Cảm Biến Từ Balluff Bmf 07M-Ps-C-2-Kpu-02, Balluff Bmf 08M-Ps-C-2-Kpu-05
Liên hệ
D3, Kdc Miếu Nổi, Đinh Tiên Hoàng, F3, Q Bình Thạnh
ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng “Máy móc và các thiết bị, dụng cụ đo lường, kiểm tra công nghiệp/điện-tự động hóa”
Hãy cung cấp thông tin về bất cứ sản phẩm bạn đang cần, chúng tôi bảo đảm về chất lượng, dịch vụ và giá cả tổt nhất.
Hãy liên hệ với chúng tôi để có giá tốt nhất.
0938.214.498 / 0986.025.980 |Mr Cảnh|
Email: canh.ans@ansvietnam.com
Công ty chúng tôi là đại diện phân phối của hãng Balluff các sản phẩm sau:
Magnetic field sensor
Order Code : BMF000E
BMF 07M-PS-C-2-KPU-02
Keyfeatures
| Connection | Cable, 2m, PUR |
|---|---|
| Output function | PNP, Normally open (NO) |
| Series | BMF 07M |
| Special properties | Miniature |
General attributes
| Utilisation category | DC 13 |
|---|---|
| Switching freq. f max. | 10000 Hz |
| Basic standard | IEC 60947-5-2 |
| Function indicator | yes |
| Short-circuit protected | yes |
| Degree of protection as per IEC 60529 | IP67 |
| Protected against polarity reversal | yes |
| Protected against reverse connection | yes |
| Additional text | The sensor is functional again after the overload has been eliminated. The switching distance depends on the magnet used. Switching distances of > 20 mm can be achieved. EMC: Surge immunity; external protection circuit required. Document 825345, Section 2. The sensor is functional again after the overload has been eliminated. The switching distance depends on the magnet used. Switching distances of > 20 mm can be achieved. EMC: Surge immunity; external protection circuit required. Document 825345, Section 2. |
| Series | BMF 07M |
| Special properties | Miniature |
Electrical attributes
| Connection type | Cable |
|---|---|
| Output resistance Ra | Open drain |
| Rated operating voltage Ue DC | 24 |
| Effective operating current Ie | 200 mA |
| Rated insulation voltage Ui | 75 DC |
| Rated short circuit current | 100 A |
| Electrical version | DC, direct current |
| Load capacitance max. (at Ue) | 1 µF |
| No-load current Io damped | 15 mA |
| No-load current Io undamped | 10 mA |
| Off-state current Ir max. | 80 µA |
| Ripple max. (% of Ue) | 15 |
| Switching output | PNP |
| Switching function | Normally open (NO) |
| Voltage drop static max. | 3,1 V |
| Principle of operation | Magnetic |
| Turn-off delay toff max. | 0,05 ms |
| Turn-on delay ton max. | 0,05 ms |
| Rated switching field strength | 1,2 kA/m |
| Assured switching field streng | 2 kA/m |
| Operating voltage | 10...30 V DC |
Mechanical attributes
| Number of conductors | 3 |
|---|---|
| Diameter d1 | D6.5 |
| Cable short designation | LiFYY11Y-O |
| Cable length | 2 m |
| Depth | 30,5 mm |
| Mounting length | 30,5 mm |
| Conductor cross-section | 0.14 mm² |
| Surface protection | Nickel-plated |
| Shock rating | Shock, half-sinus, 30 gn, 11ms |
| Vibration rating | 55 Hz, 1 mm ampl., 3x30 min |
| Ambient temperature Ta max. | 85 °C |
| Ambient temperature Ta min. | -25 °C |
| Degree of contamination | 3 |
| Sensing surface material | PBTP |
| Housing material | CuZn |
| Cable jacket material | PUR |
| Cable diameter D max. | 3,1 |
| Size | D6.5 |
| Ambient temperature | -25...85 °C |
Magnetic field sensor
Order Code : BMF000T
BMF 08M-PS-C-2-KPU-05
General attributes
| Utilisation category | DC 13 |
|---|---|
| Switching freq. f max. | 10000 Hz |
| Basic standard | IEC 60947-5-2 |
| Function indicator | yes |
| Short-circuit protected | yes |
| Degree of protection as per IEC 60529 | IP67 |
| Protected against polarity reversal | yes |
| Protected against reverse connection | yes |
| Additional text | EMC: Surge immunity; external protection circuit required. Document 825345, Section 2. The sensor is functional again after the overload has been eliminated. The switching distance depends on the magnet used. Switching distances of > 20 mm can be achieved. EMC: Surge immunity; external protection circuit required. Document 825345, Section 2. The sensor is functional again after the overload has been eliminated. The switching distance depends on the magnet used. Switching distances of > 20 mm can be achieved. |
| Series | BMF 08M |
Electrical attributes
| Connection type | Cable |
|---|---|
| Output resistance Ra | Open drain |
| Rated operating voltage Ue DC | 24 |
| Effective operating current Ie | 200 mA |
| Rated insulation voltage Ui | 75 DC |
| Rated short circuit current | 100 A |
| Electrical version | DC, direct current |
| Load capacitance max. (at Ue) | 1 µF |
| No-load current Io damped | 15 mA |
| No-load current Io undamped | 10 mA |
| Off-state current Ir max. | 80 µA |
| Ripple max. (% of Ue) | 15 |
| Switching output | PNP |
| Switching function | Normally open (NO) |
| Voltage drop static max. | 3,1 V |
| Principle of operation | Magnetic |
| Turn-off delay toff max. | 0,05 ms |
| Turn-on delay ton max. | 0,05 ms |
| Rated switching field strength | 1,2 kA/m |
| Assured switching field streng | 2 kA/m |
| Operating voltage | 10...30 V DC |
Mechanical attributes
| Number of conductors | 3 |
|---|---|
| Tightening torque max. | 3 Nm / 6 Nm |
| Diameter d1 | M08x1.0 |
| Cable short designation | LiFY11Y-O |
| Cable length | 5 m |
| Depth | 30,5 mm |
| Mounting length | 30,5 mm |
| Conductor cross-section | 0.14 mm² |
| Surface protection | Nickel-plated |
| Shock rating | Shock, half-sinus, 30 gn, 11ms |
| Vibration rating | 55 Hz, 1 mm ampl., 3x30 min |
| Ambient temperature Ta max. | 85 °C |
| Ambient temperature Ta min. | -25 °C |
| Degree of contamination | 3 |
| Sensing surface material | PBTB |
| Housing material | CuZn |
| Cable jacket material | PUR |
| Cable diameter D max. | 3,1 |
| Size | M08 |
| Ambient temperature | -25...85 °C |
| BMF000A | Cable with connector, M08x1-S49, 0,3m, PUR | NPN, Normally open (NO) | BMF 07M | Miniature |
| BMF000C | Cable with connector, M08x1-S49, 0,3m, PUR | NPN, Normally open (NO) | BMF 07M | Miniature |
| BMF00C7 | Connector, M12x1-S04 | PNP, Normally open (NO) | BMF 12M | |
| BMF00CN | Cable with connector, 0,3m, PUR | PNP, Normally open (NO) | BMF 07M | Miniature |
| BMF000E | Cable, 2m, PUR | PNP, Normally open (NO) | BMF 07M | Miniature |
| BMF000F | Cable, 3m, PUR | PNP, Normally open (NO) | BMF 07M | Miniature |
| BMF000H | Cable, 15m, PUR | PNP, Normally open (NO) | BMF 07M | Miniature |
| BMF000J | Cable with connector, M12x1-S04, 0,6m, PUR | PNP, Normally open (NO) | BMF 07M | Miniature |
| BMF000K | Cable with connector, M08x1-S49, 0,3m, PUR | PNP, Normally open (NO) | BMF 07M | Miniature |
| BMF000L | Cable with connector, M08x1-S49, 0,3m, PUR | PNP, Normally open (NO) | BMF 07M | Miniature |
| BMF000M | Cable, 2m, PUR | NPN, Normally open (NO) | BMF 08M | |
| BMF000N | Cable, 3m, PUR | NPN, Normally open (NO) | BMF 08M | |
| BMF000P | Cable, 2m, PUR | PNP, Normally open (NO) | BMF 08M | |
| BMF000R | Cable, 3m, PUR | PNP, Normally open (NO) | BMF 08M | |
| BMF000T | Cable, 5m, PUR | PNP, Normally open (NO) | BMF 08M | |
| BMF000U | Cable with connector, M08x1-S49, 2,5m, PUR | PNP, Normally open (NO) | BMF 08M | |
| BMF000W | Cable, 0,54m, FLRY-B | PNP, Normally open (NO) | BMF 08M | |
| BMF001Z | Connector, M08x1-S49 | PNP, Normally open (NO) | BMF 10E | |
| BMF0008 | Cable, 2m, PUR | NPN, Normally open (NO) | BMF 07M | Miniature |
| BMF0009 | Cable, 3m, PUR | NPN, Normally open (NO) | BMF 07M | Miniature |
| BMF0021 | Connector, M12x1-S04 | NPN, Normally open (NO) | BMF 12M | |
| BMF0022 | Connector, M12x1-S04 | PNP, Normally open (NO) | BMF 12M |
Chúng tôi rất mong được hợp tác thành công và vui vẻ với Quý khách!
Võ Hồng Cảnh |Canh Mr|
I Sales Eng . I
====================
I cellphone I +84 986025980
+84 938214498
I email I canh.ans@ansvietnam.com
HẾT HẠN
0938 214 498
| Mã số : | 7909129 |
| Địa điểm : | Hồ Chí Minh |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 09/07/2018 |
| Loại tin : | Thường |
Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!
Gợi ý cho bạn
Bình luận