Vali Dụng Cụ Sửa Chữa - Bộ Dụng Cụ Cách Điện 80 Chi Tiết Wiha 32800
Liên hệ
Khu Đô Thị An Phú An Khánh, An Phú, Quận 2, Hồ Chí Minh, Việt Nam
Bộ dụng cụ cách điện 80 chi tiết Wiha 32800
80 Piece Insulated Rolling Tool Case Set includes:
| Long Nose Pliers: | 6.3, 8.0" |
| Bent Nose Pliers: | 6.3" |
| Long Flat Nose Pliers: | 6.3" |
| Combo Pliers / Crimpers: | 9.0" |
| Diagonal Cutters: | 6.3" |
| High Leverage Cutters: | 8.0" |
| Cable Cutters: | 6.3" |
| Stripping Pliers: | 6.3" |
| Adjustable Wrench: | 8.0" |
| Inch Insulated Sockets: | 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8" |
| Metric Insulated Sockets: | 13.0, 14.0, 15.0, 17.0, 19.0, 20.0, 22.0mm |
| Inch Insulated Nutdrivers: | 7/32, 1/4, 5/16, 3/8, 7/16" |
| Metric Insulated Nut Drivers: | 5.0, 5.5, 6.0, 7.0, 8.0, 10.0, 13.0mm |
| Insulated Cable Knife: | 50mm |
| 2 Meter Ruler | Inch / Metric |
| Insulated Ratchet | 3/8" Drive |
| Insulated Extension Bar | 3/8 x 4.9" |
| Single Pole Voltage Detector | |
| Insulated Slotted Drivers: | 2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mm |
| Insulated Phillips Drivers: | #0, #1, #2, #3 |
| Insulated Slt/Ph Terminal Drivers: | #1, #2 |
| Insulated Square Drivers: | #1, #2 |
| Insulated Torx Drivers: | T6, T7, T8, T9, T10, T15, T20, T25, T30 |
| Insulated Inch T-handles: | 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" |
| Insulated Metric T-handles: | 4.0, 5.0, 6.0, 8.0mm |
| Insulated L-Key: | 10mm, 1/2" |
10,000 Volt tested
1,000 Volt rated
Specifications & Standards:
EN/IEC 60900
ASTM F-1505-01
VDE 0682/part 201
DIN 7437
NFPA70E & CSA
Insulated tools are intended to provide protection against accidental contact with charged energized circuits. For maximum safety we recommend de-energizing all circuits whenever possible before starting work on electrical apparatus or conductors. Always visually inspect insulation on tools before use, do not use tools if insulation shows signs of wear or damage to the insulated areas of the tool. Wear appropriate eye protection when using hand tools. Use insulated protective outer wear when appropriate.
Case Measurements: 22" L x 13.75" W x 9" H
Liên hệ ngay: Ms Hạ Mi - 0917.010.239
Gmail: hce33@hcetool.com
CÔNG TY TNHH Thương Mại H.C.E
Số 4, Đường 20, Phường An Phú, Quận 2,TP.Hồ Chí Minh
Tel: (84-8) 6251 5157 Fax: (84-8) 6251 5171
HẾT HẠN
| Mã số : | 14527568 |
| Địa điểm : | Hồ Chí Minh |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 17/07/2017 |
| Loại tin : | Thường |
Gợi ý cho bạn
Bình luận