Kyoritsu 6310 - Thiết Bị Phân Tích Công Suất Đa Năng Kyoritsu 6310 - K6310

Liên hệ

104 K18 Đường Nguyễn Hiền Khu Ttđh Bách Khoa -Hbt- Hn


Power Quality Analyzer

 

KEW6310
 
 
 



Can measure Flicker in accordance to IEC 61000-4-15 and EN50160 standards. Using our Flicker sensor, available as optional accessory, Pst value (short term severity in 10 minutes value) and the Plt value (long term severity in 2 hours value) can be measured.
12 kinds of Power Measurements for Power Control and Applicable to Power Quality Control including Harmonics Analysis.
One click easy-to-use operation helps complicated setting and processing of large data through the setting / analyzing software provided as accessory.
Direct communication with PC via USB cable



6310
CE


Built-in Input / Output Function of external signal enables the signal transmission to alarms.
2-way power supply by AC and Battery, and Nickel hydrogen battery usable with rechargeable function.
Pull / Insert of CF card possible whenever on recording under the function of memory backup device.
Can monitor insulation at leakage current by using optional leak clamp sensors.
Built-in Print Screen Function enables to record display screen
(Records 512 screens by using CF card: 1 screen 40KB).
Can display Waveform and Vector, and can confirm the wiring connection, too.
Complies fully with International Safety Standards IEC 61010-1 CAT.III 600V.



* Attention for KEW6310 customers:
Flicker measurements are possible with firmware of KEW6310 upgrade (Ver.2.01), PC software PQA Master upgrade (Ver. 2.01) and an optional accessory Flicker sensor KEW8325F.


TRUE RMS
 

Wiring connections1P 2W, 1P 3W, 3P 3W, 3P 4W
Measurements and parametersVoltage, Current, Frequency, Active power, Reactive power,
Apparent power, Active energy, Reactive energy, Apparent energy,
Power factor (cos θ), Neutral current, Demand, Harmonics,
Quality (Swell/Dip/Instantaneous Stop, Transients/Over Voltage, Inrush Current, Unbalance Rate, IEC Flicker [Pst(1 min)*, Pst, Plt]), Phase Advance Condenser

(*Pst can be shown in details for 1 minute intervals.)
Other functionsDigital output function, External communication function,
Scaling function
Voltage :
Ranges [RMS]150 / 300 / 600 /1000V (CF: 2.5 or less, 100% or less of each range)
Allowable input10~110% of each range (1000V range : 20%~)
Display ranges5~120% of each range
Accuracy
|±0.3%rdg±0.2%f.s. (sine wave, 45~65Hz)
Current :
Ranges [RMS]

8128 (50A type ):1 / 5 / 10 / 20 / 50A
8127 (100A type ):10 / 20 / 50 / 100A
8126 (200A type ):20 / 50 / 100 / 200A
8125 (500A type ):50 / 100 / 200 / 500A
8124 (1000A type ):100 / 200 / 500 / 1000A
8129 (3000A type ):300 / 1000 / 3000A
(CF:3.0 or less. 90% or less of each range)
Allowable input10~110% of each range
Display ranges1~120% of each range
Accuracy
|±0.3%rdg±0.2%f.s. + Accuracy of Clamp sensor
(sine wave, 45~65Hz)
Activa power accuracy
|±0.3%rdg±0.2%f.s. + Accuracy of Clamp sensor
(Power factor 1, Sine wave, 45~65Hz)
Influence of power factor
|±1.0%rdg (reading at power factor 0.5 against power factor 1)
Frequency meter range40~70Hz
Internal memory

1.8MB  
Measurement file (CSV):256kB×6 blocks (=1.536MB)
Screen file (BMP):32kB×7 blocks (=0.224MB)
Configuration file (KAS):32kB
Display

Bình luận

HẾT HẠN

0466 844 622
Mã số : 4371125
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 14/03/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn