Công Tắc Mức Code: Lv10-5301, Flowline Vietnam, Anh Nghi Sơn

APPLICATION

The general purpose float liquid level switch provides high or low liquid level detection of relatively clean water and chemical solutions with a 15VA reed switch output. Media examples include potable water and boric acid. The baffle body eliminates level switch chatter caused by turbulence. The submersible PP or PVDF level switch sensor is mounted vertically inside the tank, and connected to a PLC or relay controller.

FEATURES

• Baffle body and stabilized float dampen out switch chatter
• Submersible PP or PVDF sensor and cable for corrosive liquids
• 15VA dry contact selectable NO or NC state via wiring selection
• Compatible with Smart Trak and Switch-Pak installation fittings
• 
  
  
  

  
  

  
  

  SPECIFICATIONS

   

  
  

  
  

  
  
  
  
  
  

  
  

  
  

  Orientation: ± 20º vertical

  Accuracy: ± 2mm in water

  Repeatibility: ± 1mm in water

  Specific gravity: 0.8 minimum

  Contact type: (1) SPDT reed

  Contact rating: 15 VA, 0.25A maximum

  Contact output: Selectable NO / NC

  Process temp.: F: -40° to 176°, C: -40° to 80°

  Pressure:: 25 psi (2 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C

  Sensor rating: NEMA 6 (IP68)

  Sensor material: -13X1: PP, -53X1: PVDF

  Cable jack. mat.: -13X1: PP, -53X1: FEP

  Cable type: 3-conductor, shielded

  Cable length: 10’ (3m)

  Process mount: 3/4” NPT (3/4” Rp)

  Classification: General purpose

  Compliance: CE