & 2 (passive), 24 V DC transmitter loop power supply, HART
Current output 1 (active or passive), digitial output 1 & 2 (passive), current output 2 (passive), HART
Current output 1 (active or passive), digitial output 1 & 2 (passive), current output 2 (passive), current output 3 (passive), HART
Current output 1 (active or passive), digitial output 1 & 2 (passive), current output 2 (passive), 24 V DC transmitter loop power supply, HART
Without

100 ... 230 V AC
11 ... 30 V DC
Without

-
Test report 2.2 acc. EN 10204 confirmation of material
Material monitoring with inspection certificate 3.1 acc. EN 10204
Material monitoring with inspection certificate 3.2 acc. EN 10204
Material monitoring NACE MR 01-75 with inspection certificate 3.1 acc. EN 10204
Declaration of compliance with the order 2.1 acc. EN 10204
Inspection certificate 3.1 acc. EN 10204 for visual, dimensional and functional test
Inspection certificate 3.1 acc. EN 10204 for positive material identification PMI
Pressure test acc. AD2000
Test package (pressure test, non-destructive test, welder & welding procedure certificate)
Inspection certificate 3.1 acc. EN 10204 for NDE of welds
Certificate of compliance for calibration 2.1 acc. EN 10204
Inspection certificate 3.1 acc. EN 10204 for positive material identification PMI (inlclusive heat analysis)
Others

-
1 x Digital input
1 x Digital output
1 x Analog output passive (4 ... 20 mA)
24 V DC transmitter loop power supply

-
1 x Digital input
1 x Digital output
1 x Analog output passive (4 ... 20 mA)

-
No Display, with Blind Cover
With Push Buttons and Display (TTG) and Glass Cover

-
German
English
French
Spanish
Italian
Portuguese
Chinese

-
German
English
Language package Western Europe / Scandinavia
Language package Eastern Europe
Others

-
VeriMass - Meter verification

-
Maximum burst pressure 6 MPa / 60 bar / 870 psi inclusive tower length extension
Maximum burst pressure 10 MPa / 100 bar / 1450 psi inclusive tower length extension
Maximum burst pressure 15 MPa / 150 bar / 2175 psi inclusive tower length extension

-
Without signal cable
5 m (approx. 15 ft)
10 m (approx. 30 ft)
15 m (approx. 49 ft)
20 m (approx. 66 ft)
25 m (approx. 82 ft)
30 m (approx. 98 ft)
40 m (approx. 131 ft)
50 m (approx. 164 ft)
100 m (approx. 328 ft)
150 m (approx. 492 ft)
200 m (approx. 656 ft)
Others

-
Stainless steel plate with TAG no.
Others

Standard
-40 ... 70 °C (-40 ... 158 °F)

Standard
Tower length extension - meter insulation capability