Liên hệ
Kdc D3 Miếu Nổi, P.3, Q.bình Thanh, Tp. Hcm
ioLogik E1214 Moxa Viet Nam, ioLogik E1214 Ethernet remote I/O, I/O E1214, Moxa Đại Lý Việt Nam.
Moxa Đại Lý Việt Nam. Nhà cung cấp Anh Nghi Sơn - ANS Viet Nam.
Cung cấp tất cả máy móc, thiết bị của Moxa Đại Lý Việt Nam.
ioLogik E1240 models: 8
ioLogik E1242 models: 4
ioLogik E1241 models: 4
ioLogik E1212 models: 8
ioLogik E1213/E1242 models: 4
ioLogik E1210 models: 16
ioLogik E1212/E1213 models: 8
ioLogik E1214 models: 6
ioLogik E1242 models: 4
ioLogik E1211 models: 16
ioLogik E1213 models: 4
3k VDC or 2k Vrms
ioLogik E1214 models: 6
ioLogik E1260 models: 6
ioLogik E1262 models: 8
Reset button
Screw-fastened Euroblock terminal
250 Hz
Software configurable
On: short to GND
Off: open
DI or event counter
ioLogik E1210/E1212 models: 8 channels
ioLogik E1213 models: 12 channels
ioLogik E1214 models: 6 channels
ioLogik E1242 models: 4 channels
Dry contact
Wet Contact (NPN or PNP)
On: 10 to 30 VDC
Off: 0 to 3 VDC
Screw-fastened Euroblock terminal
ioLogik E1211/E1212/E1242 models: 200 mA per channel
ioLogik E1213 models: 500 mA per channel
DO or pulse output
ioLogik E1211/E1212/E1242 models: Sink
ioLogik E1213 models: Source
ioLogik E1211/E1212/E1242 models: 2.6 A per channel @ 25°C
ioLogik E1213 models: 1.5 A per channel @ 25°C
175°C (typical), 150°C (min.)
35 VDC
500 Hz (max.)
500 VAC
Screw-fastened Euroblock terminal
Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC
100 milli-ohms (max.)
100,000 operations @ 5 A resistive load
1,000 mega-ohms (min.) @ 500 VDC
5,000,000 operations
0.3 Hz at rated load (max.)
Form A (N.O.) power relay
Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.
ioLogik E1240/E1242:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E1240-T/E1242-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
120 ohms
Screw-fastened Euroblock terminal
Voltage/Current
Differential
10 mega-ohms (min.)
0 to 10 VDC
0 to 20 mA
4 to 20 mA
4 to 20 mA (with burn-out detection)
16 bits
All channels: 12 samples/sec
Per channel: 1.5 samples/sec
ioLogik E1241:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E1241-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -40 to 75°C
Screw-fastened Euroblock terminal
10 mA
400 ohms
Note: 24 V of external power required when loading exceeds 1000 ohms
0 to 10 VDC
4 to 20 mA
12-bit
ioLogik E1260:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E1260-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -40 to 75°C
Screw-fastened Euroblock terminal
2- or 3-wire
625 kilo-ohms (min.)
PT1000 (-200 to 350°C)
PT50, PT100, PT200, PT500 (-200 to 850°C)
310, 620, 1250, and 2200 ohms
0.1°C or 0.1 ohms
All channels: 12 samples/sec
Per channel: 2 samples/sec
ioLogik E1262:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E1262-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -40 to 75°C
Screw-fastened Euroblock terminal
Types J, T, E, S, B: ±5°C
Types K, R, N: ±8°C
±0.5°C @ 25°C
±1.5°C @ -40 to 75°C
10 mega-ohms (min.)
±19.532 mV
±39.062 mV
±78.126 mV
Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power on)
16 bits
All channels: 12 samples/sec
Per channel: 1.5 samples/sec
J, K, T, E, R, S, B, N
2, 1 MAC address (Ethernet bypass)
1.5 kV (built-in)
Web Console (HTTP)
Windows Utility (ioSearch)
EtherNet/IP Adapter (Slave)
Modbus TCP Server (Slave)
Moxa AOPC (Active Tag)
MXIO Library
BOOTP
RESTful API
DHCP Client
HTTP
IPv4
TCP/IP
UDP
SNMPv1 Trap
SNMPv1/v2c
Device Settings MIB
Access control list
Power, Ready, Port 1, Port 2
1, 2, 3, 4, 5, 6, 15, 16, 23
Server
10
Adapter
9 (for read-only), 1 (for read/write)
Screw-fastened Euroblock terminal
1
12 to 36 VDC
ioLogik E1210 Series: 110 mA @ 24 VDC
ioLogik E1211 Series: 200 mA @ 24 VDC
ioLogik E1212 Series: 155 mA @ 24 VDC
ioLogik E1213 Series: 130 mA @ 24 VDC
ioLogik E1214 Series: 188 mA @ 24 VDC
ioLogik E1240 Series: 121 mA @ 24 VDC
ioLogik E1241 Series: 194 mA @ 24 VDC
ioLogik E1242 Series: 139 mA @ 24 VDC
ioLogik E1260 Series: 110 mA @ 24 VDC
ioLogik E1262 Series: 118 mA @ 24 VDC
Plastic
27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
200 g (0.44 lb)
DIN-rail mounting
Wall mounting
I/O cable, 16 to 26 AWG
Power cable, 12 to 24 AWG
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
EN 55032/24
EN 61000-6-2/-6-4
CISPR 32, FCC Part 15B Class A
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
ATEX, Class I Division 2 ATEX and Class I Division 2 currently do not apply to the ioLogik E1213/E1213-T models.
UL 508
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
RoHS, CRoHS, WEEE
ioLogik E1210 Series: 671,345 hrs
ioLogik E1211 Series: 923,027 hrs
ioLogik E1212 Series: 561,930 hrs
ioLogik E1213 Series: 715,256 hrs
ioLogik E1214 Series: 808,744 hrs
ioLogik E1240 Series: 474,053 hrs
ioLogik E1241 Series: 888,656 hrs
ioLogik E1242 Series: 502,210 hrs
ioLogik E1260 Series: 660,260 hrs
ioLogik E1262 Series: 631,418 hrs
Telcordia SR332
Universal I/O, 6 DIs, 6 relays, -10 to 60°C operating temperature | ioLogik E1214 |
Ethernet remote I/O with 2-port Ethernet switch, 8 DIs, 8 DIOs | ioLogik E1212 |
Ethernet remote I/O with 2-port Ethernet switch, 4 Aos | ioLogik E1241 |
Universal I/O, 4 AIs, 4 DIs, 4 DIOs, -10 to 60°C operating temperature | ioLogik E1242 |
Universal controller, 8 DIs, 8 DOs, 4 DIOs, Click&Go, -10 to 60°C operating temperature | ioLogik E2212 |
Liên hệ: Nguyễn Chí Hải
Sdt: 0398991575
Gmail: hai@ansgroup.asia
HẾT HẠN
Mã số : | 15574996 |
Địa điểm : | Toàn quốc |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 30/04/2019 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận