At937 Atten Soldering Station Máy Hàn Thiếc Mini Dùng Cho Sửa Chữa

Máy hàn thiếc AT937

Tính năng :

Dải nhiệt:

200–480°C

ATTEN AT937 Solder station

This compact but 50W-powerful stationary soldering iron is a great entry-level soldering station, and we''ve been using it around Vietnam for soldering with a lot of success. It''s not much more expensive than Atten SA-50 ''all in one" irons, but comes with a separate power supply and pen. Heats up fast and solders both lead and lead-free solder like a champ!

The powering station is equipped with a temperature control knob lock. After setting the desired temperature, tighten the hex nut on the underside of the knob mount using the supplied hex wrench. Turn the nut clockwise to tighten the knob lock. The heater light blinks on and off when the iron tip reaches the set temperature.

The Atten AT937 is an MCU controlled EMC safe solder staion.

• Power Voltage: 220V AC / 60Hz
• Power Consumption: 50W
• On/Off switch on side of unit
• Temperature Range: 200 ~ 480°C (Rapid heating-up; Unique temp. locks setting to avoid adjusting temp.)
• Temperature stability: 2°C (in stil air, no load)
• Tip Leakage Voltage: < 2mV
• Heating element: 50W four-core stainless steel heater
• Standard Tip: 900M
• Additional range of soldering tips are available
• Length (iron only): ~225mm / ~8.8"
• Weight (iron only): ~52g
• Dimensions (power station only): ~6.5" x 4.5" x 3.5"
• Net Weight: 1.6kgs (G.W: 1.78kgs; 12pcs/ Carton = G.W 21.4kgs = 550x480x505mm = N.W 19.2kgs)
• Includes soldering iron, stand, and sponge

Includes:

• Station/receptacle
• Soldering iron (ATTEN 907)
• ATTEN iron holder with cleaning sponge
• Instruction manual