Liên hệ
Tầng 2, Số 16 Lê Đại Hành, Minh Khai, Hồng Bàng, Hải Phòng
CÔNG TY CP VẬT TƯ TRANG THIẾT BỊ Y TẾ VIỆT PHÁP CUNG CẤP
TRIMAX Laser Imaging Films
Infrared sensitive photothermographic films:
TRIMAX TXB Laser Imaging Film
TRIMAX TXB+ Laser Imaging Film
TRIMAX TXM Laser Imaging Film
TRIMAX TXM+ Laser Imaging Film
1) Description
TRIMAX Laser Imaging Films are high resolution, photothermographic, gray-scale films suitable for continuous-tone medical imaging. These films provide excellent diagnostic visualization of fine detail, sharp image rendition, and a cool image tone. TRIMAX Laser Imaging Films are infrared sensitive films that are used in TRIMAX Laser Imaging Systems.
TRIMAX Laser Imaging Film is designed to record a full range of images from various modalities including computed tomography, digital subtraction angiography, magnetic resonance imaging, nuclear medicine, ultrasound, computed radiography, digital radiography, and digitized film images.
Within the TRIMAX film family, there are two major classifications of use:
• General purpose diagnostic films (TXB and TXB+) which are used for general purpose diagnostic use.
• Mammography films (TXM and TXM+) which are used for mammographic diagnosis, including screening mammography.
TRIMAX Laser Imaging Films are coated on blue, 7-mil polyester base supports.
2) Safelight
TRIMAX Laser Imaging Systems are designed for daylight use. Should it be necessary to open a box or cartridge of
TRIMAX Laser Imaging Film outside of the Laser Imager, use a green safelight, ~550nm transmittance
(KODAK 7B type) with a frosted 7-1/2 watt bulb, located at least 1.2 m (4 feet) from the film. Light from luminous watches, cell phones and darkroom light leaks should be avoided.
3) Storage and Handling
Handling -
Hands must be clean, dry and free of lotions, etc. Film should be handled carefully by the edges to avoid physical strains
such as pressure, creasing, or buckling.
Storage -
Store unexposed TRIMAX Laser Imaging Film at 4° to 24° C (39° to 75° F), at 30 to 50 % RH, and properly shielded from
x-rays, gamma rays, or other penetrating radiation. Processed film should be stored at 16 to 27° C (60 to 80° F), at 30 to 50% RH.
4) Sensitometric Performance
Sensitometric Parameters
Maximum Printed Density (Dmax): |
Maximum density of processed film when printed in appropriate TRIMAX Laser Imager. |
Contrast: |
Measured as slope of the D-logE curve between densities of 0.60 and 2.00 above gross fog. |
Minimum Printed Density (Dmin): |
Minimum density of processed film in non-image areas when printed in appropriate TRIMAX Laser Imager. |
Sensitometric Characteristics
|
|
Notice: While the data presented are typical of production coatings, they do not represent standards which must be met by the manufacturer. Varying storage, exposure, and processing conditions will affect results. The company reserves the right to change and improve the product characteristics at any time.
5) Automated Processing
TRIMAX Laser Imaging Films are processed automatically by the thermal processor drum built into all TRIMAX Laser
Imagers. The nominal processing conditions for these photothermographic films are 122°C for 15 seconds.
The contents of this publication are subject to change without notice.
Công ty chúng tôi cam kết cung cấp sản phẩm với CHẤT LƯỢNG TỐT - GIÁ RẺ NHẤT THỊ TRƯỜNG!HẾT HẠN
Mã số : | 13095954 |
Địa điểm : | Hải Phòng |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 11/04/2016 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận