Model: Av5-8Yp000 Cảm Biến Nidec Avtron Av56A1Tdx1Yxg015 Is Replaced By: Av56A1Kdx6Yxgp51

Avtron AV5 SMARTach™ III Sensor
Module for AV485/AV685/AV850

Avtron AV5 SMARTach™
III
Š Wide-Gap Technology Eliminates
Gapping and Shimming
Š Mount in AV485, AV685, and AV850
Encoders
Š Direct Machine-Mount Option
Š Permits Up to 4.5" [115mm] ThroughShaft
Š Fully Potted Electronics
Š -40°C to +100°C Standard; +120°C
Option Requires Encoder Cooling
Š 3 Year No-Hassle Warranty
Avtron AV5 SMARTach III™ sensors are magnetoresistive, severe duty incremental
quadrature sensors for the AV485, AV685, or AV850 rotary encoders. The AV5 is also
usable in applications where an encoder housing is not needed – simply mount the AV5
with your bracket, and use an AV850 or other rotor. Also available: XR5 and XR12 sensors
for hazardous duty applications or XP5 for applications where explosion proof is a
requirement.
The AV5 is ideal for applications where mounting on a large diameter through-shaft is
needed, including large hollow shafts for cooling water or air. The AV5 sensor + AV850
rotor combination permits through-shafts up to 4.5" [115mm].
The AV5 offers a full range of electrical connector options, including IP67 cable, IP66 MS
connectors, and IP65 Industrial with built-in terminal strips. The AV5 sensor is fully protected
against all types of wiring errors, including short circuits, reverse voltage, and phase-tophase shorts. It is one tough sensor! For larger bore applications, use AV12 sensors with
the AV125 encoder (or as stand-alone).
The universal 5-24V design drives longer cables and is protected against wiring errors and
surges.
Adaptive Electronics: At power-up you know you installed it right! The green LED tells you
your AV5 Sensor is aligned with the rotor and reading signal. If at any time, the AV5 cannot
produce consistent signals, the LED changes to red and the optional remote alarm contact
activates. However, the encoder keeps working to give you time to schedule service. Even
wiring errors and short circuits that cause an over-temp situation will be detected and
indicated by changing the LED to orange.

MORE AV5 ADVANTAGES
Š High resolution up to 5000 PPR
Š Sensor PPR can be factory reprogrammed
Š Full protection against short circuits, reverse voltage, phase-to-phase shorts
Š High-power outputs for long cable runs
Š Optional 24V in, 5V out option for low-voltage, long-cable applications
Š Diagnostic LED and alarm output contact indicates proper operation
AV5 SPECIFICATIONS
Operating Power: Volts: 5 - 24 VDC*
Current: 100mA nom, no load
Output Format: A Quad B with Marker (A,A–, B,B–, Z,Z–)
Second Isolated Output: Optional
Frequency Range: @5V, @1m cable, 250 kHz Max
@24V, @300m cable, #8 output, 45 kHz Max
Maximum Cable Length: 1000'
PPR: 4 - 50000***
Speed: 5400 RPM Max****
Electronics: Fully Encapsulated, IP67**
Temperature: -40° to 120°C (150°C rotor)^
Vibration: 18 g’s
Shock: 1 meter drop test
Chemical: Polyurethane enamel paint protects against salt spray, mild acids, and bases.
Weight: 2 - 3 lbs [0.9 - 1.36 kg] (will vary by connector options)
* Electrical specifications for SMARTach III model (serial #30,000 or higher), consult Nidec
Industrial Solutions for earlier model specifications.
** Certain connector options may reduce IP rating.
***(PPR) Standard maximum PPR is 5000. Consult Factory with your application for PPRs up to
50,000.
**** (Speed) Maximum RPM may be limited for PPR > 2,500. Consult Factory with your
application.
^ Requires air cooling system option in AV485 & AV685 to reach +120°C rating
All dimensions are in inches [millimeters].
Specifications and features are subject to change without notice.