Động Cơ Dc/Ac Oriental Vietnam
Liên hệ
Chung Cư Miếu Nổi, Chung Cư Miếu Nổi, 3, Bình Thạnh, Hồ Chí Minh, Việt Nam
Thông số :
Công Suất : 90W
Hộp số : tùy chọn
Trục quay : 18mm
momen : 30Nm
Tốc độ: 300 - 1600 v/p
Stepper Motor (Motor Only) - 0.36°, 0.72°, 0.9°, 1.8° and Geared
Oriental Motor offers stepper motors in four basic step angles and a wide range of frame sizes from 0.79 in. (20 mm) up to 3.54 in. (90 mm). Five geared type stepper motor solutions, encoder options and various motor windings are offered.
Stepper Motor Drivers
- 2-Phase Bipolar Drivers
- High Performance, Low Vibration Microstepping Drivers
- Board-type, Mounting Plate-type or Box-type
- 20 ~ 75 VDC, 0.13 A ~ 4.5 A
- 0.79 ~ 3.54 in. (20 ~ 90 mm) frame sizes
- Non-backlash, low-backlash and spur gears available
- Bipolar, unipolar or New Pentagon windings
- Available with Electromagnetic Brake
$38.25
AC Input
Stepper Motor and Driver Systems
- Highest torque through entire speed range
- Open or closed loop
- Low heat / constant duty options
- Single-phase 100-115, 200-230 VAC or three-phase 200-230 VAC power supply input
- Pulse input or built-in controller
DC Input
Stepper Motor and Driver Systems
- Open frame or case type
drive - Open or closed loop
- Low heat / constant duty options
- 12 to 75 VDC
power supply input - Pulse input or built-in controller
Tuning-Free Servo Motor and Driver Package - NX Series
A high performance servo motor, driver, gearhead (pre-assembled) with cables in one easy to order package.
- 50 W (1/15 HP) ~ 750 W (1 HP) servo motors
- Maximum Speed = 5,500 r/min
- Round Shaft or Planetary Geared type
- Electromagnetic brake options
- Single-Phase 100-115, 200-230 and three-phase 200-230 VAC
- Controller required
Servo Packages
Short-Range Servo Motor and Driver Package - AR Series
Featuring our unique AlphaStep closed loop technology to maintain positioning operation even during abrupt load fluctuations and accelerations with constant-duty, short-range servo motors. Frame sizes from 1.65 in. (42 mm) up to 3.54 (90 mm), geared and electromagnetic brake types available.
Built-in Controller (Stored Data) Type
- Maximum Speed = 4,000 r/min
- RS-485 communications
- Up to 31 units daisy chained
- Single-Phase 100-115 or 200-230 VAC
Pulse Input Type
- Maximum Speed = 4,000 r/min
- Single-phase 100-115, 200-230 VAC or three-phase 200-230 VAC
- Controller required
Short-Range Servo Motor with Mechanical Absolute Encoder - AZ Series
The AZ Series offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back-up or external sensors to buy. Advanced operation and function control is also included through our MEXE02 software (free download). The AZ Series can perform quick positioning operations over a short distance while providing smooth performance.
Built-in Controller (Stored Data) Type
- PLC or PC based control
- Up to 31 units daisy chained
- Single-Phase 100-120 or Single-Phase/Three-Phase 200-240 VAC
Pulse Input Type Driver
- Single-Phase 100-120 or Single-Phase/Three-Phase 200-240 VAC
- Controller required
Speed Control Servo Motor and Driver Package - BXII Series
High-performance brushless servo motor and driver packages with electromagnetic brake and gearing options with up to 970 lb-in of torque.
- Speed control range: 2 ~ 4000 r/min
- 16 speed/position settings
- Speed, positioning and torque limiting control
- Single-phase 100-120 VAC or single-phase, three-phase 200-240 VAC
Constant Speed AC Motors & Gear Motors
AC motors & gear motors operate by simply connecting a capacitor and supplying AC power from a commercial power supply. Oriental Motor offers a wide range of AC motor types to meet specific application requirements.
Available from 1/125 HP (6 W) up to 3 HP in Single-Phase and Three-Phase VAC.
- NEW! AC Induction Motors & Gear Motors
- AC Reversible Motors & Gear Motors
- Electromagnetic Brake AC Motors & Gear Motors
- IP67 Rated Washdown AC Gear Motors
- AC Torque Motors & Gear Motors
- Clutch & Brake AC Motors
- Low-Speed Synchronous AC Motors
- NEW! NEMA 56C Gear Reducers
Speed Control AC Motor & Gear Motor
- Motor & Controller Packages for Guaranteed Performance
- Three-Phase Motor only for use with Third-Party Inverters
Positioning with an AC Gear Motor
- Use brake options to provide positioning when used with an AC motor
- 6 W to 90 W
AC Input BMU Series Brushless DC Motors and Drivers
30 W (1/25 HP) up to 400 W (1/2 HP)
Easy to use brushless DC motor and driver package with simple wiring and operation. Up to 610 lb-in of torque.
BMU Series Brushless DC Motor Speed Control
- Speed control range: 80 ~ 4000 r/min
- Imperial (in.) or Metric (mm) geared motors
- IP65 rated motors available
- Digital display, panel mount driver
- Single-phase 100-120, 200-240 VAC or three-phase 200-240 VAC
DC Input BLH Series Brushless DC Motors and Drivers
15 W (1/50 HP) & 100 W (1/8 HP)
Compact board-type driver with brushless DC motor. Up to 600 lb-in of torque
BLH Series Brushless DC Motor Speed Control
- Speed Control Range: 100 ~ 3000 r/min
- 2 Speed Settings
- IP65 rated
- Compact Board Type Driver
- 24 VDC
AC Input BLE Series Brushless DC Motor Speed Control Systems - 30 W (1/25 HP) up to 120 W (1/6 HP)
Standard brushless DC motor and driver package with gearhead producing up to 600 lb-in of torque. Electromagnetic brake option available.
- Speed control range: 100 ~ 4000 r/min
- 2 ~ 81 speed settings
- Speed and torque limiting1 control
- IP65 rated
1Optional controller module or Data Setting Software
NEW! BLE Series Brushless DC Motor Speed Control with Built-in Controller (Stored Data) Type
- PLC or PC based control
- Up to 31 units daisy chained
- Single-phase 100-120 or 200-240 VAC
BLE Series Brushless DC Motor Speed Control (Standard Type)
- Single-phase 100-120, 200-240 VAC or three-phase 200-240 VAC
$357.85
AC Input BXII Series Brushless DC Motor Speed Control Systems - 30 W (1/25 HP) up to 400 W (1/2 HP)
HẾT HẠN
| Mã số : | 13544852 |
| Địa điểm : | Hồ Chí Minh |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 06/04/2018 |
| Loại tin : | Thường |
Gợi ý cho bạn
Bình luận