Hartwig Viet Nam,Hartwig Instrument Viet Nam, Thiết Bị Đo Hartwig, Thăm Dò Nhiệt Hartwig, Thiết Bị Lấy Mẫu Hartwig, Thiết Bị Điện Hartwig Tp7-C, Tl1-A

ANS Việt Nam là đại lý phân phối chính thức và xin hân hạnh cung cấp cho Quý khách hàng sản phẩm:

Carbon steel tapes
mm graduation, each m, dm and cm figured, deep etched markings,
in natural steel colour, on dark etched background. For all-round use.

Stainless steel tapes
mm graduation, each m, dm and cm figured, deep etched markings,
in natural steel colour, on dark etched background. With stainless steel plumb-bob chemical resistant. For corrosive liquids.

Polyamide coated steel tapes
mm graduation, each m, dm and cm figured, steel tapes with phosphate layer and polyamide coating, yellow background, black graduations, black-red figures.
Transparent chemical resistant polyamide coating.
For all-round use, easy to read in the dark.

All tapes are produced with the tension according to the weight of the plumb-bob,
for example: dip-weight 400 gram = tension 4 N.

Windingframes
strong brass frame with wooden handle (chemical safe), long foldable
winding arm which locks into position. Specially designed for tank dipping
tapes. Tape rolls out at the front. Tapes more then 40 metre cross-frame advised

Dip weights
Dip-weight in the form of a rod, terminating in a truncated cone at the lower end.
This cone provides the necessary of ''touch'' in dipping and it penetrates sludge more
easily. A stainless steel tip on the brass dip-weight prevents wear down.
The dip-weight is connected to the tape in a fixed way (by means of a screw).

The graduation in mm. continues on one flat side of the dip-weight, ensuring
there will be no ''blind spot'' where the tape is connected to the weight.

Stainless steel dip-weights are intended to use with stainless steel tapes.
Brass dip weights are to be used with carbon steel and polyamide coated tapes.

Dip weights available in 400 gram for watery like liquids, 700 gram most common one for oils and fats and a 1000 gram dip weight.

Extra
All gauging tapes can be government stamped or calibrated on request, except the detachable dip-weights, they can only be calibrated.
To eliminate hazardous build-up of static electricity, grounded winding frames are available on request

NOTE: tank strapping tapes, ulage tapes, Class II tapes, different dip-weights (floats), special winding-frame, etc. can be supplied, details upon request.

See toplinks for the article numbers and special tapes
Or Bewerkgo to the webshop

Hartwig Instruments supplies a wide range of samplers, bottom samplers, zone samplers and running samplers.
These samplers are manufactured in brass, aluminium and stainless steel.
To guarantee the durability and the resistance to corrosion, the samplers are manufactured by processing two types of low-carbon stainless steel; material number 1.4404 and 1.4571 or 316L and 316Ti

Many samplers are available from stock.

Thermoprobe

Click on an Image for More Information Description

TP7-C

For several years the TP7-C has been our most popular model throughout the world. Because of its durability and convenient cable reel design the TP7-C is highly valued by those users that must rely on their equipment. The TP7-C enclosure is made of high impact plastic which dissipates static electricity and has proven to be unaffected by any petrochemical.

TP9

The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A stainless steel enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids.

TL1-A

The TL1-A is an improved version of the original ThermoProbe model TL1. The TL1-A incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL1-A has accuracy, repeatability and long-term stability.

TL1-W

The TL1-W intrinsically safe thermometer is a modified field version of our successful TL1-A thermometer. It features a rugged frame for reinforcement and is designed for continuous operation, but can be easily powered off if desired.

TL2

The TL2 is a 2-channel precision bench top thermometer offering a higher level of metrology accuracy in a very affordable package. The TL2 is a complete NIST traceable system that is ready to use, right out of the box.

 TL1-R

 The TL1-R thermometer is a compact reference thermometer with accuracy comparable to instrument systems costing twice as much. It has all the features of our standard TL1-A plus a higher level of accuracy

Why ThermoProbes

We can also take care of the calibration of all your instruments.

Hãy liên hệ với chúng tôi để được giá tốt nhất.
[E]: canh.ans@ansvietnam.com
[P]:0938214498
[W]: http://www.ansvietnam.com/ http://www.sieuthithietbitudong.com
www.thietbitudong.com
ANS Vietnam là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :..Balluff Vietnam,Baumer Vietnam,Bei Encoder Vietnam ,Crouzet Vietnam, Kuebler Vietnam , Koganei Vietnam,Celduc Vietnam,Epulse Vietnam,Crydom Vietnam, Raytek Vietnam,Ircon Vietnam ,MTS Vietnam, Kimo Vietnam, Pilz Vietnam, Status Vietnam, newall vietnam, sterilair vietnam, Univer Vietnam,Masibus Vietnam, Elap Vietnam, Setra Vietnam, Suntronix Vietnam, WiseVietnam, TMTeck Vietnam, dakotainstruments Vietnam, FIC Vietnam, elap encoder vietnam, Flowmeters Vietnam, Conch Vietnam, Unipulse vietnam, Tival sensors Vietnam, Divus Vietnam, RKC Instrument Vietnam, Conch Vietnam, Automation, Novotechnik Vietnam, Vaisala Vietnam, Ametek Vietnam Jenco Vietnam, Microdetector Vietnam, MTS Sensor, Balluff sensor, Gems sensor Vietnam, Lion Precision Vietnam, Arkon Vietnam, Microsonic Vietnam,Osukl Vietnam,Proxitron Vietnam,JJ Automation Vietnam,Offshore vietnam Brooks Instrument Vietnam,Sensormation Vietnam, Fraba Vietnam, Posital Vietnam,Bernstein Vietnam, Dwyer Instruments, Dwyer Instruments,univer cylinder vietnam, Banico Controls Vietnam, Hopeway Vietnam, IMR Vietnam, Reloca Comat Vietnam, Metalwork Vietnam,Posital Vietnam, Micro Process Controls, Jelsystem Vietnam, Wise vietnam......