Hãy liên hệ trực tiếp với chúng tôi
CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ ANH NGHI SƠN
Lương Vi Thành (Mr.)
| Senior Sales Eng . |
=================================
| Cellphone | +84 1693 630 777 hoặc +84 916 394 114
| Email | thanh.ans@ansvietnam.com
========== Online contact ==========
| Yahoo | thanh_ans | Skype | vithanh_ans
để được hỗ trợ TỐT NHẤT với thời gian NHANH NHẤT !
Uy tín - Chất lượng - Hiệu quả - Tiết kiệm
******
ANS VIETNAM là nhà phân phối chính thức tất cả các thiết bị của hãng Mesa Labs tại Việt Nam
Chúng tôi xin giới thiệu một số Model thông dụng như sau:
Gold Bottle The Gold Bottle is used to verify the operational repeatability of your Mesa torque analyzer. It is constructed with high energy permanent magnets and can be pre-set at the factory to a customer specified torque value. Each Gold Bottle is labeled with its exact torque rating, serial number and repeats to an accuracy of +/- 0.2 inch pounds. Since the cap torque of this bottle is the torque produced by the permanent magnets, the value will always be the same unless something has changed within the torque analyzer itself. The user is thus able to quickly check their analyzer without having to go through the calibration procedure. The Gold Bottle is fitted with a specifically identified customer closure to match the customer’s chuck. Specifications Torque Range: .5-4 in-lbs Repeatability: +/- 0.2 in-lbs Torque Range: 3-16 in-lbs Repeatability: +/- 0.2 in-lbs Torque Range: 8-43 in-lbs Repeatability: +/- 0.2 in-lbs |
Torqo II+, standard (40IN/LB) | mesalab | Part no: 51.1600.40 | 1506 Bevrage Bottle Clamp | Mesalab | Part no: 53.500220 | Small Universal EDM Chuck (26-30mm) | Mesalab | Part no: 54.000510 | Gold Bottle, Standard (12IN/LB) | Mesalab | Part no: 52.100030 | Torqo Calibration Weights (40IN/LB) | Mesalab | Part no: 53.501640 | Start up and Training | mesalb | |
Torqo II+, standard (40IN/LB) | mesalab | Part no: 51.1600.40 | 1506 Bevrage Bottle Clamp | Mesalab | Part no: 53.500220 | Small Universal EDM Chuck (26-30mm) | Mesalab | Part no: 54.000510 | Gold Bottle, Standard (12IN/LB) | Mesalab | Part no: 52.100030 | Torqo Calibration Weights (40IN/LB) | Mesalab | Part no: 53.501640 | Start up and Training | mesalb | |
|
| Mesalabs Vietnam | Torqo 1600 Non-destructive Cap Torque Tester | | Code: 51.1600.30 | | Torqo II+ , Standard (30 In/Lb) | | Note: day la model ben AGR tu van THP su dung se thay the cho san pham Twist Check ma AGR khong con san xuat nua. Minh cung da tu van bao Mark 10 | | THis is for a Mesa Labs Torqo 1600 with 2 sets of small and medium tooling. It is important to understand that we can not make tooling unless we receive at least 2 each cap and bottle samples. You may need more or less of this tooling. Typically you need 1 set of tooling for each size bottle. | | Most users also need to buy a gold verification bottle. THis is a daily 10 second check of the torqo to make sure it is operating correctly. | | Mesalabs Vietnam | Code: 52.100030 | | 1612 Std Gold Bottle (3 To 16 In/Lb) | | Mesalabs Vietnam | Code: 54.000180 | | EDM Chuck Medium (33mm to 43mm) | | Mesalabs Vietnam | Code: 54.000160 | | EDM Chuck Small (0 To 32mm) | | Mesalabs Vietnam | Code: 53.500030 | | Torqo Calibration Kit Std (Includes Bracket & Cal Beam) |
|
Manual Torque Testers 
The ST Series of Manual Cap Torque Analyzers are designed to measure application and removal torque of bottle caps up to 50 lbFin [5.65 Nm].
- Automatic output, data storage, and zeroing upon bottle cap removal helps automate testing processes
- 1,000-point data memory with statistics and outputs
- Programmable set point indicators and outputs for pass/fail determination
- Password protection prevents unauthorized changes
- MESURTM Lite data collection software included
- Capacity and resolution: 25 or 50 x 0.01 lbFin, 400 x 0.2 ozFin, 28 x 0.02 kgFcm, 290 x 0.2 Ncm, 2.9 x 0.002 Nm
- Accuracy: +0.3% of full scale
- Maximum overload: 150%
- Torque tests: Closure Application/Removal
- Sampling rate: 7,000 Hz
- Power: AC or battery
- Battery Life: Backlit- up to 7 hours, backlight off- up to 24 hours
- Units: ozFin, lbFin, kgFcm, Nm, Ncm
- Outputs: USB / RS-232, Mitutoyo
- Weight: 8.4 lb
- High-speed 7,000 Hz sampling rate accurately captures peak torque values
- First / second peak detection mode for measuring thread break and bridge peak when testing closures with tamper evident band
- Moveable posts and other available gripping options accommodate a wide range of sample shapes and sizes
- USB, RS-232, Mitutoyo, and analog outputs
|
Torqo 1600 Non-Destructive Cap Torque Tester 
More Information Torqo Accessories Torqo Model Comparison Matrix
- Length: 18 in. (45cm)
- Width: 13.8 in. (35 cm)
- Height: 32 in. (82 cm) 32 in.
- Weight: 160 lbs (Ship wt.)
- Torque Range In-Lb (N-m): 5 – 200 in-lbs
- Accuracy: +/- 0.125% FS on 5-20 in-lbs models, +/- 0.5% FS on 30-200 in-lbs models
- Resolution: 1:1000
- Speed Range: 1 RPM (1-8 RPM w/ multi-speed option)
- Input/Outputs: RS-232 Cable, USB, Ethernet
- Voltage: 100/240 VAC, 50/60 Hz
- Amperage: 2.0A max
- Operation Humidity: up to 90% (non-condensing)
- Operation Temperature: 32-100°F (0 – 40°C)
- CE Certification: Yes
- Child resistant testing
- Multi-speed motor
- Custom tooling
- Customizable data communication
- Data acquisition
- Printer
- Training and service
|
Laboratory Calibration Kit
For use when calibrating SureTorque Model ST-120, ST-LAB, ST-S3 and ST-Inline torque testers. Includes:
- Wire
- Certified hook weights (2, 5 & 10 lb.)
- Frame*
- Pulleys* (0.5, 1, 1.5, and 2” radius)
Check linearity of the calibration at 3 theoretical torque values (0, 10 and 20 lb-in) *Pulley shaft length and frame configuration may vary depending on torque tester model. |
Bình luận