Thiết Bị Thu Quang Fttb Catv 4 Output. B9428
Liên hệ
62 Bà Triệu - Hoàn Kiếm - Hà Nội - Việt Nam
Four outputs FTTB CATV optical receiver
Model: B9428, B9428/WF, B9428/WD
Product description:
B9428 product series, 47~862MHz operate bandwidth, output level Vo=88dBμV (Pin=-2dBm), suitable for FTTP optical fiber access network, which is a low power consumption, high performance, and excellent cost performance RFTV broadcast network ONU(Optical network unit).
This series of product adopts high sensitivity receiving tube and Huatai special low noise matching circuit Under 3.8% modulation, when transmitting in full channels and with receiving power of -10dBm, the CNR can still reach high index of 45dB. Therefore, if adopting B9428, it is only need very low optical power to reach 45dB CNR required by the user.
The product built-in RF inter-stage gain adjustment. All receiving optical power in the range of +3dBm to -12dBm has good linearity. According to different receiving optical power, the user can choose high CNR and suitable output level.
B9428 optical port have following three modes:
- B9428/NC: RFTV operates in 1210~1600nm wavelength.
- B9428/WF: built-in channel filter, RFTV operating in1550nm wavelength.
- B9428/WD: built-in CWDM, RFTV operating in 1550nm wavelength, reach GEPON ONU through 1310/1490nm wavelength.
Product feature:
- Extra-low noise (3.8% modulate, -10dBm receive, CNR ≥ 45dB)
- All receiving optical power in the range of +3dBm to -12dBm has good linearity
- In the range of 47~862MHz, all have good flatness (FL≤±1.0dB)
- Built-in inter-stage gain adjustment, can choose high CNR and suitable output level according to different receiving optical power.
- Four-way high level output, can supply service for more users
- Zinc. die-casting all-in-one metal shell, supply safeguards to opto-electrical sensing device
- Low power consumption, high cost performance
Main application:
- FTTH, FTTP, FTTO
- FTTC, FTTN
- HFC
Application cases:
Status indicator:
Input optical power status indicator:
- ≤-13dB LED off
- +3dBm ~ -12dBm Green
- +3dBm Red
Power supply indicator:
- Turn on Green
- Turn off LED off
Matters need attention:
- It has good characteristic when the receiving optical power is in the range of +3dBm ~ -12dBm. When the receiving optical power is in the range of +3dBm ~ -2dBm, it can obtain high system CNR, on the condition that per output level of built-in PAD is adjusted to ≤ 88dBμV (all-channel transmission) to guarantee the system distortion index. When receiving optical power ≤-3dBm, in order to gain high output level and cover more users, the attenuation value of the built-in PAD can be adjusted to minimum.
- The RF is four-port balanced output, and is not access to the system output port. It should be connected to 75Ω fictitious load. (Options).
- It is easy to be maintained because of adapting outside adaptation power. Its power output voltage is DC+12V+1Vand working electricity is 500mA.
Principle:
Technical index:
Performance | Index | Supplement | ||
Optic feature | Operation wavelength | (nm) | 1260~1600 | B9428/NC |
1540~1560 | B9428/WF, B9428/WD | |||
Input wavelength | (nm) | 1310, 1490/1550 | ||
Pass wavelength | (nm) | 1310, 1490 | ||
Channel Isolation | (dB) | ≥40 | 1550 &1490nm | |
Responsivty | (A/W) | ≥0.85 | 1310nm | |
≥0.9 | 1550nm | |||
Receiving power | (dB) | +3 ~ -12 | ||
Optical return loss | (dB) | ≥55 | ||
Optical fiber connector | SC/APC | B9428/WD: LC/APC | ||
RF feature | Work bandwidth | (MHz) | 47 ~ 862 | |
Flatness | (dB) | ≤±1.0 | ||
Output level | (dBμV) | 88 | Pin: -5dBm | |
Output level adjust | (dB) | 0 ~ 18 | MGC | |
Return loss | (dB) | ≥14 | 47 ~ 862MHz | |
Output impedance | (Ω) | 75 | ||
Output port number | 4 | |||
RF tie-in | F-Female | |||
Link feature | Test channel | CH | PAL-D/59CH | NTSC/80CH |
OMI | (%) | 3.8 | ||
CNR1 | (dB) | 56.6 | Pin: -2dBm | |
CNR2 | (dB) | 48.5 | Pin: -8dBm | |
CTB | (dB) | ≤-63 | Vo≤88dBμV | |
CSO | (dB) | ≤-63 | Vo≤88dBμV | |
HUM | (dB) | ≤-60 | ||
General feature | Power supply | (V) | +12VDC | ±1.0V |
Power Consume | (W) | ≤3 | +12VC, 190mA | |
Work temp | (oC) | -20 ~ +50 | ||
Storage temp | (oC) | -40 ~ 85 | ||
Work relative temp | (%) | 5 ~ 59 | ||
Size (W)x(D)x(H) | 4.6x2.9x1.1 (inch) |
| ||
Test data
- Diagram 1: Built-in PAD is 0dB attenuate:
Pin(dBm) | -5 | -6 | -7 | -8 | -9 | -10 | -11 |
Vo(dBμV) | 88 | 86 | 84 | 82 | 80 | 78 | 76 |
CNR(dB) | 52 | 51 | 49.5 | 48.5 | 47 | 45 | 44.3 |
CTB(dB) | 63 | 66 | 68 | 68 | 70 | 68 | 67 |
CSO(dB) | 72 | 72 | 74 | 74 | 69 | 68 | 67 |
- Diagram 2: Built-in PAD is 7dB attenuate:
Pin(dBm) | -1 | -2 | -3 | -4 | -5 | -6 | -7 | -8 | -9 | -10 | -11 |
Vo(dBμV) | 89 | 87 | 85 | 83 | 81 | 79 | 77 | 75 | 73 | 71 | 69 |
CNR(dB) | 57 | 56 | 55 | 54 | 53 | 51.5 | 49.5 | 48 | 47 | 45 | 44 |
CTB(dB) | 62 | 63 | 66 | 66 | 68 | 68 | 68 | 68 | 68 | 68 | 64 |
CSO(dB) | 70 | 72 | 75 | 74 | 73 | 70 | 70 | 68 | 66 | 65 | 62 |
Remark:
- Test condition: PAL-D59CH, OMI=3.8%
- Vo is output level of each port
- Test sample: B9428
Product series:
Model | Input wavelength | Operating wavelength | Pass wavelength | Fiber connector |
B942/NC | 1310/1550nm | 1260~1600nm | - | SC/APC |
B9428/WD | 1310, 1490/1550nm | 1540~1560nm | 1310~1490nm | LC/APC |
B9428/WF | 1310, 1490/1550nm | 1540~1560nm | - | SC/APC |
Model explanation:
Thông tin liên hệ:
CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ VIỄN THÔNG VĂN YẾN VƯƠNG
Địa chỉ: 62 Bà Triệu - Hàng Bài - Hoàn Kiếm - Hà Nội.
Điện thoại: (+84-4) 3944 9539
Fax: (+84-4) 3945 4182
Website: www.vyv.com.vn
Email: contact@vyv.com.vn
HẾT HẠN
| Mã số : | 5675820 |
| Địa điểm : | Hà Nội |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 31/12/2020 |
| Loại tin : | Thường |
Bình luận