Van Giảm Áp Dm 462 Mankenber, Mankenber Viet Nam

Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!

The pressure reducer DM 462

is a twin seat diaphragm-controlled spring-loaded proportional control valve which is primarily used for hygienic applications in the food processing and pharmaceutical industries.
A PTFE protective film renders the diaphragm physiologically safe and steamproof up to 180 °C. The valve cone is fitted with a soft seal. The valve does not require an external pilot line.
This valve is manufactured from deep-drawn stainless steel featuring excellent corrosion resistance. It contains virtually no dead pockets and is suitable for use in CIP and SIP systems. The angled design allows complete draining.

PRESSURE CONTROL

Pressure reducing valve DM 462
Valve for hygiene applications / ultrapure media for mdium flow rates
Technical data
Connection DN 25 - 80
Nominal pressure PN 2.5 - 10
Inlet Pressure* up to 8 bar
Outlet Pressure 0.3 - 5 bar
Kvs-value 4 - 70 m³/h
Temperature 180 °C
Medium liquid, gases and steam
*RT = -10 °C up to + 50 °C

Description

Self-acting pressure reducers are simple control valves offering accurate
control while being easy to install and maintain. They control the pressure
downstream of the valve without requiring pneumatic or electrical control elements.
The pressure reducing valve is a twin seat diaphragm-controlled springloaded proportional control valve which is primarily used for hygienic applications in the food processing and pharmaceutical industries. A PTFE protective foil renders the diaphragm physiologically safe and steamproof up to
180 °C. The valve cone is fitted with a soft seal. The valve does not require
an external pilot line.
This valve is manufactured from deep-drawn stainless steel featuring excellent corrosion resistance. It contains virtually no dead pockets and is suitable
for use in CIP and SIP systems. The angled design allows complete draining.
The spring module comprising spring cap, spring, adjusting screw, diaphragm and internal components, is connected to the valve body only by
means of a clamp ring and two bolts. Changing the diaphragm or the complete spring assembly for a different control range is very easy and without
special tools. The same applies to servicing and maintenance.
The outlet pressure to be controlled is balanced across the control unit by
the force of the valve spring (set pressure). As the outlet pressure rises
above the pressure set using the adjusting screw, the valve cone moves towards the seat and the volume of medium is reduced. As the outlet pressure
drops, the valve control orifice increases; when the pipeline is depressurised, the valve is open. Rotating the adjusting screw clockwise increases
the outlet pressure.
These valves are no shut-off elements ensuring a tight closing of the valve.
In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they may feature
a leakage rate in closed position in compliance with the leakage classes III
or V, optional IV.

Standard

» All stainless steel construction
» Clamping flanges DIN 32676
» Non rising adjusting screw
» Quick-release body clamp ring

Options

» Polished version for food, pharmaceutical and superclean applications
» surface roughness: Ra ≤ 0.25/ ≤ 0.4/ ≤ 0.8 µm
» Diaphragm protection by PTFE foil
» Soft seal
» Electro-pneumatic actuation
» For toxic or hazardous media: sealed bonnet complete with leakage line
connection (incl. sealed adjusting screw). Must be installed with a leakage line capable of draining leaking medium safely and without pressure
» Various diaphragm and seal materials suitable for your medium
» Special connections: Aseptic, ANSI or DIN flanges, NPT, welding spigots; other connections on request
» Special versions on request

Technical specification