GENERAL SPECIFICATIONS |
| | |
Input |
Rated Voltage (UL warranty voltage) | AC 100 ~ 240 V |
Input voltage range | AC85~264V(-15%, +10%) |
Inrush current | | 50A Peak or less |
Input current | | 0.5A or less (220V), 1A or less (110V) |
Efficiency | | 0.65 |
Permitted momentary power failure | 10ms or less |
Dimensions in (LxHxD) | | 3.9x3.5x2.5 |
Output |
Rated output | DC5V | 220mA |
DC24V | 0.2A |
Output voltage ripple | DC5V (±2%) |
Cable specification | 0.75 ~ 2 mm2 |
| | |
I/O SPECIFICATIONS |
| | |
Input |
Input point | 8 point, 1 COM |
Isolation method | Photo-coupler isolation |
Rated input voltage | DC24V |
Rated input current | 4mA (point 0-3: 7mA) |
Operation voltage range | DC20.4~28.8V (within ripple rate 5%) |
On voltage / On current | DC19V or higher / 3mA or higher |
Off voltage / Off current | DC6V or lower / 1mA or lower |
Input resistance | 5.6kΩ (P00~P03: 2.7kΩ) |
Response time | Off → On | 1/3/5/10/20/70/100ms (set by I/O parameter) default: 3ms |
On → Off | 1/3/5/10/20/70/100ms (set by I/O parameter) default: 3ms |
Insulation Voltage/Resistance | AC560Vrms / 3 cycle (altitude 2000m); 10MΩ or higher |
Output |
Output point | 6 point |
Isolation method | Relay isolation |
Rated load voltage/current | DC24V 2A (resistive load) / AC220V 2A (COSΦ=1), 5A/COM, 3 COM (Isolated) |
Min. load voltage/current | DC5V / 1mA |
Max. load voltage | AC250V, DC125V |
Off leakage current | 0.1mA (AC220V, 60Hz) |
Max. On/Off frequency | 3,600 times / hour |
Surge absorber | None |
Service Life | Mechanical | 20 million times or more |
Electrical | Rated load voltage / Current 100,000 times or more |
AC200V / 1.5A, AC240V / 1A (COSΦ=0.7) 100,000+ times |
AC200V / 1A, AC240V / 0.5A (COSΦ=0.35) 100,000+ times |
DC24V / 1A, DC100V / 0.1A (L / R=7㎳) 100,000+ times |
Response time | Off → On | 10ms or less |
On → Off | 12ms or less |
Bình luận