Mx-500N-Imada Vietnam-Ansvietnam
Liên hệ
D3, Mieu Noi Resident Area, Dinh Tien Hoang St., W.3, Binh Thanh Dist., Hcmc, Vietnam
Kindest Regards,
Pham The Hue
I Senior Sales Eng. I
====================
I cellphone I +84 917000655
I email I hue.ans@ansvietnam.com
Online contact===================================
phamgiahuynh hue.ans
3 operation modes:
Single or continuous operation for constant testing conditions
- manual operation: Feed continuous so long as button is pressed or he limit switch is reached
- single cycle operation: The force gauge covers a defined distance for one-time
- continuous cycle operation: Force gauge travels a defined distance continously up and down- Test stand with infinitely adjustable travel speed from 10 to 300 mm/min
- Combination of linear guide and high performance brushless motor provides extremely smooth operation also under heavy load
- 2 manual adjustable limit switches for inversion of the direction
- High speed for returning to starting position
- Gauge overload protection in combination with force gauge Z2, ZP or display unit FA Plus only (additional connecting cable is necessary)
- Travel distance 270 mm
- Test stand for the following force gauge up to 500 N:
- mechanical - model PS and FB
- electronic (recommended) - model DS2, Z2 und ZP
top- Large baseplate to take up a lot of clamps and testing devices
- Delivery of the test stand includes mounting screws for the force gauge
- Force gauge is not included
| Model | Capacity | Description |
| MX-500N | 500 N | for single and continuous cycle mode |
| MX-500N-S | 500 N | with distance measuring system (Mitutoyo) |
| MX-500N-E | 500 N | with distance and speed measuring system |
| MX-500N-L550 | 250 N | with extended stroke |
| MX-500N-WF | 100 N | travel speed 40 - 1200 mm/min |
| MX-500N-F | 250 N | travel speed 20 - 600 mm/min |
| MX-500N-O | 500 N | travel speed 2 - 60 mm/min |
 | Clamping Tools Depending on the application we have a lot of clamping tools and clamps in our programm. |
 | Connecting Cable for test stand with force gauge (Series Z) to stop feed at Fmax or overload (force control). Order number: CB-501 |
 | Connecting Cable for test stand with force gauge (Series Z) to stop feed at Fmax or overload (force control) and output signal RS 232 Order number: CB-504 |
 | Distance Measuring System For exact determination of the travel distance Click picture for more information |
 | Distance and speed measuring system For exact determination of travel speed and distance Click picture for more information |
Test stand without force gauge, mounting screws, mounting plate, operating instructions in english only.
| Capacity: | Max. 500 N |
| Travel distance: | 270 mm (Standard) |
| Stroke with force gauge ZP/Z2: | max. 235 mm (Standard) |
| Travel speed: | 10 - 300 mm/min, infinitely adjustable (Standard) |
| Overload protect: | Automatic stop in combination with models Z2 and ZP when overload or max. limits are reached |
| Dimensions: | 214 x 428x 573 mm (LxWxH) |
| Weight, net (gross): | Approx: 18 kg (21kg) |
HẾT HẠN
0917 000 655
| Mã số : | 7414977 |
| Địa điểm : | Hồ Chí Minh |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 05/05/2013 |
| Loại tin : | Thường |
Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!
Gợi ý cho bạn
Bình luận