Liên hệ
D3, Kdc Miếu Nổi, Đinh Tiên Hoàng, Bình Thạnh,Tp. Hcm
ANS Vietnam - Địa lý phân phối Canneed Vietnam
Canneed Vietnam | BCC-200 |
Digital Beverage CO2 Calculator | |
Canneed Vietnam | DGM-200 |
Digital Beverage CO2 Calculator | |
Canneed Vietnam | Seam Sight-B |
Full Automatic Seam Monitor | |
* To test beverage cans | |
Canneed Vietnam | CSS-1000 |
Anti-noise Seam Saw | |
Canneed Vietnam | CSG-200 |
Countersink Gauge (Digital) | |
Suitable for end types from 113 to 307 | |
Canneed Vietnam | STG-200-D |
Seam thickness gauge(digital) | |
Applicable for can diameters of 50-190mm | |
Canneed Vietnam | TRC-200 |
Transporter of Computer | |
With two ports | |
Canneed Vietnam | CMDI |
Cable for Mitutoyo Digital Indicator | |
Canneed Vietnam | CMD-200S |
Can Measure Desk for Rear Stations | |
Canneed Vietnam | CAN-10774 |
Planer and Shaper Pin Height Gauge | |
CAN-10774-L77 , 77mm testing stick. | |
Range:10mm-106mm | |
Canneed Vietnam | CAN-1050-D |
Digital Can Closing Force Gauges | |
Canneed Vietnam | Accessory |
CAN-1050.A** | |
Adapters of CAN-1050-D for END dia. 59.44mm and 57.4mm. | |
Canneed Vietnam | Accessory |
CAN-1050.P** | |
Space blocks of CAN-1050-D | |
for can heights of 91.5 mm, 133 mm, 168 mm, | |
145.4 mm, 104.5 mm, 115.5 mm, 109.5 mm | |
Canneed Vietnam | Canneed-CSS-P3 |
Portable Seam Saw | |
with saw blade 63×0.5mm×120TX16 (CSS.488) | |
Canneed Vietnam | PDO-100 |
Portable Dissolved Oxygen Meter | |
Canneed Vietnam | BPT-4000 |
Ramp Pressure Tester (two stations) | |
Canneed Vietnam | CND-BPT4-1.0 |
Software BPT-4000 glass?bottle?pressure | |
testing? machine | |
Canneed Vietnam | Replaced Model: DGM-200 |
Digital Beverage CO2 Calculator | |
Note: Canneed upgraded the battery and the program of DGM-200. | |
(DGM-100) | |
Canneed Vietnam | AS-300D |
Digital AutoShaker Beverage CO2 Calculator | |
Canneed Vietnam | TLT-200 |
Top Load Tester | |
Canneed Vietnam | TLT-200-H** |
Space block of TLT-200 | |
Canneed Vietnam | TLT-CAL |
Calibration Cell for TLT-200 | |
Canneed Vietnam | CSM-208 |
Can Seam Micrometers (Fine-tuning) | |
Canneed Vietnam | CVG-200 |
Canners Vacuum Gauge | |
Include Analog vacuum gauge(with piercing | |
head), seal colloid, and rack plate | |
Canneed Vietnam | CanNeed-TDET-100 |
Data Transmitter | |
Canneed Vietnam | TDE-100-C** |
Temperature probe | |
Canneed Vietnam | TDE-100-CD** |
Can Fixture | |
Canneed Vietnam | Seam Sight-B |
Full Automatic Seam Monitor | |
Canneed Vietnam | CSS-1000 |
Anti-noise seam saw | |
Canneed Vietnam | STG-200-D |
Seam thickness gauge(digital) | |
Applicable for can diameters of 50-190mm | |
Canneed Vietnam | CSG-200 |
Countersink Gauge (Digital) | |
Suitable for end types from 113 to 307 | |
Canneed Vietnam | TRC-200 |
Transporter of Computer | |
With two ports | |
Canneed Vietnam | CMDI |
Cable for Mitutoyo Digital Indicator | |
Canneed Vietnam | CAN-SST-300 |
Secure seal tester,3 head | |
Canneed Vietnam | SST-C1 |
Concave piercing head | |
Canneed Vietnam | SST-S22X25X25 |
Rubber seal column, 21.7mm | |
Applicable for PET bottle with mouth inner diameter of 21.7, SST.056 | |
Canneed Vietnam | ST-C25 |
Pressure fixture assembly, 25mm | |
Applicable for measuring the PET bottle neck diameter =26mm, including #25 fixture, 25/28 space plate and connecting pipe | |
Canneed Vietnam | SST-K28 |
28mm Cut-off tool | |
Applicable for cutting bottle neck =28mm | |
Canneed Vietnam | HWC-100 |
Hot Wire Bottle Cutter | |
Suitable for Max bottle dia 100mm, Max bottle | |
height 370mm | |
Canneed Vietnam | CanNeed-TDET-100 |
Data Transmitter | |
Canneed Vietnam | TDE-100-CD** |
Can Fixture | |
Canneed Vietnam | TDE-100-C** |
Temperature probe | |
Probe length is **mm | |
Canneed Vietnam | Seam Sight-B |
Full Automatic Seam Monitor | |
Canneed Vietnam | CSS-1000 |
Anti-noise seam saw | |
Canneed Vietnam | STG-200-D |
Seam thickness gauge(digital) | |
Applicable for can diameters of 50-190mm | |
Canneed Vietnam | CSG-200 |
Countersink Gauge (Digital) | |
Suitable for end types from 113 to 307 | |
Canneed Vietnam | TRC-200 |
Transporter of Computer | |
With two ports | |
Canneed Vietnam | CMDI |
Cable for Mitutoyo Digital Indicator | |
Canneed Vietnam | CAN-SST-300 |
Secure seal tester,3 head | |
Canneed Vietnam | SST-C1 |
Concave piercing head | |
Canneed Vietnam | SST-S22X25X25 |
Rubber seal column, 21.7mm | |
Applicable for PET bottle with mouth inner diameter of 21.7, SST.056 | |
Canneed Vietnam | ST-C25 |
Pressure fixture assembly, 25mm | |
Applicable for measuring the PET bottle neck diameter =26mm, including #25 fixture, 25/28 space plate and connecting pipe | |
Canneed Vietnam | SST-K28 |
28mm Cut-off tool | |
Applicable for cutting bottle neck =28mm | |
Canneed Vietnam | HWC-100 |
Hot Wire Bottle Cutter | |
Suitable for Max bottle dia 100mm,Max bottle | |
height 370mm | |
Canneed Vietnam | CanNeed-TDET-100 |
Data Transmitter | |
Canneed Vietnam | TDE-100-C** |
Temperature probe | |
Probe length is **mm | |
Canneed Vietnam | KZJ-106-0501 |
KZJ-SST-2 main unit (TO INCLUDE | |
106-0205-T,106-MAN): | |
Secure Seal Tester | |
Canneed Vietnam | SST-C1 |
Concave piercing head | |
Applicable for piercing crown caps and PET | |
bottle caps and so on. | |
Canneed Vietnam | SST-C25 |
Pressure fixture assembly, 25mm | |
Applicable for measuring the PET bottleneck | |
diameter =26mm, including #25 fixture, 25/28 space plate, and connecting pipe | |
Canneed Vietnam | SST-S20.8X25X25 |
Rubber seal column, 20.3mm | |
Applicable for PET bottle with mouth inner | |
the diameter of 20.3, SST.058 | |
Canneed Vietnam | SST-K32 |
32mm Cut-off tool | |
Applicable for cutting bottle neck <=32mm | |
Canneed Vietnam | ND-SST-3 |
Secure Seal Tester | |
Canneed Vietnam | SST-C1 |
Concave piercing head | |
Applicable for piercing crown caps and PET | |
bottle caps and so on. | |
Canneed Vietnam | SST-C25 |
Pressure fixture assembly, 25mm | |
Applicable for measuring the PET bottleneck | |
diameter =26mm, including #25 fixture, 25/28 space plate, and connecting pipe | |
Canneed Vietnam | SST-S20.8X25X20 |
Rubber seal column, 20.3mm (short) | |
Applicable for PET bottle (short cap) with | |
mouth inner diameter of 20.3, SST.030 | |
Canneed Vietnam | SST-K32 |
32mm Cut-off tool | |
Applicable for cutting bottle neck =32mm | |
Canneed Vietnam | Seam Sight-B |
Full Automatic Seam Monitor | |
* To test beverage cans | |
Canneed Vietnam | CSS-100B |
Anti-noise seam saw | |
Suitable for cans with diameter 65mm | |
Canneed Vietnam | STG-200-D |
Seam thickness gauge(digital) | |
Applicable for can diameters of 50-190mm | |
Canneed Vietnam | CSG-200 |
Countersink Gauge (Digital) | |
Suitable for end types from 113 to 307 | |
Canneed Vietnam | CMDI |
Cable for Mitutoyo Digital Indicator | |
Canneed Vietnam | TRC-200 |
Transporter of Computer | |
With two ports | |
Canneed Vietnam | MDER-10 |
Multi-station Digital Enamel Rater for Ends (10 | |
Stations) | |
Canneed Vietnam | MDER-S202 |
202 Sealing element for MDER | |
10pcs/set, DER.114 | |
Canneed Vietnam | DER.121 |
200 End Sealing Element for MDER | |
10pcs/set | |
Canneed Vietnam | DER-400-M |
Digital Enamel Rater Mainframe | |
Canneed Vietnam | DER-CH-2P-N |
Can Holder(for 2P cans) | |
For DER-400 | |
Canneed Vietnam | CMD-200S |
Can Measure Desk for Rear Stations | |
Can Measure Desk for Rear Stations | |
To test the flange width, can height, inner | |
Diameter.4 stations. | |
Equipped with digital Mituyoto dial indicator | |
With adapter and cable, data can be output to | |
PC or SPC | |
Canneed Vietnam | Seam-Xline-100 |
Seam-X®-Line-100 Automatic X-ray | |
Seam Scanner (Non-destructive &Auto Sampling) | |
Canneed Vietnam | Seam Sight-B |
Full Automatic Seam Monitor | |
Canneed Vietnam | CSS-100B |
Anti-noise seam saw | |
Suitable for cans with diameter 65mm | |
Canneed Vietnam | STG-200-D |
Seam thickness gauge(digital) | |
Applicable for can diameters of 50-190mm | |
Canneed Vietnam | CSG-200 |
Countersink Gauge (Digital) | |
Suitable for end types from 113 to 307 | |
Canneed Vietnam | CMDI |
Cable for Mitutoyo Digital Indicator | |
Canneed Vietnam | PEPT-100 |
Perpendicularity Tester for PET Bottle (Digital) | |
Include Mitutoyo digital indicator, calibration column; applicable for measuring the max.height 340mm, the diameter is less 115mm | |
Canneed Vietnam | HWC-100 |
Hot Wire Bottle Cutter | |
Suitable for Max bottle dia 100mm,Max bottle | |
height 370mm | |
Canneed Vietnam | |
Canneed Vietnam | CSS-1000 |
Anti-noise seam saw | |
Canneed Vietnam | KZJ-106-0501 |
KZJ-SST-2 main unit (TO INCLUDE | |
106-0205-T,106-MAN): | |
Secure Seal Tester | |
Canneed Vietnam | CAN-10774 |
Planer and Shaper Pin Height Gauge | |
CAN-10774-L77, 77mm testing stick. | |
Range:10mm-106mm | |
Canneed Vietnam | SST-C1 |
Concave piercing head | |
Applicable for piercing crown caps and PET | |
bottle caps and so on. | |
Canneed Vietnam | SST-C25 |
Pressure fixture assembly, 25mm | |
Applicable for measuring the PET bottleneck | |
diameter =26mm, including #25 fixture, 25/28 space plate, and connecting pipe | |
Canneed Vietnam | SST-S20.8X25X25 |
Rubber seal column, 20.3mm | |
Applicable for PET bottle with mouth inner | |
the diameter of 20.3, SST.058 | |
Canneed Vietnam | Model: SST-K32 |
32mm Cut-off tool | |
Applicable for cutting bottle neck <=32mm | |
Canneed Vietnam | CND-SST-3 |
Secure Seal Tester | |
* Main unit of CND-SST-3, blue panel & stand | |
column, high-quality pressure valve, includes | |
water tank | |
* Not include piercing head, rubber seal | |
column, PET bottle cap clamps, cut-off tool | |
Canneed Vietnam | BWTG-200 |
Bottle Wall Thickness Gauge (Digital) |
Quí khách có nhu cầu vui lòng liên hệ:
Hot line: 0916551124 (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com
Blogger | Sites | Wordpress
https://towaseidenvietnam-congtacmuc.gianhangvn.com/
https://sankovietnam.gianhangvn.com/
https://minarikdrivesvietnam.gianhangvn.com/
https://eurothermvietnam.gianhangvn.com/
https://egeelektronikvietnam.gianhangvn.com/
HẾT HẠN
Mã số : | 15713659 |
Địa điểm : | Toàn quốc |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 24/08/2019 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận