986.144.718₫
Giai Phong
Lời đầu tiên Cty Weldtec (Mr. Hiệp 0986.144.718) xin gửi lời chúc sức khỏe và thành công đến quý công ty và doanh nghiệp. Với kinh nghiệm trong lĩnh vực cung cấp thiết bị và vật liệu hàn, cắt Weldtec tự hào là doanh nghiệp lớn và uy tín hàng đầu Việt Nam. Các sản phẩm của Weldtec đã được đông đảo người dùng, công ty cơ khí, đóng tầu, dầu khí... sử dụng và đánh giá rất cao về chất lượng cũng như các dịch vụ sau bán hàng. Hiện nay Weldtec là nhà phân phối các sản phẩm hàn, cắt của các hãng nổi tiếng thế giới như:
- LINCOLN( Mỹ ), P anasonic (Nhật), CEA (Ý), Hypertherm (Mỹ)....
Chúng tôi hân hạnh là đại lý ủy quyền của hãng thiết bị hàn danh tiếng thế giới LINCOLN ELECTRIC ký hợp đồng tháng 3 năm 2012 tại Việt Nam.
Chúng tôi được phép nhập khẩu trực tiếp và phân phối tất cả các sản phẩm được sản xuất bởi các nhà máy của LINCOLN ELECTRIC trên toàn thế giới.
Alloy Type | Item | Brandname | Classification | Dia. Range (mm) | All Weld Metal Mechanical Properties, Typical | All Weld Metal Chemical Compostions (Wt-%), Typical | Current Polarity | Welding Position | Applications | ||||||||||||||||
AWS | GB | Others | Condition | Rel / Rp0.2 | Rm | A5 | CVN Toughness | C | Mn | Si | P | S | Cr | Mo | V | Ni | Other | ||||||||
A5.5 | 5118 | MPa | MPa | % | Temp. ℃ | Volume J | |||||||||||||||||||
Cryogenitic & Weather resistant low alloy stick electrodes | 14 | JW-815C1 | -- | E5515-C1 | W707H | 2.6~5.0 | 620℃*1h | 490 | 590 | 30 | -60 | 113 | 0.068 | 1.13 | 0.53 | 0.01 | 0.004 | 0.067 | 0.034 | 0.003 | 2.57 | DCEP | F, V, OH, H | Very good toughness at low temperature (down to -60℃ to -70℃), good resistance to cold cracking. Suitable for welding of 2.5%Ni cryogenitic steels, including LPG tank, terminal and pipeline. | |
15 | JW-818C3 | E8018-C3 | E5518-C3 | 2.6~5.0 | as-welded | 490 | 595 | 32 | -40 | 134 | 0.064 | 0.87 | 0.23 | 0.011 | 0.007 | 0.088 | 0.031 | 0.005 | 1.03 | AC / DCEP | F, V, OH, H | Very good toughness at low temperature (dowm to -40℃), good resistance to cold cracking. Suitable for welding of high strength fine grains steels such as ASTM A266, 235, 236, 302 etc, Including steel structural, bridges. | |||
16 | JAC-03G | -- | E5003-G | 2.6~5.0 | 620℃*1h | 455 | 535 | 25 | -20 | 66 | 0.11 | 0.65 | 0.27 | 0.022 | 0.012 | 0.36 | 0.32 | AC / DCEP | F, V, OH, H | Suitable for welding of Ni/Cu/Cr weather resistance steels, including weather resistance vehicles, trains, onshore steel structurals. | |||||
17 | JAC-816W | E8018-W2 | E5518-W | 2.6~5.0 | as-welded | 515 | 590 | 24 | -20 | 104 | 0.063 | 0.72 | 0.56 | 0.022 | 0.008 | 0.56 | 0.67 | AC / DCEP | F, V, OH, H | Suitable for welding of Ni/Cu/Cr weather resistance steels such as ASTM A588, A242, SMA58, including weather resistance vehicles, trains, onshore steel structurals. | |||||
18 | JAC-502WCu | -- | E5003-G | 2.6~5.0 | 620℃*1h | 445 | 530 | 25 | -20 | 66 | 0.11 | 0.63 | 0.24 | 0.023 | 0.019 | 0.032 | 0.016 | AC / DCEP | F, V, OH, H | Suitable for welding of Ni/Cu/Cr weather resistance steels such as 09MnCuPTi, 15MnCuCr, including weather resistance vehicles, trains, onshore steel structurals. | |||||
19 | JAC-818W2 | E8018-W2 | E5518-W | 2.6~5.0 | as-welded | 550 | 630 | 25 | -20 | 114 | 0.063 | 0.86 | 0.42 | 0.018 | 0.01 | 0.52 | 0.52 | AC / DCEP | F, V, OH, H | Suitable for welding of Ni/Cu/Cr weather resistance steels, including weather resistance vehicles, trains, onshore steel structurals. |
Type | Item | Brandname | Classification | Dia. Range [mm] | All Weld Metal Mechanical Properties, Typical | All Weld Metal Chemical Compostions [Wt-%], Typical | Current Polarity | Welding Position | Applications | ||||||||||||||||
AWS | GB | Others | Condition | Rel/Rp0.2 | Rm | A5 | CVN Toughness | C | Mn | Si | P | S | Cr | Mo | V | Ni | Other | ||||||||
A5.5 | 5118 | [MPa] | [MPa] | [%] | Temp. [℃] | Volume [J] | |||||||||||||||||||
Low Alloy Mn-Mo High Strength Steel Covered Electrode | 1 | JL-915D1 | E9015-D1 | E6015-D1 | 2.6~5.0 | 620℃*1h | 550 | 640 | 22 | -30 | 75 | 0.079 | 1.42 | 0.37 | 0.019 | 0.015 | 0.09 | 0.4 | 0.14 | 0.019 | DCEP | F, V, OH, H | Excellent weldability, very low hydrogen content in weld metal. good resistance to cold cracking, robust toughness at low temperature. Suitable for welding of equal high strength steels. Including heavy machinery, crane, special vehicle, bridge and offshore. | ||
2 | JL-916D1 | -- | E6016-D1 | 2.6~5.0 | 620℃*1h | 530 | 620 | 25 | -30 | 107 | 0.06 | 1.32 | 0.33 | 0.023 | 0.014 | 0.066 | 0.38 | 0.005 | 0.019 | AC / DCEP | F, V, OH, H | Excellent weldability, very low hydrogen content in weld metal. good resistance to cold cracking, robust toughness at low temperature. Suitable for welding of equal high strength steels. Including heavy machinery, crane, special vehicle, bridge and offshore. | |||
3 | JL-105D2 | E10015-D2 | E7015-D2 | 2.6~5.0 | 620℃*1h | 645 | 735 | 24 | -30 | 81 | 0.073 | 1.8 | 0.55 | 0.025 | 0.008 | 0.44 | 0.62 | DCEP | F, V, OH, H | Excellent weldability, very low hydrogen content in weld metal. good resistance to cold cracking, robust toughness at low temperature. Suitable for welding of equal high strength steels. Including heavy machinery, crane, special vehicle, bridge and offshore. |
Alloy Type | Item | Brandname | Classification | Dia. Range (mm) | All Weld Metal Mechanical Properties, Typical | All Weld Metal Chemical Compostions (Wt-%), Typical | Current Polarity | Welding Position | Applications | ||||||||||||||||
AWS | GB | Others | Condition | Rel / Rp0.2 | Rm | A5 | CVN Toughness | C | Mn | Si | P | S | Cr | Mo | V | Ni | Other | ||||||||
A5.5 | 5118 | MPa | MPa | % | Temp. ℃ | Volume J | |||||||||||||||||||
Creep Resistant low alloy stick electrodes | 1 | JR-715A1 | E7015-A1 | E5015-A1 | R107 | 2.6~5.0 | 620℃*1h | 495 | 583 | 28 | ambient | 160 | 0.056 | 0.54 | 0.59 | 0.025 | 0.018 | 0.06 | 0.54 | 0.029 | DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 0.5% Mo Creep resistant steels. Including boilers, chemical vessels, pipeline and crane, steel structural etc where service temperature for weld up to 510℃. | ||
2 | JR-716A1 | E7016-A1 | E5016-A1 | R106 | 2.6~5.0 | 620℃*1h | 490 | 575 | 26 | ambient | 156 | 0.058 | 0.55 | 0.58 | 0.025 | 0.018 | 0.07 | 0.54 | 0.028 | AC / DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 0.5% Mo Creep resistant steels. Including boilers, chemical vessels, pipeline and crane, steel structural etc where service temperature for weld up to 510℃. | |||
3 | JR-718A1 | E7018-A1 | E5018-A1 | R106Fe | 2.6~5.0 | 620℃*1h | 480 | 580 | 28 | ambient | 170 | 0.093 | 0.84 | 0.69 | 0.025 | 0.006 | 0.49 | AC / DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 0.5% Mo Creep resistant steels. Including boilers, chemical vessels, pipeline and crane, steel structural etc where service temperature for weld up to 510℃. | |||||
4 | JR-815B2 | E8015-B2 | E5515-B2 | R307 | 2.6~5.0 | 690℃*1h | 505 | 600 | 25 | ambient | 157 | 0.083 | 0.63 | 0.28 | 0.018 | 0.012 | 1.09 | 0.5 | DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 1.25%Cr-0.5%Mo Creep resistant steels. Including boilers, chemical vessels, pipeline and crane, steel structural etc where service temperature for weld up to 520℃. | ||||
5 | JR-816B2 | E8016-B2 | E5516-B2 | R306 | 2.6~5.0 | 690℃*1h | 590 | 675 | 27 | ambient | 158 | 0.1 | 0.67 | 0.49 | 0.01 | 0.007 | 1.28 | 0.61 | AC / DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 1.25%Cr-0.5%Mo Creep resistant steels. Including boilers, chemical vessels, pipeline and crane, steel structural etc where service temperature for weld up to 520℃. | ||||
6 | JR-818B2 | E8018-B2 | E5518-B2 | R306Fe | 2.6~5.0 | 690℃*1h | 550 | 645 | 20 | ambient | 107 | 0.07 | 0.72 | 0.35 | 0.017 | 0.009 | 1.36 | 0.63 | AC / DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 1.25%Cr-0.5%Mo Creep resistant steels. Including boilers, chemical vessels, pipeline and crane, steel structural etc where service temperature for weld up to 520℃. | ||||
7 | JR-815B2V | E8015-G | E5515-B2-V | R317 | 2.6~5.0 | 730℃*2h | 515 | 595 | 33 | ambient | 186 | 0.064 | 0.66 | 0.36 | 0.018 | 0.006 | 1.09 | 0.44 | 0.12 | DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 1.25%Cr-0.5%Mo-V steels such as 12Cr1MoV. Including boilers, chemical vessel, high temperature pipelines where service temperature for weld up to 540℃ | |||
8 | JR-818B2V | E8018-G | E5518-B2-V | R316Fe | 2.6~5.0 | 620℃*1h | 480 | 575 | 23 | ambient | 90 | 0.055 | 0.71 | 0.52 | 0.024 | 0.018 | 1.24 | 0.48 | 0.16 | 0.02 | AC / DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 1.25%Cr-0.5%Mo-V steels such as 12Cr1MoV. Including boilers, chemical vessel, high temperature pipelines where service temperature for weld up to 540℃ | ||
9 | JR-915B3 | E9015-B3 | E6015-B3 | R407 | 2.6~5.0 | 690℃*1h | 570 | 655 | 23 | ambient | 144 | 0.074 | 0.8 | 0.41 | 0.023 | 0.009 | 2.47 | 1.16 | DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 2.25%Cr-1%Mo creep resistant steels. Including boilers, chemical vessel, high temperature pipelines where service temperature for weld up to 550℃. | ||||
10 | JR-916B3 | E9016-B3 | E6016-B3 | R406 | 2.6~5.0 | 690℃*1h | 555 | 655 | 21 | ambient | 168 | 0.061 | 0.85 | 0.35 | 0.02 | 0.005 | 2.47 | 1.16 | 0.031 | 0.069 | AC / DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 2.25%Cr-1%Mo creep resistant steels. Intended for thermal power plant, chemical vessel, high temperature steam pipe industry where service temperature for weld up to 550℃. | ||
11 | JR-918B3 | E9018-B3 | E6018-B3 | R406Fe | 2.6~5.0 | 690℃*1h | 600 | 695 | 19 | ambient | 105 | 0.07 | 0.76 | 0.31 | 0.019 | 0.008 | 2.21 | 1.09 | AC / DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 2.25%Cr-1%Mo creep resistant steels. Including boilers, chemical vessel, high temperature pipelines where service temperature for weld up to 550℃. | ||||
12 | JS-502V | E8015-G | -- | -- | 2.6~5.0 | 750℃*4h | -- | 570 | 28 | -- | -- | 0.084 | 0.67 | 0.21 | 0.02 | 0.007 | 5.43 | 0.53 | 0.27 | DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 5%Cr-1%Mo creep resistant steels. Including boilers, chemical vessel, high temperature pipelines. | |||
13 | JR-915B9 | E9015-B9 | -- | -- | 2.6~5.0 | 760℃*2h | 595 | 705 | 20 | ambient | 66 | 0.084 | 0.66 | 0.21 | 0.009 | 0.008 | 9.42 | 1.06 | 0.18 | Nb:0.036 N:0.048 | DCEP | F, V, OH, H | Good weldability, high resistance to cold cracking, very low hydrogen content in weld metal. Suitable for welding of 9%Cr-1%Mo creep resistant steels such as T91/P91. Including boilers, chemical vessel, high temperature |
01 | Dây hàn tự động thép đen tiêu chuẩn EL8 PREMIERWELD L8 ( Lincoln sx tại nhà máy TQ) | KG | 2.4mm | 39.500 |
3.2mm | 31.000 | |||
4.0mm | 30.000 | |||
02 | Dây hàn tự động thép đen, tiêu chuẩn EM12K PREMIERWELD M12K ( Lincoln sx tại nhà máy TQ) | KG |
|
|
3.2mm | 34.500 | |||
4.0mm | 34.000 | |||
B. THUỐC HÀN | ||||
01 | Thuốc hàn tự động cho nhiều lớp PREMIERWELD BF-1 ( Lincoln sx tại nhà máy TQ) | KG |
| 32.500 |
02 | Thuốc hàn tự động cho bình bồn nhỏ PREMIERWELD NF-3 ( Lincoln sx tại nhà máy TQ) | KG |
| 33.500 |
03 | Thuốc hàn tự động cho hàn tốc độ cao, cho thép nhiều rỉ PREMIERWELD AF-5 ( Lincoln sx tại nhà máy TQ) | KG |
| 42.000 |
CaO+MgO | Al2O3 + MnO2 | SiO2 + TiO2 | CaF2 | S | P |
29.8% | 22.1% | 26.7% | 17.63% | 0.01% | 0.02% |
Al2O3 + SiO2+MgO | Al2O3 | CaF2 | S | P |
48.8% | 22.1% | 9.1% | 0.01% | 0.02% |
Thuốc hàn tự động cho hàn tốc độ cao, cho thép nhiều rỉ
PREMIERWELD AF-5
APPLICATIONAl2O3 + SiO2 | MgO | MnO | CaF2 | S | P |
52.6% | 16.5% | 13.9% | 6.3% | 0.01% | 0.03% |
( Liên hệ 0986.144.718 để có giá tốt nhất khi khách hàng có nhu cầu lấy hàng)
Người liên hệ: Trần Trọng Hiệp
Mobile : 0986.144.718
Email: hiepbk0210@gmail.com
HẾT HẠN
Mã số : | 8487885 |
Địa điểm : | Hà Nội |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 21/09/2020 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận