Hic5861Y1 - Relay Module - Đại Lý Pepperl Fuchs
Liên hệ
78 Duy Tân
HiC5861Y1 - Relay Module - Đại Lý Pepperl Fuchs
Nhà sản xuất: Pepperl Fuchs
Nhà cung cấp: Newskyvn
Model : HiC5861Y1
Tên sản phẩm: Relay Module
Liên hệ để được tư vấn hỗ trợ Mr.Thanh:
Email: quangthanh@newskyvn.com
Zalo: 0965.130.856
Đại lý Pepperl Fuchs Việt Nam
THÔNG SỐ KỸ THUẬT CỦA HiC5861Y1
| General specifications | ||
|---|---|---|
| Signal type | Digital Output | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Performance level (PL) | PL e | |
| Supply | ||
| Connection | loop powered | |
| Rated voltage | 19 ... 30 V DC loop powered | |
| Power dissipation | < 1.3 W | |
| Power consumption | < 1.3 W | |
| Input | ||
| Connection side | control side | |
| Connection | Input SL1: 8a(+), 7a(-) ; test input SL1: 3a(-), 3b(+), 4a(+), 4b(+) | |
| Pulse/Pause ratio | 150 ms / 150 ms | |
| Test pulse length | max. 4 ms from DO card | |
| Test input | see Functional Safety Manual | |
| Signal level | 0-signal: -5 ... 5 V 1-signal: 19 ... 27.6 V | |
| Rated voltage | 19 ... 27.6 V loop powered | |
| Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) | |
| Output | ||
| Connection side | field side | |
| Connection | SL2: 5a, 7a; 1a, 3a | |
| Contact loading | 253 V AC/2 A/cos φ 0,7; 30 V DC/2 A resistive load | |
| Minimum switch current | 10 mA / 24 V DC | |
| Energized/De-energized delay | 150 ms / 150 ms | |
| Mechanical life | 2 x 107 switching cycles | |
| Fuse rating | 3.15 A | |
| Transfer characteristics | ||
| Switching frequency | < 3 Hz | |
| Galvanic isolation | ||
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 Veff | |
| Output/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 Veff | |
| Indicators/settings | ||
| Display elements | LEDs | |
| Labeling | space for labeling at the front | |
Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Low voltage | ||
| Directive 2014/35/EU | EN 61010-1:2010 | |
| Machinery Directive | ||
| Directive 2006/42/EC | EN 62061:2005 , EN/ISO 13849-1:2008 | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008 | |
| Degree of protection | IEC 60529:2013 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating. | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 100 g | |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) | |
| Mounting | on Termination Board | |
| Coding | no pin trimmed For further information see system description. | |
| Data for application in connection with hazardous areas | ||
| Certificate | PF 17 CERT 4312 X | |
| Marking |  II 3G Ex nC ec IIC T4 Gc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27210101 |
| ECLASS 10.0.1 | 27210101 |
| ECLASS 9.0 | 27210101 |
| ECLASS 8.0 | 27210101 |
| ECLASS 5.1 | 27210121 |
| ETIM 8.0 | EC001485 |
| ETIM 7.0 | EC001485 |
| ETIM 6.0 | EC001485 |
| ETIM 5.0 | EC001485 |
HẾT HẠN
0965 130 856
| Mã số : | 17159090 |
| Địa điểm : | Hà Nội |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 23/06/2023 |
| Loại tin : | Thường |
Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!
Bình luận