Mô tả sản phẩm: MOXA VPort 351 1-Channel Industrial Video Encoder
› Industrial design with -40 to 75°C operating temperature and fiber
optic Ethernet port
›Video stream up to 30 frames/sec at full D1 (720 x 480) resolution
›Pre/post-alarm video recording function for advanced surveillance
›Transparent PTZ control for legacy PTZ control panels and
keyboards
›2-way (1 in, 1 out) audio supported
›Free VPort SDK PLUS supported
Video
Video Compression:
MJPEG or MPEG4 (ISO/IEC 14496-2)
Video Inputs:
1, BNC connector (1.0 Vpp, 75 ohm)
Video Outputs:
1, loop-through BNC connector (1.0 Vpp, 75 ohm)
NTSC/PAL:
Auto-sensing or manual
Video Resolution and FPS (frames per second)
QVGA
320 x 240
30
320 x 288
25
CIF
352 x 240
30
352 x 288
25
VGA
640 x 480
30
640 x 576
25
4CIF
704 x 480
30
704 x 576
25
Full D1
720 x 480
30
720 x 576
25
Video Viewing:
• Adjustable image size and quality
• Timestamp and text overlay
Audio
Audio Inputs:
1 Line-in or MIC-in with 3.5 mm phone jack
Audio Outputs:
1 Line-out with 3.5 mm phone jack
Audio Format:
Mono, PCM
Network
Protocols:
TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet:
1 10/100BaseT(X) auto negotiating RJ45 port, or 1
100BaseFX fiber port (Single/multi mode, SC connector)
Serial Port
PTZ Ports:
1, RS-232/422/485 port (terminal block connector),
max. speed of 115.2 Kbps
Console Port:
1, RS-232 RJ45 port
GPIO
Digital Inputs:
2, max. 8 mA
Low: +13 V to +30 V; High: -30 V to +3 V
Relay Outputs:
2, max. 24 VDC @ 1 A
LED Indicators
STAT:
Indicates if the system booted properly or not
PWR1:
Power 1
PWR2:
Power 2
FAULT:
Can be configured to correspond to system alarm, power
failure, or disconnected network
VIDEO:
Video input signal active
AUDIO TEST:
Audio input signal in test mode
PTZ:
PTZ control signal active
Power Requirements
Input Voltage:
2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption:
Max. 8 W
Physical Characteristics
Housing:
Metal, IP30 protection
Dimensions:
52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight:
960 g (2.11 oz)
Installation:
DIN-Rail mounting, wall mounting (with optional kit)
Alarms
Pre/Post Alarm:
9 MB memory for video recordings
Video Motion Detection:
Includes sensitivity tuning
Video Loss:
Video loss alarm
Scheduling:
Daily repeat timing schedule
Imaging:
JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging:
Automatic transfer of stored images via email
or FTP with event-triggered actions
Custom Alarms:
HTTP event servers for setting customized alarm
actions
PAN/TILT/ZOOM
PTZ Camera Control:
Via RS-232/422/485 PTZ port
PTZ Control Functions:
PAN, TILT, ZOOM, FOCUS, moving speed,
preset position (max. 25 positions), and 10 custom commands
PTZ Function Updates:
Driver upload supported
Supported Device Protocols:
Pelco D, Pelco P, Dynacolor DynaDome,
Custom Camera
Transparent PTZ Control:
Control PTZ cameras with legacy PTZ
control panel or keyboard connected to a PC or VPort decoder
Security
Password:
User level password protection
Filtering:
By IP address
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Standards and Certifications
Safety:
UL 508
Hazardous Location:
UL/cUL Class I Division 2 Groups A/B/C/D
EMI:
FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
EN 61000-4-2 (ESD), Level 2,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Marine:
DNV, GL, LR, ABS, NK
Shock:
IEC 60068-2-27
Freefall:
IEC 60068-2-32
Vibration:
IEC 60068-2-6
Note: Please check Moxa’s website for the most up-to-date certification status.
MTBF
(mean time between failures)
Time:
272,000 hrs
Database:
Telcordia (Bellcore), GB 25°C
Warranty
Warranty Period:
5 years
Details:
See www.moxa.com/warranty
Software Development Kit
VPort SDK PLUS:
Includes CGI commands, ActiveX Control, and API
library for customized applications or system integration for third-party
developers (the latest version of SDK is available for download from
Moxa’s website)
Optional Accessories
(can be purchased separately)
SoftNVR-IA V3.0:
64-channel IP surveillance software for industrial automation applications
DR-4524/75-24/120-24:
45/75/120 W DIN-Rail 24 VDC power supplies
MDR-40-24/60-24:
40/60 W DIN-Rail 24 VDC power supplies, -20 to 70°C operating temperature
WK-46:
Wall mounting kit
RK-4U:
4U-high 19” rack mounting kit
• Adjustable image size and quality
• Timestamp and text overlay
Audio
Audio Inputs:
1 Line-in or MIC-in with 3.5 mm phone jack
Audio Outputs:
1 Line-out with 3.5 mm phone jack
Audio Format:
Mono, PCM
Network
Protocols:
TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet:
1 10/100BaseT(X) auto negotiating RJ45 port, or 1
100BaseFX fiber port (Single/multi mode, SC connector)
Serial Port
PTZ Ports:
1, RS-232/422/485 port (terminal block connector),
max. speed of 115.2 Kbps
Console Port:
1, RS-232 RJ45 port
GPIO
Digital Inputs:
2, max. 8 mA
Low: +13 V to +30 V; High: -30 V to +3 V
Relay Outputs:
2, max. 24 VDC @ 1 A
LED Indicators
STAT:
Indicates if the system booted properly or not
PWR1:
Power 1
PWR2:
Power 2
FAULT:
Can be configured to correspond to system alarm, power
failure, or disconnected network
VIDEO:
Video input signal active
AUDIO TEST:
Audio input signal in test mode
PTZ:
PTZ control signal active
Power Requirements
Input Voltage:
2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption:
Max. 8 W
Physical Characteristics
Housing:
Metal, IP30 protection
Dimensions:
52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight:
960 g (2.11 oz)
Installation:
DIN-Rail mounting, wall mounting (with optional kit)
Alarms
Pre/Post Alarm:
9 MB memory for video recordings
Video Motion Detection:
Includes sensitivity tuning
Video Loss:
Video loss alarm
Scheduling:
Daily repeat timing schedule
Imaging:
JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging:
Automatic transfer of stored images via email
or FTP with event-triggered actions
Custom Alarms:
HTTP event servers for setting customized alarm
actions
PAN/TILT/ZOOM
PTZ Camera Control:
Via RS-232/422/485 PTZ port
PTZ Control Functions:
PAN, TILT, ZOOM, FOCUS, moving speed,
preset position (max. 25 positions), and 10 custom commands
PTZ Function Updates:
Driver upload supported
Supported Device Protocols:
Pelco D, Pelco P, Dynacolor DynaDome,
Custom Camera
Transparent PTZ Control:
Control PTZ cameras with legacy PTZ
control panel or keyboard connected to a PC or VPort decoder
Security
Password:
User level password protection
Filtering:
By IP address
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Standards and Certifications
Safety:
UL 508
Hazardous Location:
UL/cUL Class I Division 2 Groups A/B/C/D
EMI:
FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
EN 61000-4-2 (ESD), Level 2,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Marine:
DNV, GL, LR, ABS, NK
Shock:
IEC 60068-2-27
Freefall:
IEC 60068-2-32
Vibration:
IEC 60068-2-6
Note: Please check Moxa’s website for the most up-to-date certification status.
MTBF
(mean time between failures)
Time:
272,000 hrs
Database:
Telcordia (Bellcore), GB 25°C
Warranty
Warranty Period:
5 years
Details:
See www.moxa.com/warranty
Software Development Kit
VPort SDK PLUS:
Includes CGI commands, ActiveX Control, and API
library for customized applications or system integration for third-party
developers (the latest version of SDK is available for download from
Moxa’s website)
Optional Accessories
(can be purchased separately)
SoftNVR-IA V3.0:
64-channel IP surveillance software for industrial automation applications
DR-4524/75-24/120-24:
45/75/120 W DIN-Rail 24 VDC power supplies
MDR-40-24/60-24:
40/60 W DIN-Rail 24 VDC power supplies, -20 to 70°C operating temperature
WK-46:
Wall mounting kit
RK-4U:
4U-high 19” rack mounting kit
