Liên hệ
27/35 Cộng Hòa, P.4, Q.tân Bình
1. Tên sản phẩm: Thảm an toàn UM/MC3
Thảm (Safety mat) là thiết bị giúp phát hiện sự hiện diện của vật thể, hoạt động dựa vào nguyên tắc áp lực.
Mỗi chiếc thảm an toàn có cấu tạo cơ bản là một công tắc thường mở đơn giản. Khi có con người bước chân lên thảm, sức nặng của con người sẽ đè lên công tắc và đóng công tắc đó lại; khi đó, một tín hiệu dừng máy sẽ được gửi tới máy.
Cũng giống như máy quét laser khu vực, có chức năng bảo vệ an toàn trong một vùng rộng, giúp cách ly con người với vùng nguy hiểm. Thảm an toàn được sử dụng khi điều kiện môi trường không phù hợp để sử dụng máy quét laser khu vực
2. Thông tin kĩ thuật
Ratings
Safety mat controller
Power input
Model | MC3 |
---|---|
Power voltage | 24 VDC |
Operating voltage range | -15% to +15% of rated supply voltage |
Power consumption * | 3 W max. |
Switch
Model | MC3 |
---|---|
Rated load | 6 A at 230 VAC/6 A at 24 VDC (resistive load) 5 A at 230 VAC (AC15)/2 A at 24 VDC (DC13) (inductive load) |
Maximum rated voltage | 250 VAC/24 VDC |
Rated carry current | 6 A |
Maximum switching capacity | 1,500 VA |
Characteristics
Safety Mat
Model | UM |
---|---|
Detection method | Pressure sensing method |
Detection weight | 30 kg min. |
Maximum allowable load | 2,000 N (EN1760-1 requirement) |
Mechanical durability | 1 million cycles min. |
Material | PVC (Polyvinyl Chloride) |
Ambient operating temperature | -37 to 66°C (with no icing or condensation) |
Degree of protection | IP67 |
Weight | Approx. 24.4 kg/m2 |
Safety Mat Controller
Model | MC3 | |
---|---|---|
Response time | 30 ms max. | |
Safety input | Four-wire Safety Mat only Mat can be connected in series (Connectable number: 12 max.) The external impedance must be 8 Ω or less between M11 and M21 and between M12 and M22. | |
Safety output | SPDT-NO | |
Auxiliary output | SPDT-NC | |
Insulation resistance | 20 MΩ min. (at 500 VDC) | |
Dielectric strength | Between different poles of outputs | 1,800 VAC, 50/60 Hz for 1 sec. |
Between power supply and output | ||
Vibration resistance | Malfunction: 10 to 55 Hz, 0.15 mm single amplitude | |
Mechanical shock resistance | Malfunction: 98 m/s2 | |
Durability | Mechanical | 10,000,000 cycles min. |
Electrical | 100,000 cycles min. (rated load, switching frequency: 360 cycles/hour) | |
Ambient operating temperature | 0 to 55°C (with no icing or condensation) | |
Ambient operating humidity | 0% to 90% RH | |
Degree of protection | IP20 | |
Terminal tightening torque | 0.5 Nm | |
Weight | Approx. 360 g |
3. Thông tin đặt hàng
Safety outputs | Auxiliary outputs | Rated voltage | Terminal block type | Model |
---|---|---|---|---|
SPDT-NO | SPDT-NC | 24 VDC | Screw terminals | MC3 |
Dimensions | Black | Yellow | |
---|---|---|---|
A (mm) | B (mm) | Model | Model |
300 | 300 | UMM5-0300-0300 | UMYM5-0300-0300 |
400 | 400 | UMM5-0400-0400 | UMYM5-0400-0400 |
500 | 250 | UMM5-0500-02500500-0250 FREE | UMYM5-0500-02500500-0250 FREE |
500 | 400 | UMM5-0500-04000500-0400 FREE | UMYM5-0500-04000500-0400 FREE |
500 | 500 | UMM5-0500-05000500-0500 FREE | UMYM5-0500-05000500-0500 FREE |
500 | 1500 | UMM5-0500-15000500-1500 FREE | UMYM5-0500-15000500-1500 FREE |
600 | 400 | UMM5-0600-0400 | UMYM5-0600-0400 |
750 | 250 | UMM5-0750-02500750-0250 | UMYM5-0750-02500750-0250 |
750 | 500 | UMM5-0750-05000750-0500 | UMYM5-0750-05000750-0500 |
750 | 750 | UMM5-0750-07500750-0750 | UMYM5-0750-07500750-0750 |
750 | 1500 | UMM5-0750-15000750-1500 | UMYM5-0750-15000750-1500 |
1000 | 500 | UMM5-1000-0500 | UMYM5-1000-0500 |
1000 | 750 | UMM5-1000-0750 | UMYM5-1000-0750 |
1000 | 1000 | UMM5-1000-1000 | UMYM5-1000-1000 |
1000 | 1250 | UMM5-1000-1250 | UMYM5-1000-1250 |
1000 | 1500 | UMM5-1000-1500 | UMYM5-1000-1500 |
Trims
Appearance | Name | Model | Remarks |
---|---|---|---|
Ramp Trim with Yellow PVC Cover (1.22 m) | UMRT4 | Installed on the perimeter of the Safety Mat. Each Trim is composed of two parts, an aluminum base and a PVC Cover. Possible to install cables inside. | |
Ramp Trim with Yellow PVC Cover (2.44 m) | UMRT8 | ||
Joining Trim (1.22 m) | UMJS4 | The Joining Trims join the Safety Mats when two or more Safety Mats are being combined. In addition to joining the Safety Mats, the Joining Trims preserve the Safety Mat''s sensitivity at the joints. | |
Joining Trim (2.44 m) | UMJS8 | ||
Aluminum Ramp Trim (2.44 m) | UMAL | Installed on the perimeter of the Safety Mat. | |
Molded Outside Corner | UMOC | Installed at the outside corners of the Safety Mat combining with Ramp Trims with Yellow PVC Cover. | |
Molded Inside Corner | UMIC | Installed at the inside corners when two or more Safety Mats combining with Ramp Trims with Yellow PVC Cover are being combined. |
Appearance | Name | Model | Remarks |
---|---|---|---|
Distribution Box (for six mats) | UMDB-6 | Used to connect to two or more Safety Mats to the single MC3 Safety Mat Controller. | |
Waterproof Cover | XS2Z-22 | Used to protect the unused connectors of UMDB-6. | |
HẾT HẠN
Mã số : | 11804107 |
Địa điểm : | Hồ Chí Minh |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 30/08/2015 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận