Cảm Biến Nhiệt Độ Electro-Sensors - Electro-Sensors Vietnam

Temperature Sensor Features

Electro-Sensors TT420 and TT420-LT (Liquid-Tight) 4-20 mA temperature sensors can be used to monitor temperature on a wide range of industrial machinery including conveyors, bucket elevators, motors, gearboxes, pumps, turbines, fans, curing ovens, centrifuges, agitators and hammer mills.

RTDZ, RTDZ-LT, RTDS and RTDS-LT are resistance-output Pt100 RTD temperature sensors with 3-wire cable (specify length) The measurement probe and fitting options are optimized for many industrial applications.

RTD / RTD-LT

RTDZ, RTDZ-LT, RTDS and RTDS-LT are resistance-output Pt100 RTD temperature sensors with 3-wire cable

RTD / RTD-LT

RTD temperature sensors with RTD Output, with and without Liquid-Tight Conduit Fittings

 •  3-wire Platinum Pt100 RTD output
 •  Attachment probe, sensor and cable
 •  Compatible with PLCs, meters, data acquisition, 
    and hazard monitoring system with 3-wire 
    Pt100 RTD- inputs
 •  Integral 1/2 in. flexible liquid-tight conduit 
    fittings (RTDZ/S-LT models) 
 •  Intrinsically Safe (IS) Class I, Div I (A, B, C, D), 
    Class II, Div I (E, F, G) I.S. Simple Apparatus

Models:

RTDZ - 1/4 in. stainless steel probe

RTDS - 3/8-16 threaded stud probe

RTDZ-LT - RTDZ with a 1/8 NPT adapter and 1/2 in. flexible liquid-tight conduit fitting (e.g. grease fitting for bearing temperature)

RTDS-LT - RTDS with a 1/2 in. flexible liquid-tight conduit fitting (e.g. belt alignment rub block temperature)

TT420

TT420 models are UL Listed, Intrinsically Safe (IS) and come in 3 probe/mounting options for a variety of industrial temperature measurement applications.

Temperature Sensors with 4-20 mA Output

Features  
  • 2-wire, loop-powered 4-20 mA analog output
  • Attachment probe, sensor, and 2-wire 
    4-20 mA signal conditioner in one
  • No user calibration: works right out of the box
  • Compatible with PLCs, meters, and data acquisition systems
  • Reverse-wiring protected
  • UL listed, Intrinsically Safe (IS) Class I, Div I (C, D) and Class II, Div I (E, F, G)

TT420 temperature sensors are used to monitor temperature on a wide range of industrial machinery including liquid  tanks, piping, conveyors, bucket elevators, motors, gearboxes, pumps, turbines, fans, curing ovens, centrifuges, agitators, hammermills, and more.

3 Models

• 
  TT420F -  flat surface mount-  mounts onto any flat surface with a #10 machine screw (included)
• 
  TT420S -  1/4-28 threaded stud- screws into any 1/4-28  tap
• 
  TT420Z* -  1/4 in stainless steel probe -  often used with compression fitting mount (tanks, piping, bearing zerk grease fittings)

* Available with or without compression fitting adapters

TT420-LT

TT420-LT models are FM approved Dust Ignition-proof and come in 3 probe/mounting options. All models have integral liquid-tight conduit fittings and are optimized for Class II hazard monitoring.

Temperature Sensors with 4-20 mA Output and Liquid-Tight Conduit Fittings

Features 
  • 2-wire, loop-powered 4-20 mA analog output
   • Attachment probe, sensor, 2-wire 4-20 mA signal conditioner 
     and conduit fitting in one
  • No user calibration: works right out of the box
  • Compatible with PLCs, meters, data acquisition, and hazard monitoring systems
  • Reverse-wiring protected
  • Integral 1/2 in flexible liquid-tight conduit fittings
  • Optimized for Class II area hazard monitor systems (e.g. grain, coal dust)
  • FM approved, Dust Ignition-proof. Class II and III, Div I (E, F, G); NEMA 4

TT420-LT probes and fittings are optimized for shaft bearing (TT420Z-LT), belt rub-block (TT420S-LT) and other temperature measurement applications. All models have integral liquid/dust-tight conduit fittings allowing complete sensor and cable segregation and protection.

2 model families

• 
  TT420S-LT* -  3/8 - 16 threaded stud probe (e.g. belt-alignment rub block temperature)
• 
  TT420Z-LT* -  1/4  in stainless steel probe with 1/8 NPT adapter (e.g. zerk grease fitting for bearing temperature)

* Probe and cable length, straight and right-angle options are available. A lug-mount adapter is available for TT420S-LT.

Optional Magnet Mount Adapter for TT420S-LT

   • Accepts 3/8-16 UNC sensor thread (TT420S-LT only)
   • Used when permanent mounting is not practical or not possible
   • Solid brass for rapid temperature conduction