Liên hệ
D5 Kdc Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh, Tphcm
Fimet Vietnam - Pitesco Vietnam đại lý phân phối thiết bị hãng Fimet tại Vietnam.
Động cơ Fimet, Motor Fimet, Động cơ DC Fimet, DC Motor Fimet, Fimet Vietnam
Liên hệ cho chúng tôi theo số 0918 18 0578 - 0912 979 551 - để CÓ thông tin mà Quý khách CẦN.
HỒ THỊ NHỤY.
[Sales Department]
-----------------------------------------
Cellphone: 0918 18 0578 - 0912 979 551
Yahoo : nhuy.pitesco
Skype : nhuyht_vnprice
Emaill : nhuy.pitesco@gmail.com
Water cooled WM series | |
The three phase motors WM series , closed , water cooled , manufactured according to the main international standards and particularly to the IEC 34 and 72 rules, are available in the same sizes, pole numbers and output power of MA and M series , since they make use of the same active components. The steel fabricated outer frame is so manufactured to create an outer cooling circuit. |
Type | In | Mn | ||||
4 POLES | (kW) | rpm | η % | Cos ϕ | (A) | (Nm) |
WM 180L4 | 30 | 1460 | 91,5 | 0.83 | 58 | 196 |
WM 200L4 | 37 | 1470 | 92,9 | 0.84 | 68 | 240 |
WM 225M4 | 55 | 1465 | 93 | 0.85 | 100 | 359 |
WM 250M4 | 75 | 1470 | 90 | 0.8 | 158 | 487 |
WM 280S4 | 90 | 1475 | 93 | 0.87 | 134 | 583 |
WM 315S4 | 132 | 1480 | 94 | 0.86 | 234 | 852 |
WM 315M4 | 160 | 1480 | 94 | 0.86 | 286 | 1032 |
WM 315LR4 | 200 | 1480 | 95 | 0,91 | 335 | 1290 |
WM 315L4 | 250 | 1480 | 95 | 0,91 | 420 | 1590 |
6 POLES | ||||||
WM 180L6 | 20 | 960 | 89.3 | 0.88 | 37 | 199 |
WM 200L6 | 26 | 955 | 89.5 | 0.9 | 47 | 260 |
WM 225M6 | 37 | 970 | 91.3 | 0.86 | 68 | 364 |
WM 250M6 | 45 | 975 | 90.5 | 0.84 | 85 | 441 |
WM 280S6 | 55 | 980 | 90 | 0.87 | 101 | 536 |
WM 280M6 | 75 | 980 | 90 | 0,84 | 143 | 716 |
WM 315S6 | 90 | 985 | 92 | 0.85 | 166 | 873 |
WM 315M6 | 110 | 985 | 92 | 0.86 | 201 | 1066 |
WHY A WATER-COOLED MOTOR?
● High available axis output power with very small motor.
Approximately 30% extra power with respect to a traditional
asynchronous motor.
● Silent operation in all ranges. The motor noise is reduced to only
a few decibels since ventilation is not required.
● No heat output into the operating environment by the motor (air
conditioned rooms).
● Operation in “high” temperature environment without the neces-
sity for derating.
● Increased motor yield. One to two extra percentage points can
be achieved with respect to a traditional asynchronous motor
since ventilation is not required. The four pole WM… motors
belong to category eff2 in accordance with the classification by
CEMEP and the EUROPEAN COMMITTEE.
● Constant torque operation at very low frequencies without the
need for assisted ventilation when powered by a frequency con-
verter.
● Since no cooling air flux is present, motors can be installed in
dusty and flocky environments.
APPLICATIONS:
The WM… motors can be used in machines for plas-
tic materials, controlling extruders and controlling
marble cutting machines, as well as in the steelworks,
paper making industry and mine works to satisfy the
requirements described above.
Fimet Vietnam | Pitesco Vietnam
HẾT HẠN
Mã số : | 10041899 |
Địa điểm : | Hồ Chí Minh |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 18/06/2020 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận