Kimo Vietnam Ate 300 - Att 300 - Ds 200 -Ds 300 - Airflow Cone F, Airflow Cone For Vane 100 Mmm F,Dbm 610 A

Mutli-channel displayer

Flush-mount multi-channel display Alternating display of 1 to 3 parameters.

ATE 300 can display 3 parameters (for example humidity, temperature and pressure). Can be installed flush-mounted or wall-mounted. 

• Power supply : 24 Vac/Vdc ±10%
• Analog inputs : 3 x 4-20 mA or 3 x 0-10 V
• 1 RS 232 digital input KIMO external transmitter (classe 200 & 300)
• 1 RS 485 digital input/output (Modbus protocol integrated)
• 22 pre-set units and 3 configurable units
• Configuration via software or remote control
• Electroluminescent front display, made of brushed stainless steel or white lacquered

Multi-channel displayer

The ATT is a multichannel indicator with a large light-emitting display for an easier reading at several meters distance. Alternating display of 1 to 3 parameters Large display (50 x 190 mm) Multi-directional housing, made of ABS.

ATT 300 can work with any current or voltage input of any transmitter : pressure, humidity, temperature, airflow, air velocity... 

• Power supply : 24 Vac/Vdc ±10% or 230 Vac ±10%, 50-60Hz
• 3 analogue imputs : 3 x 4-20 mA or 3 x 0-10 V
• 1 RS 232 digital input for KIMO external transmitter (Class 200 and 300)
• 1 RS 485 digital input/output (MODBUS protocol integrated)
• 22 pre-set units and 3 configurable units
• Configuration via software or remote control Housing : IP 63

Noise dosimeter

For the measurement of noise exposure at workstation.

• Sound pressure level: LAF - LAS - max-min
• Equivalent continuous level: LAeq - LCeq - max-min
• Peak pressure level: LCpk - LZpk
• Detection and peak counting: 135 dB - 137 dB - 140 dB
• Daily sound exposure level: Lex,d
• Sound exposure: EA
• DOSE

Noise dosimeter

Individual noise dosimeter with two-channel measurement.

• Only one dynamic range extended from 100 dB : 40-140 dB
• Conventionnal and integrating-averaging sound level meter mode
• Two-channel measurement
• Audio-recording on exceeding thresholds, peaks or short LAeq

• Sound pressure level: LAF – LAS – max-min
• Equivalent continuous level: LAeq – LCeq – LXeq - octave bands 63 Hz/8 kHz
• Detection and peak counting: 135dB – 137dB – 140dB
• Daily sound exposure level: Lex,d
• Sound exposure: EA,T : in Pa²h
• DOSE

For hotwire anemometer

Hotwire anemometer cones : Cone K35 : 10 à 400 m³/h - 200 x 200 x 300 mm Cone K75 : 30 à 750 m³/h - 300 x 300 x 470 mm.

These instruments can be associated with the hot wire and vane Ø100 mm anemometers from Class 100, 200 and 300 portable instruments.

For vane anemometer

Air flow cone for diameter 100mm vane probe.

Airflow meter

    

A solution for airflow commissioning and balancing.

To check air volume of your diffusers and grilles.

• Measuring range: from 40 to 3500m³/h or from 24 to 2060 cfm
• Quick and simple hood changes
• Simultaneous display of airflow and temperature
• Automatic detection of airflow direction (supply and exhaust)
• Thermo-anemo-manometer functions