Rp 810 Eck Van Giảm Áp Rp 810 Eck Atex Mankenber, Mankenber Viet Nam

Hotline: 0933.911.903

Mail: thietbicongnghiepltt@gmail.com

Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!

PRESSURE CONTROL
Pressure reducing valve RP 810 Eck
Pilot-operated pressure reducing valve

Technical data
echnical data

DescriptionDescription

Self-acting back pressure regulators are simple control valves offering accurate control while being easy to install and maintain. They control the pressure upstream of the valve without requiring pneumatic or electrical control
elements.
The pressure reducing valve RP 810 Eck is a pilot-operated regulating valve
consisting of a main valve with a pilot valve fixedly mounted on the cover
and a throttle block with integrated strainer, non-return valve and throttle
valves. The valve cone is either metallic or soft-sealed.
Once the outlet pressure has reached the pre-set nominal value, the pilot
valve starts to throttle. In doing so, the control pressure rises and pushes the
main valve piston to a regulating position. The throttles D1 and D2 serve to
optimise the regulating behaviour. The bypass equipped with a non-return
valve brings about rapid closure.
If the outlet pressure exceeds the nominal value, the pilot valve closes. The
control pressure is equivalent to the inlet pressure. The main valve closes
because the piston diameter is larger than the valve seat. In addition, the
spring also has a closing effect.
These valves are no shut-off elements ensuring a tight closing of the valve.
In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they may feature
a leakage rate in closed position in compliance with the leakage classes III
or V.

Standard
Standard
» Pilot valve made of stainless steel
» Throttle block with integrated strainer and throttle valves completely
made of stainless steel
» Internal piping made of stainless steel

Optionen
Optionen
» Damping for gas applications
» Hard-faced valve cone and seat
» Special materials such as duplex, super duplex, Hastelloy® or titanium,
others on request
» Various O-ring and seal materials suitable for your medium
» Special connections:
ANSI or JIS flanges, other connections on request
» Special versions on request

Technical specification

*overall length tolerances in acc. with DIN EN 558

* on request