Cc-Link Mitsubishi Aj65Sbtb2N-8R

CC-Link Mitsubishi AJ65SBTB2N-8R

Thông số kỹ thuật AJ65SBTB2N-16R

• Số ngõ ra: 16
• Dạng ngõ ra: Relay
• Rated load voltage/current: 2A/point, 8A/common at 24VDC (resistive load) or 240VAC (cos=1)
  
  
  
  • Min. switching load 5VDC, 1mA
  • Max. switching voltage 264VAC, 125VDC
• Thời gian phản hồi: OFFON 10ms or less, ONOFF 12ms or less
• Độ bền: Mechanical 20 million times or more
• Electrical:
  
  
  
  • Rated switching voltage/current load: 100 thousand times or more
  • 200VAC 1.5A, 240VAC 1A (cos=0.7): 100 thousand times or more
  • 200VAC 1A, 240VAC 0.5A (cos=0.35): 100 thousand times or more
  • 24VDC 1A, 100VDC 0.1A (L/R=7ms): 100 thousand times or more
  • Max. switching frequency 3600 times/hour
• Wiring method for common 16 points/common (2-wire, terminal block type)
• Number of occupied stations 32-point assignment/station (16 points used)
• Module power supply
• Voltage 20.4 to 26.4VDC (ripple ratio: within 5%)
• Current 120mA or lower (at 24VDC and all points ON)
• Noise immunity
• Noise voltage: 1500Vp-p (AC type), 500Vp-p (DC type), noise width 1µs,
• noise frequency 25 to 60Hz (noise simulator condition)
• Fast transient/burst immunity test
• IEC 61000-4-4:1kV
• Withstand voltage
• 2830VACrms for 3 cycles between all AC external terminals and ground (2000m
• above sea level)
• 500VAC for 1 minute between all DC external terminals and ground
• Insulation resistance
• 10M or higher between all AC external terminals and ground (500VDC insulation
• resistance tester)
• 10M or higher between all DC external terminals and ground (500VDC insulation
• resistance tester)
• Weight 0.35kg
• External
• connection
• system
• Communication part,
• module power supply part
  
  
  
  • 7-point two-piece terminal block
  • [Transmission circuit, module power supply, FG]
• M3×5.2 screw (tightening torque range: 0.59 to 0.88N•m)
• Applicable solderless terminal: 2 or less
• I/O power supply part,
• I/O part
• 34-point direct-mount terminal block
• [I/O power supply, I/O signal]
• M3×5.2 screw (tightening torque range: 0.59 to 0.88N•m)
• Applicable solderless terminal: 2 or less
• Module mounting screw
• M4 screw with plain washer finished round
• (tightening torque range: 0.78 to 1.08N•m)
• Mountable with a DIN rail in 6 orientations
• Applicable DIN rail TH35-7.5Fe, TH35-7.5Al (compliant with IEC 60715)
• Applicable solderless terminal
•  RAV1.25-3 (compliant with JIS C 2805)
• [Applicable wire size: 0.3 to 1.25mm2 (22 to 16 AWG) stranded wire]
•  V2-MS3, RAP2-3SL, TGV2-3N
• [Applicable wire size: 1.25 to 2.0mm2 (16 to 14 AWG) stranded wire]
• Wire Material Copper
• Temperature rating 75°C or more
• Accessory User’s manual
   

Qúy khách có nhu cầu, vui lòng liên hệ:

• Mỹ Hạnh: 0931 222 127
• hoanganhphuong002@gmail.com