| Specifications of SWT (Fe probes) |
| Models | Fe－2.5※1/2.5L | Fe-2.5LwA | Fe-0.6Pen | | Methods | Magnetic inducing type | | Ranges | 0～2.50mm | 0～600μm | | Display resolutions | 1μm：0～999μm
switching to
0.1μm：0～400μm
0.5μm：400～500μm
0.01mm：1.00～2.50mm | 1μm：0～600μm
switching to
0.1μm：0～400μm
0.5μm：401～500μm | Accuracies
(perpendicularly
testing on
flat face) | 0～100μm：±1μm
or ±2% the reading value
101μm～2.50mm：±2%
0～100μｍ：±１μｍ or ±2％ the reading value
101μm～600μm:
±2% the reading value | | Probes | One point contact constant pressure type,
V cut
2.5：φ15×47mm
2.5L：18x23x67mm | One point contact constant pressure type,
Measuring part：About 20x57mm
Total Length： about 550～1,540mm (flexible) | One point contact constant pressure type, V cut
φ5.6x92.2mm | V type probe adaptors※2
/Non | Non | | Accessories | Standard thickness,
Zero plate for testing (Fe) | Standard thickness,
Zero plate for testing (Fe)
Carrying case | Standard thickness,
Zero plate for testing (Fe) | | Measuring objects | Coating, lining, thermal spray films, plating (except electrolyte nickel plating) etc. on magnetic metal substrate like iron, steel. | Coating, lining, plating on high/hard-to-reach/remote place on magnetic metal substrate like iron, steel. | Coating, lining, plating on a narrow/small place and part substrate like iron, steel. |
|
 |
※1．Probes are heat-resistant （about 200℃）. （Ｆｅ-2..5）
※2．V type probe adaptors (３ kinds: lessΦ5, Φ5～10, Φ10～20） can be used with Fe-2.5. |
|
| Models | Fe-10 | Fe-20 | | Methods | Magnetic inducing type | | Ranges | 0～10mm | 0～20mm | | Display resolutions | 1μm：0～999μm
0.01mm：1～10mm | 1μm：0～999μm
0.01mm：1～5mm
0.1mm：5～20mm | Accuracies
(perpendicularly
testing on flat
face) | 0～3mm：±(5μm + 3％ the read value)
Over or 3.01mm：±3％ the read value | | Probes | One point contact constant pressure type, V cut
φ18x47mm | One point contact constant pressure type, V cut
φ35x55mm | | Accessories | Standard thickness,
Zero plate for testing （Fe） | | Measuring objects | Relatively thicker objects | Thick objects |
|
|
| Probe must be ordered separately. |
|
| Specifications of SWT (NFe probes) |
| Models | NFe-2.0※１/2.0L | | Methods | Eddy current type | | Ranges | 0～2.00mm | Display
resolutions | 1μm：0～999μm
switching to
0.1μm：0～400μm
0.5μm：400～500μm
0.01mm：1.00～2.00mm | Accuracies
(perpendicularly
on flat face) | 0～100μm：±1μm
or ±2% the read value
101μm～2.00mm：±2% | | Probes | One point contact constant pressure type, V cut
2.0：φ15×47mm
2.0L：18x22x57mm | | V type probe adaptor※2/Non | | Accessories | Standard thickness, Zero plate for testing (NFe) | Measuring
objects | Insulated films on non-Magnetic metal substrates like aluminum, cupper | | Relatively general use objects |
|
|
Probe must be ordered separately.
※1．Probes are heat-resistant （about 200℃）. （ＮＦｅ-2.0）
※2．V type probe adaptors (３ kinds：lessΦ5, Φ5～10, Φ10～20） can be used with NFe-2.0. |
|
| Models | NFe-0.6 | NFe-5 | NFe-8 | | Methods | Eddy current type | | Ranges | 0～600μm | 0～5mm | 0～8mm | Display
resolutions | 1μm：0～600μm
switching to
0.1μm：0～400μm
0.5μm：400～500μm | 1μm：0～999μm
0.01mm： 1～5mm | 1μm：0～999μm
0.01mm：1～8mm | Accuracies
(perpendicularly
on flat face) | 0～100μm：±1μm
or ±2% the read value
101μm～600μm：±2% | 0～3mm：±(5μｍ + ±3％ the read value)
Over or 3.01mm：±3％ the read value | 0～3mm：±(5μｍ + ±3％ the read value)
Over or 3.01mm：±3％ the read value | | Probes | One point contact constant pressure type,
φ13×45.5mm | One point contact constant pressure type, V cut
φ20.4×47.1mm | One point contact constant pressure type, V cut
φ35×59mm | | Non | | Accessories | Standard thickness, Zero plate for testing (NFe) | Measuring
objects | Insulated films on non-Magnetic metal substrates like aluminum, cupper | | like aluminum, cupper for high stability for narrow bar , tube, minute pieces | Relatively thick objects | Relatively thick objects |
|
Bình luận