Electro-Sensors Vietnam, Cảm Biến Đo Tốc Độ Vòng Quay Động Cơ, Tua Bin

Analog to frequency conversion module, 0-10 VDC and 4-20 mA inputs, 1-20 kHz output switch selectable. NPN open collector or driven output.

Sensor-input and relay-output modules with Modbus RTU network interface. 3 Models: Analog-In (12 inputs), Discrete I/O (6 inputs, 6 relay outputs) and Frequency/Discrete-In (12 inputs) All provide protected sensor power. All signal inputs are protected.

Digital signal conditioner provides Analog signal directly proportional to the speed of a rotating shaft. 0-10 VDC and 4-20 mA output signals.

Universal-Input Shaft Speed measurement with alarms (Shaft Speed Switch) and DeviceNet network interface

Hall Effect speed sensors powered by 5-24 VDC, provide NPN open collector output, compatible with PLC digital I/O. Stainless steel (1101) and explosion proof (931 XP).

Magnetoresistive speed sensors powered by 5-24 VDC with an NPN open collector output. Stainless steel, aluminum, and explosion proof models.

Proximity sensors are active digital sensing devices with full NPN output signal down to zero Hz. Outputs are CMOS compatible. Available in a wide range of voltages. Metal housing is corrosion-resistant.

Hall Effect digital speed sensors powered by 5-24 VDC, provide NPN open collector output, compatible with a PLC digital I/O. Aluminum, Stainless Steel, and PVC body types, high-temperature cable, and Quadrature options.

Hall Effect digital speed sensors powered by 5-24 VDC, provide NPN open collector output, compatible with a PLC digital I/O. 907 XP (Explosion Proof) sensors are used in applications requiring hazardous location ratings, or in applications where the sensor may be subject to abuse.

Model 916A and 917A Passive Analog Sensors are designed for use with pulse generators that provide magnetic targets, such as Pulser Discs and Split Collar Pulser Wraps.

The EZ-18mm and the EZ-3/4in Easy Mount Bracket Assemblies are used with Electro-Sensors speed sensors to generate pulses or 4-20 mA signals for use with display meters, speed switches, or PLC inputs. Pulser Disc included.

SPDT output relay and 4-20 mA output speed sensor and speed switch, housed in a explosion proof and NEMA 4X enclosure. Relay can be set for overspeed or underspeed. 24 VDC.

Gear tooth sensor powered by 5-24 VDC, provides an NPN open collector digital output signal. Senses frequency range up to 12 kHz. Threaded aluminum, NEMA 4 housing.

Hall Effect and Magnetoresistive sensors, single channel or bi-directional signaling, NPN and PNP transistor outputs, available with four housing options. FM Approved Intrinsically Safe

Shaft Speed Sensor with Alarms (Shaft Speed Switch) and DeviceNet network interface

Shaft Speed Sensor with Alarms (Shaft Speed Switch) and DeviceNet network interface

The ST420 is a 2-wire, loop-powered, 4-20 mA analog output shaft speed sensor in a rugged stainless steel M18x1 housing; UL Listed Intrinsically Safe (IS) for Class I Division I and Class II Division I hazardous locations.

The ST420-LT and ST420-DI are 2-wire, loop-powered, 4-20 mA analog output shaft speed sensors in rugged stainless steel M18x1 housings with integral conduit attachments; FM Approved Dust Ignition-Proof for Class II Division I hazardous locations.