Additional functions in comparison to basic instrument DTS
Memory for 60.000 readings
USB interface
Tension meter DTX with 5 different memory modes:
Mode S: statistics only
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement (e.g. short time spooling)
Mode C: continuous logging over a user set time and different series of measurement (2 Hz)
Mode F: fast, continuous logging over a user set time and different series of measurement (1000 Hz)
Mode D: storage of single readings and statistic
Mode S: statistics only
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement (e.g. short time spooling)
Mode C: continuous logging over a user set time and different series of measurement (2 Hz)
Mode F: fast, continuous logging over a user set time and different series of measurement (1000 Hz)
Mode D: storage of single readings and statistic
9 Material memory locations for customer made calibrations
Software Tension Inspect 3 for displaying real-time readings on a PC and to store them into a file
Wi-Fi modul for wireless communication with a PC (optional)
Function of basic instrument DTS
Tension meter DTX with large, backlight LCD-display
3 different display modes:
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading
New, unique, force reduced material catching system
Thickness compensation: to reach highest accuracy the diameter of the material to be measured can be set with a wheel and will be displayed in the screen (not available for all models)
Automatic „Zero-Setting“ in each measuring position using a special sensor technique
4 Material memory locations for customer made calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits
High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation
Selectable units of measurement: cN, daN, g, kg, N, lb
Menu set-up in English or German language
Flexible menu set-up to meet operators demand
Some functions can be password protected
Standard Features
Everything in operator’s view:
– the guide rollers
– the measured material
– the readings
– the guide rollers
– the measured material
– the readings
Filament guide and roller shifting mechanism ensure easy acquisition of the running material
Ball-bearing mounted, V-grooved guide rollers
Rubberized handle provides a secure hold in the operators‘ hand
Tension meter DTX with rugged aluminium housing
LiPo Accumulator (approx. 40 hours continuous operation) with AC adapter
CE certified, interference resistant against static electrifications
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
| Calibration: | According SCHMIDT factory procedure |
| Accuracy: | For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit |
| Memory for material curves: | 2 for SCHMIDT calibration plus 9 for customized calibrations |
| Measuring units: | Force (switchable): cN, daN, g, kg, N, lb Thickness (switchable): mm, inch |
| Overrange: | Approx. 10 % FS*, full scale, without accuracy guarantee |
| Overload protection: | 100 % full scale |
| Measuring principle: | Strain gauge bridge |
| Signal processing: | Digital, 16 bit A/D converter |
| Measuring frequency: | Max. 1 kHz (1000 measurings/sec.), intern 8 kHz |
| Measuring roller deflection: | Max. 0.2 mm |
| Display: | Graph LCD |
| 3 different displays: | Numeric, Numeric with graph (time-tension) X-Y-diagram |
| Display update rate: | Approx. 2 times per second |
| Memory: | MIN, MAX, PEAK, AVG and LAST |
| Output signal: | USB |
| Memory: | 60.000 values split up to 255 measuring positions |
| Memory modes: | 5 memory modes with statistical evaluation |
| Damping: | Adjustable electronic damping (averaging) |
| Cal. Adjustment: | ± 10 steps in 1 % increment |
| Thickness compensation: | Max. 2.5 mm (not available for all models) |
| Auto power off: | Approx. 3 minutes of non-use |
| Temperature coefficient: | Gain: less than ± 0.01 % FS* /°C |
| Zero point: | Less than ± 0.03 % FS* /°C |
| Temperature range: | 10 – 45 °C |
| Air humidity: | 85 % RH, max. |
| Power supply: | LiPo accumulator (approx. 40 h continuous use), charging time approx. 3 1/2 h, USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ) |
| Housing material: | Die-cast aluminium |
| Housing dimensions: | See Dimensions |
| Weight, net (gross): | Up to DTX-50K approx. 875 g / 1550 g DTX-60K-V1 approx. 1040 g / 2700 g |
Liên hệ: Mr Hải
Sdt: 0398991575
Gmail: hai@ansgroup.asia
Bình luận