Máy Kiểm Tra Lực Nén Chai, Lực Vặn Nắp Chai... - Canneed Vietnam

Applications: Food-industry / Cosmetic/ Pharmaceutical / Chemical / Metrology

SPECIFICATIONS: 
1) Utilization by Electroluminescent tactile screen
2) Programming by pull-down menu
3) Measures in screwing and unscrewing.( opening and closing )
4) Units available : Kgf.cm / Inch.lbs / daN.cm / N.cm / N.m
5) Measuring range  A : from 00.00 to 99.99Kgf.cm / 9.999 N.m
6) and  0.050 to 3.999 Kgf.cm (in " accuracy " mode ) 
7) and 0.001 to 2.999 on request
......

Canneed “PEBT-4000 PET Bottle Pressure Tester (Burst Tester)” is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three (3) international commonly used testing methods, users can select the testing mode according to their requirement. PEBT-4000 is able to test the pressure capabilities that under a preset pressure or the burst test. 

By the means of water replenishing pressurization, the pressurizing process was linearized, and to increase until reaching the preset point or burst point.

Users can select the testing mode through the touch-screen. Fill the sample, close the protection door, then press start. When the testing starts, the PEBT-4000 will clamp the sample and run accord with the settings automatically. The touch-screen will display the real-time pressure value and record down the max. pressure (passing test) and burst pressure (destructive test).

The Canneed “MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge” is a refined portable bottle thickness gauge. It can measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.

The Canneed "PPG-100, PPG-200 Preform Perpendicularity Gauge" is used to test the perpendicularity of PET bottle.It is the standard equipment for PET bottle industry and beverage industry.
Unlike other instruments, PPG-100 and PPG-200 can effectively avoid the measuring errors made by the clamp. Equipped with calibration column, it can ensure absolute accuracy.

TLT-200 Top Load Tester for PET Bottle is used for top load strength, top load deformation test as well as bottle flat and lateral pressure test. The testing results provide important evidence for quality controlling and improving. It is easy and convenient to operate and maintain TLT-100.

The CanNeed “STT-CAL Torque Tester Calibration Tool” is use for calibrating the torque testers. 

Adopted the precision weight, can achieve the accurate torque value.

The “PETG-100d PET Bottle Embryo Thickness Gauge (Digital)” is used to measure the embryo thickness of PET Bottle.

Easy-handling design and invariablenes measure pressure let operators get the accurate measure result easily.

The “AS-100 AutoShaker Beverage CO2 Calculator” is a patented instrument which is for calculating the carbon dioxide content in the filled beverage in glass/PET bottles and cans. The simple operation which guarantees high reproducibility has led to its becoming a significant element of Quality Assurance in the drinks industry.

Attributes:
- Rotate by motor, avoid shaking by hand, guarantees high reproducibility 
- With protection drum, more safety 
- Measurement just need 3 minutes
- Simple operation
- Applicable to most common glass bottle PET bottle and cans.

The “CAN-7001 CO2 tester and Pressure Tester “is used to measure the CO2 content in carbonated beverages filled in glass and PET bottles and cans.

Once the bottle or can is placed in the tester, the handle is pulled forward and the sample is pierced consecutively.

The pressure is read on the pressure gauge, as soon as the equilibrium pressure is achieved.

With a dial thermometer install with model CAN-7001-T, the temperature of the liquid is read at the same time.

The “CAN-5001 & CAN-5001-T CO2 tester and Pressure Tester “is for measuring the CO2 content in carbonated beverages filled in glass and PET bottles or cans. It is applicable to the bottles or cans with different sizes. The pressure is read on the pressure gauge as soon as the equilibrium pressure is achieved.