Bộ Ghi Dữ Liệu Ds252 Unipulse, Unipulse-Paperless Data Recorder-Ds252

Product outline

Link tham khảo: http://auto-industryvn.com/unipulse-paperless-data-recorder-ds252-1134221.html

DS252 is a data recorder that can be connected to Unipulse Weighing Indicators and Digital Indicators via SI/F Interface (2-wire type serial interface). Data of indicator can be recorded in CSV format in CF card, which will facilitate data analysis on your PC. In addition, data of various types of equipment can be printed via BCD input or RS-232C interface.

Feature

DS252 is a paperless printer that can be easily connected to unipulse weighing indicators and digital indicators via SI/F* interface.
Record CSV-formatted data in CF card! Easy data analysis on your PC.

Mass recording in CF card

Weight/load data of indicator or DS252 statistical data can be mass-recorded in CF Card.
The data equivalent to amount of data printable on 200 rolls* of rolled paper can be recorded in 64MB CF card.
Even without a CF card, the data equivalent to amount of data printable on 1 roll* or more rolled paper can be recorded in DS252 internal memory.

Data recorded in CSV format

DS252 has been pre-set with a 2-digit number to each of its code type. This function allows the code to be registered in the pre-set code by entering only the pre-set 2-digit number either using the front panel key or via an option. The code can use alphanumeric characters, katakana and/or symbols for up to 6 characters or digits. Up to 100 codes can be classified and tailed in each channel.

High-level statistical calculation functions 

DS252 is pre-loaded with a function that calculates grand total, sub-total, maximum, minimum, average or standard deviation of the recorded data. At the same time, DS252 is able to grasp the extent of data variation using its frequency distribution function.

Simple operation & code-table registration via PC

As setting items are displayed on the LCD panel, setting can be easily done using the front panel key while viewing the display.

DS252 codes can be saved in the CF Card. And reversely, codes saved in the CF Card can be written in DS252 internal memory. As this bothersome code registration process can also be done on a PC, the operation is very convenient indeed.

Optional interfaces

Basically, SI/F interfaces are installed in 2 channels to enable economical double channel recordings. However, as option interfaces, there are RS-232C and BCD input interfaces available. With that, data from various kinds of devices can be recorded.

 

By entering via the front panel key, weight data with code can be recorded in both Ach and Bch. Names of each part code data of Ach can also be entered via an optional interface

Specifications

Card slot
Card specification	CF-Card (Type I or Type II)
Power supply	5V
Available capacity card	Max. 512 MB (FAT16)

 

File specification
File format	CSV format text file
File name	ddhhmmss.csv (dd:day, hh:hour, mm:minute, ss:second)
Create file timing	During grand total (GT) operation or at random timing

 

Data recording method
	･ REC key input ･ Rear panel input (REC terminal) ･ Auto Recording command input (via SI/F, RS-232C) ･ Automatic record by interval setting (1 to 9999 sec.)

 

File writing method
	･ WRITE→ENT key input ･ GT→ENT key input ･ Rear panel input (WRITE terminal) ･ Rear panel input (GT terminal) ･ In case of full internal memory ･ Set by maximum recording count for each codes ･ Setting time

 

Details of recorded data
	Date, Time, Input value, Unit, Status, Code name (6-digits), Count (1 to 9999 counts), Sub-total (9-digits), Grand Total (9-digits), Batch Total, Maximum Value, Minimum Value, Average, Standard Deviation, Range (Max-Min), Frequency Distribution, Error, Over

 

Functions
	Grand total/sub-total recording, batch totaling, code sorting type, deletion recording, OVER recording, interval recording, both recording

 

Setting section
Setting method	Front panel keys

 

Display section
Main display	16-characters x 2-rows, Character height 4.3 mm
Sub display	LED x 3 RECORD (Green): Data recording in-progress WRITE (Green): Writing-in progress into card ERROR (Red): Error display

 

Internal clock
	Accuracy ±1 minute Gain/loss per month (25℃)

 

External signal
	･ Ach: (1)COM, (2)REC, (3)WRITE, (4)ST, (5)GT, (6)SI/F, (7)SI/F ･ Bch: (8)COM, (9)REC, (10)WRITE, (11)ST, (12)GT, (13)SI/F, (14)SI/F

 

Interface (*With regard to options, only one function can be installed.)
SIF	SI/F 2-wire serial interface(Standard) …This is a simple output serial interface for connection of a UNIPULSE-manufactured printer, external display, etc..
BCI	BCD parallel data input interface (option) …Parallel interface to receive setting values from external devices.
232	RS-232C communication interface (option) …Weight data, various kinds of status, and various setting values can be written, changed, and read by commands from the host computer side.

 

General performance
Power source	DC24V±15%
Power consumption	Max. 150mA
Inrush current	10A (800μsec(Typ.))
Operation condition	Temperature: Operation temperature range: 0℃ to +40℃; Storage temperature range: -20℃ to +70℃ Humidity: 85% RH or less (non-condensing)
Dimensions	96(W)×96(H)×110(D) mm
Weight	Approx. 0.8kg

 

Attachments
Mini driver	1
BCD input connector	1 (with BCD option)
Operation manual	1

Option 

Model
232	RS-232C communication interface
BCI	BCD parallel data input interface

 

Liên hệ: Mr Hải

Sdt: 0398991575

Gmail: hai@ansgroup.asia