Lidinco là đại lý phân phối tại Việt Nam sản phẩm Máy hàn cáp quang của hãng iLsintech Hàn Quốc, với thời gian nhanh và giá cả cạnh tranh.
- Máy hàn cáp quang Hãng iLsintech Hàn Quốc với chất lượng tốt và giá thành tốt nên rất được ưa chuộng hiện nay. Các sản phẩm bán chạy nhất hiện tại như Swift K7, Swift K11, Swift K9, Swift S5, Swift KF4, Swift KR7…
- Giá Tốt Nhất
- Có sẵn linh phụ kiện thay thế
Liên hệ với chúng tôi để được tư vấn và nhận báo giá tốt nhất:
Lidinco đảm bảo sẽ làm hài lòng quý khách
Chúng tôi còn phân phối các máy hàn cáp quang Nhật Bản, Trung Quốc.
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM, Việt Nam
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com"
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM, Việt Nam
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com"
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM, Việt Nam
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM,
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com"
LIDINCO
TEST AND MEASUREMENT EQUIPMENTS
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM, Việt Nam
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com"
LIDINCO
TEST AND MEASUREMENT EQUIPMENTS
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM, Việt Nam
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com"
LIDINCO
TEST AND MEASUREMENT EQUIPMENTS
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM, Việt Nam
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com"
LIDINCO
TEST AND MEASUREMENT EQUIPMENTS
Address: 14 Thiên Phước, Phường 9, Quận Tân Bình, Tp.HCM, Việt Nam
Phone: +84 8 3977 8269 / +84 8 3601 6797 – Fax: +84 8 3977 8019
Email: sales@lidinco.com – – – Skype: Lidinco
Website: www. lidinco.com
Giới thiệu thông số kỹ thuật của một số máy tiêu biểu.
1. Máy hàn sợi quang Ilsintech Swift F3, Clad to Clad
Thông số kỹ thuật:
Category | Description |
Fiber alignment | Fixed V-Groove(Clad to Clad) |
Applicable type of fibers |
0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable |
Fiber count | Single fiber |
Applicable fiber dimensions | Cladding diameter: 125㎛ / Coating diameter: 250, 900㎛ |
Fiber setting and cleaved length | 8.0mm |
Splicing modes | Splice mode: 100, Heater mode:50 |
Typical Splice Loss | SM: 0.03dB, MM: 0.02dB, DS: 0.06dB, NZDS: 0.06dB |
Return loss | > 60dB |
Splicing Time | Typical 7sec (Standard SM, SM-SM mode) |
Splice loss estimate | Available |
Sleeve heating time | 20sec(0.9mm fiber), 70sec(Indoor, 3.0mm cable), 80sec(connector) |
Applicable protection sleeve | 40mm,60mm(fiber), 28 or 32mm(connector) |
Storage of splice result | The last 2,000 results to be stored in the internal memory. |
Tension test |
1.96N |
Operating condition |
Altitude: 5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,
Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
Storage condition |
Temperature: -40℃~80℃, Humidity: 0~95% |
Dimension |
142(W)x183(L)x86(H)mm(Including rubber) |
Weight | 0.9kg(Including battery 1.2kg) |
Viewing method and display | Two CMOS cameras and 3.5-inch color LCD monitor |
Fiber view and magnification | X/Y : 170X/190X |
Power supply | DC Lithium polymer battery(DC 14.8V, 1650mAh x2), 100 ~ 240V AC Adapter |
No.of splice cycles with battery | Typical 140 cycles |
Electrode life | More than 2,500 times |
Terminals | USB |
2. Máy hàn cáp quang Ilsintech Swift K7, Core to Core
Thông số kỹ thuật:
|
Category | Description | Fiber alignment |
IPAAS core to core alignment(Image pattern analysis alignment system) | Applicable type of fibers |
SM(ITU-T G.652), MM(ITU-T G.651),DS(ITU-T G.653),
NZDS(ITU-T G.655), ITU-T G.657 | Automatic fiber recognition |
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653),
NZDS(ITU-T G.655),SM(ITU-T G.657 A2/B2),SM(ITU-T G.657 B3) | Fiber count |
Single fiber | Applicable fiber dimensions |
Cladding diameter: 80 ~ 150㎛, Coating diameter: 100 ~ 1000㎛ | Fiber setting and cleaved length |
250㎛: 8~16mm | Splicing modes |
Splice mode: 300, Heat mode: 100 | Typical Splice Loss |
SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB | Return Loss |
> 60dB | Splicing Time |
Splice: Typical 6sec(Quick mode) | Splice loss estimate |
Available | Sleeve heating time |
Typical 9sec (IS-45 Sleeve, IS-60 mode)
Typical 13sec (IS-60 Sleeve, IS-60 mode) | Applicable protection sleeve |
40mm, 45mm, 60mm (fiber), 32mm or 28mm (Connector) | Storage of splice result |
The last 10,000 results to be stored in the internal memory.
(Image 10,000 results) | Tension test |
2N / 4.4N(Option) | Operating condition |
Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof | Storage condition |
Temperature: -40℃~80℃, Humidity: 0~95% | Dimension |
142(W) x163(L) x146(H)mm(Including rubber) | Weight |
2.0kg(Including battery 2.5kg) | Viewing method and display |
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen | Fiber view and magnification |
X or Y view : 220X, MAX : 700X | Power supply |
DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter | No. of splice cycles with battery |
300cycle | Electrode life |
More than 3,500 times | Terminals |
USB, RCA, External Power(DC 12V Available for car cigar jack) |
3. Máy hàn cáp quang iLsintech Swift K11 Thông số kỹ thuật SPECIFICATIONS Category | Description | Fiber alignment |
IPAAS core to core alignment(Image pattern analysis alignment system) | Applicable type of fibers |
0.25mm, 0.9mm, 2.0mm, 3.0mm, 4.0, Indoor cable | Fiber count |
Single fiber | Applicable fiber dimensions |
Cladding diameter: 80 ~ 150㎛, Coating diameter: 100㎛~4mm | Fiber setting and cleaved length |
7~16mm | Splicing modes |
Splice mode: 300, Heat mode: 100 | Typical Splice Loss |
SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB | Return Loss |
> 60dB | Splicing Time |
Typical 6sec | Splice loss estimate |
Available | Sleeve heating time |
9sec (IS-45 Sleeve, IS-45 mode), 13sec (IS-60 Sleeve, IS-60 mode) | Applicable protection sleeve |
40mm, 60mm, 32mm or 28mm for SOC | Storage of splice result |
The last 10,000 results to be stored in the internal memory.
(Image 10,000 results) | Tension test |
1.96N ~ 2.25N | Operating condition |
Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof | Storage condition |
Temperature: -40℃~80℃, Humidity: 0~95% | Dimension |
143(W) x 163(L) x 140(H)mm (Without Bumper) | Weight |
With battery 2.25kg | Viewing method and display |
Two CMOS cameras and 5.0-inch color touch LCD | Fiber view and magnification |
X/Y : 200X, Max 400X | Power supply |
DC Lithium polymer battery (DC 14.8V, 4700, 6000mAh-option),
100~240V AC Adapter | No. of splice cycles with battery |
250cycle | Electrode life |
More than 3,500 times | Terminals |
USB, RCA, External Power(DC 12V Available for car cigar jack) |
|
Bình luận