Sua May Nen Khi

 
  CÔNG TY KỸ THẬT HỢP NHẤT Với kinh nghiệm nhiều năm trong lĩnh vực thiết bị khí nén, Máy nén khi, Máy sấy khí ....

Với đội ngũ kỹ sư có kỹ năng chuyên nghiệp, phẩm chất đạo đức tốt, tận tụy trong công việc, chúng tôi chắc chắn sẽ mang đến cho Quý Công ty sự hợp tác hiệu quả và những dịch vụ hoàn hảo:

1. Kinh doanh thương mại và dịch vụ:

* Máy nén khí trục vít (BUMA - KOREA) ( ELGI – AN DO )
* Máy sấy khí (LODE STARD)
* Lọc SOTRAS-EU thay thế cho tất cả các loại máy nén khí như: Abac, Alup, Alas copco, Boge, Champion, Compair, Gardner Denver, Hitachi, Ingersoll Rand, Kaeser, Kobelco, Mitsuiseiki, Puma, Fusheng …
* Lọc công nghiệp: Lọc thủy lực, lọc phòng sạch, lọc nước ...
* Bộ trao đổi nhiệt cho máy nén khí, máy sấy khí, hệ thống thủy lực ....
* Phụ tùng máy nén khí (đầu nén, valve solenoid, bạc đạn motor - Air end, ...)
* Dịch vụ & kỹ thuật( thực hiện chế độ hậu mãi chu đáo theo tiêu chuẩn của hãng cung cấp, đảm nhận việc bảo trì, sửa chữa, đại tu cho tất cả các hãng máy nén khí truc vit ...

Nếu Quý vị có quan tâm xin vui lòng liên hệ với chúng tôi ... 

NGUYỄN DO LIÊM
TP Kỹ Thuật & Dịch Vụ
H/P: 0986.343.933   

HOP NHAT TECHNOLOGY CO., LTD
Add: 108 Tô Vĩnh Diện , Phường Linh Chiểu, Quận Thủ Đức, TP Hồ Chí Minh , Viet Nam
Tel: (84.8) 62841 085 / 62841 040        Fax: (84.8) 62841 105
Hanoi office :  Phòng 504, Tòa nhà CT 20 C, Khu Đô Thị Việt Hưng, Long Biên, Hà Nội, Việt Nam. 

Tel: (84.4) 36574162                                Fax: (84.4) 36574163   

Email: liem.nd@hopnhatvn.com           Website: www.hopnhatvn.com 

Skype: bennynguyen_82                Yahoo: bennynguyen_82

FILTERS & PRODUCTS FOR
COMPRESSORS, VACUUM PUMPS
AND COMPRESSED AIR
SOTRAS
PRODUCT QUALITY SUPPORTED
BY EFFICIENT SERVICE...
Sotras is well established in the filtration industry as one of the leaders
in its field, offering a wide range of standard, high quality products as
well as customised products designed to satisfy specific needs and
requirements thanks to the support of our technical department.
Evidence of the high quality of our products lies in the fact that Sotras
has been cooperating with compressor manufacturers for a long time
and on a regular basis, providing expertise and technical solutions,
developing new products with OEMs, as well as providing assistance
to the numerous small, medium and large firms which are all part of
the wide network of Sotras’ customers all over the world.
This manual presents our standard product specifications
regarding Sotras business units:
Filters and products for compressors
Filters and products for vacuum pumps
Compressed air filter and accessories
and integrates Sotras’ new Customer Service Support Department,which
guarantees a specific and prompt service to customers around the globe.
Sotras help line 0039.011.262.22.22
E-mail: customer.service@sotras.com
or sales@sotras.com
www.sotras.com
EXIT BORGARO
EXIT CASELLE
VILLARETTO
MILANO / AOSTA
TORINO
SAVONA
FREJUS
SOTRAS
CASELLE
AIRPORT
SOTRAS
ORBASSANO
SAVONA
PIACENZA
CASELLE
AOSTA
MILANO
VILLARETTO
BORGARO
TORINO
SOTRAS
SOTRAS
BORGARO TORINESE
TORINO
MILANO
ROMA
SOTRAS
4
FILTERS AND PRODUCTS FOR COMPRESSORS
AIR-OIL SEPARATORS
FILTER HEADS & ADAPTERS
AIR FILTERS
SPIN-ON OIL FILTERS
FILTERS AND PRODUCTS FOR VACUUM PUMPS
DEMISTERS
VACUUM AIR FILTERS
SPIN-ON OIL FILTERS
FILTERS AND PRODUCTS FOR COMPRESSED AIR
COMPRESSED AIR FILTERS
ACCESSORIES
PRATICAL ADVICE
PREMATURE INCREASE IN PRESSURE DIFFERENTIAL
EXCESSIVE USE OF OIL
COLLAPSED SEPARATOR CAUSES
FLASH FIRES
QUALITY CONTROLAND GUARANTEE
QUALITY
GUARANTEE
SOTRAS
5
FILTERS & PRODUCTS
FOR COMPRESSORS
AIR-OIL SEPARATORS
6
During the last century compressed air became associated with many industrial applications and compressor manufacturers
focused their attention on rotary screw and vane compressor whose compression systems use lubricating oil as a coolant.
Hence the necessity of using air/oil separators.
Sotras designs and manufactures separators specifically for installation in rotary screw and rotary vane compressors
and they are available in vertical, horizontal and spin on configurations.
Their purpose is to separate the oil droplets from the compressed air, thereby producing cleaner air and allowing the
oil to be scavenged and re-circulated in the compressor.
Sotras separators are manufactured to satisfy OEM’s needs in terms of:
- Physical principle of air/oil separation
- Element dimensions according to the compressor’s performance and tank dimensions.
- Oil consumption to ensure a correct functional performance
- Use of high grade filtration and separation media to ensure the best quality of clean air needed for industrial applications.
Additionally it is very important to highlight that Sotras separators can be used with all types of oils, whether
standard, mineral based, synthetic or partially synthetic.
In order to decide which is the best separator to be used for a specific compressor, OEMs have to consider what level of
separation needs to be achieved, in other words to target the minimum of parts per million of residual oil content required.
Then a technical solution is needed in order to reduce the oil concentration in the air.
Often OEMs need to consider a pre-separation system, which will reduce the PPM and increase the life of the air/oil separator.
Graph 1
Graph 2
7
SOTRAS
CONSTRUCTION AND SEPARATION:
Corrosive resistant materials are used in the construction of the air/ oil separators. Careful welding procedures and the
use of the latest twin pack adhesive ensure that the element has high mechanical strength and can endure operating
temperature up to 120°C.
Normally, the air and oil mixture passes from the outside to the inside of the separator and the coalescing effect is
carried out through a multi stage separation process resulting in the recovery of the oil and producing clean air.
At a nominal working pressure of 7 bar, the pressure
drop on a new element varies between approximately
0.15 and 0.25 bar.
At other working pressures, the pressure drop is
proportional to the air velocity across the separator
(graph 2)
By using our separators, the oil carryover
after separation is limited to about 1 to 3 ppm.
The life of the separator depends on many
PRESSURE DROP - EFFICIENCY AND PERFORMANCE
Type Pressure drop at General specifications
nominal flow rate (bar)
single wrapped 0,16 low production costs, good performance and long life span
double wrapped 0,18 excellent performance on small dimensions or long life span
pleated 0,15 low pressure drop
pleated+wrapped 0,17 low pressure drop and excellent separation levels
with pre-separation fleece 0,2 for applications showing high oil percentage before
separation or under particular environmental conditions
spin on 0,25 for easy maintenance and small flow rates
factors: the designs and regular maintenance of the
compressor, clean environment, working temperature,
quality of the air and oil filters.
To ensure maximum separator efficiency, the joints
must create a perfect seal. Experience has shown that
through correct installation and also using
the correct type of oil, Sotras separators
can have a life expectancy of many
thousands of hours.
STANDARD SEPARATORS
8
DF 5010
DB 2001
DB 2002
DF 5005
DF 5006
DB 2003
DB 2006
DB 2057
DF 5009
DB 2009
DB 2074
DB 2085
DF 5004
DB 2021
DB 2012
DB 2160
DB 2186
DB 2022
DB 2018
DB 2105
DB 2319
DB 2132
DB 2020
DB 2024
DB 2104
DB 2026
DB 2027
DB 2118
DB 2130
DB 2029
DB 2353
DB 2030
DB 2082
DB 2025
DB 2138
DB 2051
DB 2102
DB 2055
DB 2061
DB 2124
DB 2084
DB 2089
DB 2147
DB 2090
DB 2382
DB 2167
DB 2126
DB 2129
1
1,5
2
2
3
3,5
3,5
3,5
4
4,5
4,5
5
5,5
6,5
7
7
7
8
8,5
9
9
9,5
12
12
12
12,5
14
16
16,5
17
18
19
19,5
20
20
21,5
22
23,5
23,5
25
25,5
28
29
34,5
39
40
43
44
ext
int
int
ext
ext
int
int
int
ext
int
int
int
ext
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
6
1
1
6
6
1
1
2
6
1
2
2
6
1
1
3
2
1
1
2
4
2
1
1
2
1
1
2
2
1
5
1
1
1
2
1
2
1
1
2
2
2
1
2
5
2
2
1
76
135
135
96
136
135
170
135
108
170
135
170
136
275
170
170
170
275
220
220
220
170
220
275
220
300
300
220
300
300
300
300
400
275
275
300
300
300
400
220
275
300
300
300
393
300
400
475
M22X1,5
88
88
M24X1,5
M39X1,5
88
122
75
M32X1,5
122
75
108
M39X1,5
219
122
108
108
219
165
157
157
108
165
219
157
243
243
157
219
243
219
243
314
219
210
243
219
243
314
157
210
219
243
219
304
219
314
398
62
165
170
62
99
170
200
170
93
200
170
200
99
328
200
200
200
328
273
273
273
200
273
324
273
348
355
288
345
355
343
355
439
324
325
348
350
355
439
273
325
355
355
355
439
355
439
740
123
140
200
210
177
305
230
160
260
305
200
180
303
250
435
230
230
305
430
230
230
305
600
448
305
445
500
400
305
600
314
660
520
750
400
750
400
820
620
612
500
500
1000
600
510
700
600
900
0
12
12
0
0
12
12
0
0
12
0
0
0
0
12
0
0
12
12
0
0
0
12
12
0
12
12
0
0
12
0
12
0
12
0
12
0
12
0
0
0
0
12
0
5
0
0
19
SOTRAS Ref. Nominal flow rate (m3/min) Type Drawing d1 (mm) d2 (mm) d4 (mm) h1 (mm) h2 (mm)
The table shows some of Sotras standard separators; special types are available on request.
The data is indicative and based on 7 bar working pressure
9
SOTRAS
(DRAW. 3)
DOUBLE WRAPPED
+ FLEECE
(DRAW. 1)
SINGLE
WRAPPED
(DRAW. 2)
DOUBLE
WRAPPED
(DRAW. 4)
PLEATED
(DRAW. 5)
PLEATED
+ WRAPPED
(DRAW. 6)
SPIN-ON
TYPES AND DRAWINGS
int. ext.
FILTER HEADS & ADAPTERS
10
NP 0001
NP 0002
NP 0003
NP 0004
M22X1,5
M24X1,5
M32X1,5
M39X1,5
19,2
19,8
28,1
35,8
14
15
22
30
12
13
19
26,5
M 27X1,5
M27X1,5
1''-1/4 G
1''-1/4 G
16
16
20
20
32
32
41
41
18
18
18
18
5
5
5
5
SOTRAS Ref. h4 (mm)
115
195
137
155
h5 (mm)
32
32
50
50
S
DF 5010
DF 5005
DF 5009
DF 5004
DF 5006
Corresp.
d1 d2 (mm) d3 (mm) d4 (mm) d5 h1 (mm) h2 (mm) h3 (mm) separator
For OEMs that use spin on separators but do not make filter heads and adapters in house, we are able to offer
different options.
Besides simple separator heads, SOTRAS is also able to provide models with integrated connectors for oil cartridges.
Depending on the OEM’ s requirements it is possible to order the filter head alone or together with the relevant
elements - separator and oil filter.
On request, we provide information regarding heads with thermostatic valves, minimum pressure valves and visual
oil indicators.
AIR-FILTERS
11
Besides being able to provide a wide range of adaptable air cartridges, SOTRAS can offer OEMs a series of air
filters that do not require a housing. These filters are recommended for 1 to 12 m3/min flow rates and can be
installed vertically or horizontally.
This type of solution offers a low pressure drop and very simple installation and replacement procedures.
(On specific requests we can offer fibreglass or oiled cellulose filtering media).
12
SA 6663
SA 6972
SA 6620
SA 6696
SA 6905
SA 6718
110
110
130
164
164
230
218
51
41
76
76
60
100
78
93
93
125
135
135
116
282
25
25
25
25
25
35
35
1
1
2
4
4
6
12
SOTRAS Ref. d1 (mm) d4 (mm) h1 (mm) h2 (mm) Nominal flow rate (m3/min)
SPIN-ON OIL FILTERS
13
Thanks to its experience in the hydraulic sector, SOTRAS has developed a range of oil filters, especially suitable for
screw and vane compressor applications, “bearing in mind„ that these filters will have to endure sudden changes and
extreme limits in pressure and temperature. The oil filters that SOTRAS offers are usually of the spin-on type and
can be provided with a by pass valve, if it is not already to be found on the heads or in the lubrication circuit.
Generally the most commonly used filtering media is made of cellulose, however fibreglass and metallic mesh
versions are available on request.
Every batch undergoes stringent laboratory performance tests in terms of resistance to cyclic and maximum working pressure.
SH 8118
SH 8196
SH 8113
SH 8152
SH 8153
SH 8112
SH 8119
SH 8154
SH 8155
SH 8143
SH 8146
SH 8130
SH 8147
SH 8149
SH 8107
SH 8110
SH 8150
SH 8144
SH 8114
SH 8108
SH 8145
SH 8109
76
93
76
76
93
93
93
93
93
96
93
96
93
108
93
93
93
127
136
108
127
136
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
98
99
93
98
100
3/4'' 16-UNF
3/4'' 16-UNF
3/4'' 16-UNF
3/4'' 16-UNF
3/4'' 16-UNF
3/4'' 16-UNF
1'' 12-UNF
3/4'' 16-UNF
1'' 12-UNF
3/4'' G
1'' 12-UNF
3/4'' G
1'' 12-UNF
1'' 12-UNF
1'' 12-UNF
1'' 12-UNF
M 20x1,5
1'' 1/4 G
1'' 1/2 16-UN
1'' 1/8 -16 UN
1'' 1/4 G
1'' 1/2 16-UN
95
58
125
140
97
143
143
144
172
146
170
193
210
210
210
212
212
182
177
260
228
302
0,12
0,12
0,12
-
-
0,12
0,12
-
-
-
0,12
-
0,12
0,12
-
-
-
-
-
0,12
-
-
2,5
0,8
2,5
3,5
2,5
2,5
2,5
2,5
2,5
-
2,5
-
2,5
1,2
2,5
2,5
2,5
-
-
2,5
-
2,5
15
15
20
20
25
40
40
40
40
40
45
55
70
70
70
70
70
80
95
100
150
180
SOTRAS Ref.
14
14
14
35
25
14
14
25
25
14
14
14
14
14
14
25
30
14
20
14
12
20
by pass
Valve (bar)
Non-return
d1 (mm) d2 (mm) d3 h1 (mm) Valve-(bar)
Nominal
flow rate
(l/min)
Max.
operating
Pressure(bar)
FILTERS & PRODUCTS
FOR VACUUM PUMPS
14
SOTRAS
DEMISTERS
15
The media used in our separators enables us to obtain
excellent air/oil separation rates up to 1-3 mg/m3.
All oil separators are manufactured using materials to
withstand high pressures and temperatures and to minimise
moisture induced deterioration.
In order to achieve the best possible separation efficiency and
long working life of the element it is essential that regular
maintenance procedures are followed and joints are applied
correctly, as well as the use of good quality air and oil filters.
DA 1050
DA 1051
DA 1022
DA 1060
DA 1120
DA 1013
DA 1014
DA 1111
DA 1015
DA 1047
DA 1020
DA 1048
DA 1030
DA 1049
54,5
71,5
79,5
72
79
70
70
72
70
72
106
72
106
72
68
74
117,5
132
144
175
200
200
255
250
218
375
284
500
25,5
32,5
45
35
46
40
40
35
40
35
72
35
72
35
2,5
2,5
3,5
8
0
0
0
8
0
8
0
8
0
8
1
1
1
2
3
3
3
2
3
2
3
2
3
2
0,25
0,4
0,7
0,8
0,9
0,9
1,1
1,2
1,4
1,5
2,2
2,2
2,8
2,9
SOTRAS Ref. Flow rate
d1 (mm) d2 (mm) h1 (mm) h2 (mm) Drawing (m3/min)
DRAW. 3 DRAW. 1
DRAW. 2
VACUUM AIR FILTERS
16
Sotras offers a wide range of filters to suit most requirements in this field and the elements are usually
interchangeable with those produced by other leading manufacturers.
Steel housings are treated with a special protective coating thereby guaranteeing a longer durability. They also undergo
thorough tests to ensure the seals withstand high vacuum levels.
The elements have high dust retention and are available with paper media (having a normal filtration rate of 5
microns) as well as glassfibre media for special applications.
17
SA 6654
SA 6058
SA 6647
SA 6952
SA 6059
SA 6819
SA 6061
SA 6635
SA 6820
SA 6821
SA 6648
SA 6822
SA 6649
SA 6823
SA 6060
SA 6824
SA 6650
SA 6652
SA 6825
SA 6749
SA 6750
SA 6715
SA 6091
SA 6091
SA 6120
SA 6120
SA 6120
SA 6122
SA 6122
SA 6122
SA 6122
SA 6651
SA 6651
SA 6096
SA 6096
SA 6096
SA 6096
SA 6095
SA 6095
SA 6095
SA 6005
SA 6025
G 3/8''
G 3/4''
G 1/2''
G 1''
G 1''1/4
1''1/4 NPT
G 1''1/4
G 1''1/4
1''1/4 NPT
1''1/2 NPT
G 1''1/2
1''1/2 NPT
G 2''
2'' NPT
G 2''1/2
2''1/2 NPT
G 3''
G 4''
4'' NPT
G 3''
G 4''
80
110
110
133
133
133
170
170
170
170
170
170
200
200
200
200
270
270
270
280
360
F
F
F
F
F
F
F
M
F
F
F
F
F
F
F
F
F
F
F
F
F
66
76
76
85
85
85
141
141
141
141
170
170
240
240
240
240
180
180
180
395
590
12
14
14
17
17
17
17
17
17
17
18
18
18
18
18
18
50
50
50
50
50
39
53
53
53
53
53
93
93
93
93
124
124
124
124
124
124
145
145
145
330
400
SOTRAS Ref. Element
h3 (mm) Ref.
45
54
54
78
78
78
96
96
96
96
100
100
114
114
114
114
165
165
165
190
230
h4 (mm)
24
42
42
85
96
96
108
108
108
108
192
192
310
310
360
360
550
720
720
1080
1260
flow rate
MALE- d2 (mm) h1 (mm) h2 (mm) (m3/h)
d1 FEMALE
The oil filters that Sotras offers for vacuum pumps applications have the same characteristics as the products used
for compressors
( See pag. 13 )
SPIN ON OIL FILTERS
FILTERS & PRODUCTS
FOR COMPRESSED AIR
18
SOTRAS
19
SM 9001
SM 9002
SM 9003
SM 9004
SM 9005
SM 9006
SM 9007
SM 9008
SM 9009
SM 9010
60
78
120
198
335
510
780
1000
1500
2760
87
87
87
130
130
130
130
164
164
250
3/8"
1/2"
3/4"
1"
1"
1 1/2"
1 1/2"
2"
2"
3"
21
21
21
43
43
43
43
48
48
74
209
209
279
315
415
515
715
823
1073
1202
75
75
160
135
235
335
525
520
770
780
16
16
16
16
16
16
16
16
16
12
SOTRAS Ref. H3 (mm) Max operating
Capacity Connections D1 (mm) H1 (mm) H2 (mm) pressure (bar)
(m3/h at 7 bar)
COMPRESSED AIR FILTERS
Due to the continuous demand of users of compressed air for clean, high quality air, Sotras offers a range of coalescing
filters specifically designed to suit most requirements. Our established experience enables us to offer simple,
efficient and high quality products at competitive prices. There are four series of elements available for various types
of applications, depending on the level of filtration required. ( See pag. 20 )
SM 9001
SM 9002
SM 9003
SM 9004
SM 9005
SM 9006
SM 9007
SM 9008
SM 9009
SM 9010
SM 9017
SM 9021
SM 9025
SM 9029
SM 9033
SM 9037
SM 9041
SM 9045
SM 9049
SM 9053
SM 9019
SM 9023
SM 9027
SM 9031
SM 9035
SM 9039
SM 9043
SM 9047
SM 9051
SM 9055
SM 9018
SM 9022
SM 9026
SM 9030
SM 9034
SM 9038
SM 9042
SM 9046
SM 9050
SM 9054
SM 9020
SM 9024
SM 9028
SM 9032
SM 9036
SM 9040
SM 9044
SM 9048
SM 9052
SM 9056
SOTRAS Ref.
FILTER
HOUSING FILTER ELEMENTS
ACT.CARB.
(series 4)
MICROFILTER
(series 3)
FINE FILTER
(series 2)
PREFILTER
(series 1)
1
2
3
4
3
0,1
0,01
0,01
0,03
0,05
0,06
0,12
-
0,5
0,01
0,005
SERIES
NOMINAL
INITIAL
PRESSURE
DROP (bar g)
OIL REMOVAL
DOWN
TO (mg/m3)
PARTICLE
REMOVAL
DOWN TO
(micron)
20
PRE FILTERS
“Series 1”
Coarse filtration and
dust removal
Air flow through filter
element- out to in
ACTIVATED CARBON FILTER
“Series 4”
Oil vapour and odour removal
Particle removal below 0.01
micron.
Maximum residual oil content
down to 0,005 PPM.
Air flow through filter
element-in to out
MICRO FILTERS
“Series 3”
High efficiency
Particle removal down
to 0.01 micron.
Maximum residual oil
content down to 0,01 PPM.
Air flow through filter
element-in to out
FINE FILTERS
“Series 2”
General purpose protection
Particle removal down
to 0,1 micron.
Maximum residual oil
content down to 0,5 PPM.
Air flow through filter
element-in to out.
Sotras also offers a wide range of alternative elements suitable for other makes of housing.
ACCESSORIES
21
Cyclon kits, differential pressure gauges, manual, automatic condense drains and technical specifications are
available for all types.
PRACTICAL ADVICE
22
Premature increase in pressure differential
This usually occurs when compressors work under the following conditions:
a) Air intake filter and oil no longer efficient
b) Unsuitable or heavily contaminated oil
c) Water contamination-recognised by rust deposits in separator tank
To help in avoiding these problems, there should be frequent replacements of the Air and Oil filters and the oil should
be changed completely at regular intervals. Check for deposits of’ varnish’ which can quickly block a separator.
Compressor should not be run at excessively high temperatures.
Excessive use of oil
This normally occurs under the following circumstances:
a) Separator not changed at the appropriate time. If the separator has reached the end of its lifespan or has worked in
arduous conditions and is not replaced, it can suffer structural damage (collapse) or media breakdown causing oil carry-over.
b) Blocked or malfunctioning scavenge tube. This situation increases the level of oil inside the separator and the
amount of oil carry-over. To avoid this problem, the scavenge tube must be checked for correct length at every
separator change and kept free from blockage.
c) Incorrect oil level in tank. Overfilling with oil alters the pre-separation process and increases the quantity of oil in the
air/oil mist thereby reducing the efficiency of the separator. “Foaming” created by the oil can also create this situation.
d) Gaskets applied incorrectly or use of unsuitable or used gaskets. When installing a new separator the incorrect
application of joints (bad seal) can cause heavy movements of oil thereby by-passing the separating system.
e) Inefficient separation system. In some instances, the design of the compressor separation system is inefficient.
In these cases the manufacturers improve the separation efficiency by adding baffles or through modification of
separations by adding pre-separation media to the outside of the element.
Collapsed separator causes
This normally occurs under the following circumstances:
a) Separator excessively contaminated
b) Sudden surges caused by:
- malfunctioning valves
- sudden release of air to atmosphere (mobile compressors)
c) Rotary compressors working in parallel with reciprocating compressors without a suitable air receiver.
Flash fires
These are very rare and are caused by
several factors occurring simultaneously
and not directly related to the Air/Oil
separator.
It is good practice to ensure that the
gaskets have a reliable form of grounding
by the use of suitable materials (at least
one or two metal staples or metal foil)
so that there is contact between the
element and the separator tank.
Our products regularly undergo stringent quality control and only very seldom the malfunctioning of the compressor
has to be ascribed to the filter itself.
Here below are listed some of the most common causes which lead on to an improper functioning of the machine.
23
SOTRAS
QUALITY CONTROL AND GUARANTEE
The efficiency of our separators is tried through Johnson or Balston tests as well as the use of artificial smoke.
All types of filters are passed to our Quality control Department for approval before being marketed and
the performance of every batch in terms of resistance to cyclical and maximum working pressure
regularly undergoes stringent laboratory tests
We would like to emphasise that Sotras filters undergo stringent quality control and are frequently tested in
order to ensure satisfactory operation in the application of which they are designed.
Evidence of the high quality of our products lies in the fact that Sotras manufactures original equipment for some
of the most important compressor manufacturers, to some of which Sotras guarantees product exclusivity.
We guarantee that filters produced by Sotras are free from defects either in materials or construction, always
provided that the machinery is maintained in accordance with manufacturers’ recommendations and filters
are correctly installed and changed.
Sotras will replace any item found to be defective as described above but will not be held
responsible for any other replacement or contingencies or consequential loss.
In addition Sotras manufacturing
quality system has had approved
certification to
UNI EN ISO 9002-94 since 1999.
In year 2003, Sotras has gained
a new certification to
UNI EN ISO 9001-2000.
VIA DONATELLO, 13 - 10071 BORGARO TORINESE (TORINO) - ITALY
TEL. 0039.011.262.22.22 - FAX 0039.011.262.41.41
www.sotras.com
sales@sotras.com
SOTRAS
The data in this brochure are not binding. With a view to continuous product improvement, reserves the right to make changes without prior notice. Rev. 01 - 2004.01.30 Studio GianCravero - Foto Balmas