Âm Ly Denon Pma-S1 Hàng Chọn Bộ Có 1 Không 2 Tại Hà Nội

28 triệu

69 Bạch Mai, Hai Bà Trưng


It is the Integrated Amplifier which inherited the thought of POA-S1.

The large current type magnification element UHC MOS is adopted as a magnification element.
Current supply capability is improved a bipolar transistor and more than equivalent, and UHC MOS serves as an element which the sound quality merit of MOS FET also has.
Furthermore, in order to pull out the capability of this element to the maximum extent, the cascode bootstrap system is adopted,Ideal load to the electric power magnification stage was realized, simple and straight composition is realized, and the sauce resistance which was the cause which soils sound quality is also eliminated taking advantage of the stability of UHC MOS.

Since the Oide power is acquired with low power supply voltage by adoption of a BTL circuit, adoption of the device excellent in sound is possible.
Moreover, full separation of the ground circuit and speaker output current used as a standard of operation was carried out, and more nearly quality sound quality is realized.

excelling in a chassis at the damped-oscillation characteristic -- electromagnetism -- the "sand casting" of the nonmagnetic material in which highly precise processing which distortion does not generate easily is possible is adopted. Furthermore, by unifying a chassis and a radiator, the thorough high rigidity and absent-resonance-izing are realized.
Moreover, it is fixing to a sand casting chassis directly, and the core of a transformer and the sintered alloy insulator are also pursuing to the limit of vibrationproofing structure.

The newly developed NEW inverted sigma balance circuit corresponding to both the inputs of a balance input and a normal input is carried, the individual conversion circuit in an input stage and a voltage magnification stage is made unnecessary, and it has become the balance direct design which can do an input for the balance power amplifier of BTL composition direct.

Equalizer amplifier has adopted the exclusive constant-voltage power source of two-step composition.
Since a circuit and a power source can be completely intercepted by turning OFF an EQ Power switch when not using a Phono input, the influence of the sound quality on line-in, such as CD, is cancelable.

Since simple & straight-ization of a signal course is put into practice, a pre out, a main in terminal, tone control, a filter, a loudness, muting, and a headphone jack are not carried.



Rear
Internal

UHC-MOS
Sand

 



Rating of a mode


Form Integrated Amplifier
<Power amplifier part>
Output power 100W+100W (4 ohms, 1kHz)
50W+50W (8 ohms, 20Hz - 20kHz)
THD 0.007% (1kHz, 25W, 8ohm)
Output bandwidth 5Hz - 50kHz (Outputs 25W and 8ohm, THD 0.1%)
Output load impedance 0.1ohm or less
Speaker output terminal 4ohm-16ohm
<Preamplifier part>
Input sensitivity/impedance Phono MM: 2.5mV/47kohm
Line: 150mV/47kohm
Balanced: 150mV/100kohm
Maximum permissible input voltage Phono MM:150mV(0.1%
Output power Rec Out:150mV/1kHz
equalizer (RIAA deflection) 20Hz-20kHz±0.3dB
THD 0.002% (1kHz, 5V)
<Synthesis>
Signal to noise ratio Phono MM: 91dB (5mV of input o''clock)
Line:108dB
Power supply voltage AC100V, 50Hz/60Hz
Power consumption 230W
Dimensions Width 434x height 155x depth of 493mm
Weight 25.5kg

Bình luận

HẾT HẠN

0439 393 498
Mã số : 12000245
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 30/12/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn