The expense of power consumption is usually counted by the generator according to its contracted capacity. Once the power demand is higher than the contracted capacity, two times of overload fine will be counted when within 10% of ultra power consumption, and three tims of overload fine will be counted when above 10% of ultra power consumption.
．The main purpose of demand-control is to restrict the total amount for power demand. When the total power demand is higher than the contraced capacity, to lessen the power consumption, parts of facilities could be shut down or keep them operating with low power loading so as to prevent any penalty on ultra power consumption and to decrease the expense. |
 |
| ．Centralized Control | Integrating all of electric analysis management and substation system into a software. |
| ．Remote Monitoring |
Multi-level framework to communicate with Ethernet and RS485 Modbus-RTU. |
．Multi-functional
network communication | Able to monitor various of digital power meters. |
．Multi-channel
Connection | According to the quantity of power meter, users can add multi-network frame; the system will fetch the devices data by executing Multi Thread to increase the speed of data acquisition. |
．Open Communication
Format | Adopting open communication format Modbus-RTU framework to communicate with down levels. |
．Promptly Monitor and
Control | Adopting software regularly detecting , the system can instantly monitor and control the operation status of every facility. |
| ．Historical Record | To sum up the historical record by grouping-level, users can learn the record of each group and device , and can use instant chart to identify the statistic data of every interval, and to display the power consumption of groups and devices. |
| ．Data Analysis | By electric analysis for single group or facility to know the condition of power consumption. |
| ．Group Management | (1)According to power meter distribution, users are able to build the groups and their associated graph.
(2)According to its own grouping and devices, the power consumption for the groups will be accumulation.
(3)Perfect elasticity, instant modification, counting and sum up. |
| ．Data Comparison | By comparing the parameter for groups or facilities, users can learn if there''s any abnormal condition on higher or lower power consumption; users can compare with different devices through their setting and learn its details from the report. |
Bình luận